Condition: ready for operation (used), Year of construction: 2017, General Data Machine weight 250 kg Controller Model CS8C-RX160 Main Drive Number of axis 6 Fsdpfjx D Sfqsx Ag Djpd Table Table load 28 kg This 6-axis STAUBLI RX160 L robot arm was manufactured in 2017. It features a maximum load capacity of 28 kg and a reach of up to 2010 mm. Equipped with a CS8C-RX160 controller and a robot stand, it offers high flexibility with motion ranges up to ±270° on several axes and speeds reaching 870°/s on Axis 6. Ideal for tasks requiring precision and range. Contact us for more information about this machine. Application Types Robotics

Condition: ready for operation (used), Year of construction: 2017, Main Drive Max payload 35 kg Fodpfox R E Risx Ag Depd Additional Equipment Includes console and control This STAUBLI TX60 robot arm was manufactured in 2017. It includes a CS8C-TX60 controller and console, with a payload capacity of 3.5kg. Consider the opportunity to buy this STAUBLI TX60 robot arm. Contact us for more information. Application Types Robotics

Year of construction: 2019, condition: ready for operation (used), This TGT Robby 900 XL was manufactured in 2019. It features a Palfinger crane 1500, a forklift lift of 1.8 m, and a Honda engine. The machine is installed on a crawler chassis with a telescopic width and offers a working height of approximately 6.5 m. It has a crane load capacity of up to 900 kg and a fork load capacity of 2000 kg. Contact us for more information about this machine. Application Types Other Automation Equipment Fodpsx D Htvsfx Ag Dspd

Condition: ready for operation (used), Year of construction: 2016, operating hours: 373 h, This STAUBLI RX160 was manufactured in 2016. It is a robot arm in very good condition, almost like new, with only 373 operating hours. It includes a controller and a handheld control unit. Consider the opportunity to buy this STAUBLI RX160 robot arm. Contact us for more information. Fpjdex D Sd Hepfx Ag Ded Application Types Robotics

Condition: ready for operation (used), Year of construction: 2024, General Data Machine weight 41 kg Control Unit Brand FANUC Main Drive Fjdpfjx D Ezlsx Ag Dopd Number of axis 6 This 6-axis FANUC CRX-20iA/L robot arm was manufactured in 2024. It features a maximum load capacity of 20 kg and a reach of 1418 mm. The robot's joints have extensive motion ranges, enhancing its flexibility for complex tasks. If you are looking to get high-quality automation capabilities, consider the FANUC CRX-20iA/L machine we have for sale. Contact us for more information. Application Types Robotics

Condition: used, Year of construction: 2016, operating hours: 9,650 h, We are offering a KUKA KR150 R3100 Ultra KRC4 Fodpfx Agomdrnqe Depd with 6700 working hours Also, we are offering to overhaul the robot.

Condition: refurbished (used), functionality: fully functional, ABB IRB 660 with IRC5 Controller - fully refurbished and with 6 months warranty - delivered into Europe duty paid so no need to worry. Fpedpfx Aeyi Iffjg Djd

Condition: used, GRUNDIG STEUERUNGSEINH. STE02 9.44209-1201 Fpsdpfx Agjymqvuo Djd

Condition: used, DMG Mori Panel 85-240VAC 0,3A 2386389 ( 110498 ) Fpedpfoymqu Rsx Ag Djd ID-No.: 2386389 Suppl.: 110498

Condition: new, height / mm working width / mm distance to reflector / mm SICK safety light curtains C4000 C40S-1301AA030 + C40E-1301BH030 Transmitter: C40S-1301AA030 Receiver: C40E-1301BH030 Operating range: 0 - 5 m Condition: New Fsdpfx Aoymqrvjg Dspd

Condition: used, Type: A06B-6127-H109 Works flawlessly. Fedpfx Ageymqrcs Depd

Condition: used, SIEMENS 6SE7015-0EP50-Z Fpjdjymqqlopfx Ag Dod

Condition: used, SIEMENS 6SC6110-7VA01 Fpjdpfeymqp Isx Ag Dsd

Condition: good (used), Position processor, SLAVE CPU POSITIONING -Manufacturer: SCHLEICHER, 2-axis positioning assembly -Type: USP21 -No.: 31506913-310 -Number: 2 modules available -Price: per piece -Dimensions: 150/35/H200 mm Fsdpfxjymltbj Ag Djpd -Weight: 0.6 kg/pc.

Condition: new, power capacity / kW volt / V ampere / A PROMESS 804-0001-070 measuring computer Condition: Used (in working order) Fedpjymgbmsfx Ag Dspd

Condition: new, Year of construction: 2025, functionality: fully functional, For sale is a new ABB IRB 6700-150/3.20 >>ORIGINAL PACKAGING, YEAR OF MANUFACTURE 2025 Manipulator: 435-114 Variant: IRB 6700-150/3.20 209-202 Manipulator color: ABB Graphite White standard 287-4 Version: Standard version 334-1 ABB logo on manipulator: With ABB logo 1999-1 Standard calibration method: Axis Calibration Base: 700-3 Controller model IRC5: Single Cabinet Controller IRC5 129-1 Electromagnetic compatibility (EMC): Prepared for CE marking 769-2 Supply voltage: 400V supply voltage 752-2 Power connection: Power connection via HAN HSB 6p+E plug 742-1 Main switch: Main rotary switch 708-1 Control cabinet ambient temperature: Control cabinet ambient temperature up to max. 45°C 741-1 Plug field cover: Plug field cover for one field 438-1 Warranty period: Warranty period after delivery 18 months (partner)/12 months (end customer) Floor cables: 210-2 Manipulator cable: 7 m manipulator cable 16-1 Customer signal interface: Customer signal interface connected to control cabinet 94-1 Customer signal cable: 7m customer signal cable 859-1 Customer signal cable, ProfiNet: 7m customer signal cable, ProfiNet Control unit: 701-1 FlexPendant: FlexPendant with 10m connection cable 888-2 Profinet I/O: ProfiNet I/O Master/Slave software 941-1 Ethernet switch: Ethernet switch 1541-1 Base Dig. 16In/16Out: Base module Digital IO 16 In / 16 Out 1550-1 Conv.Tracking unit Int.: Conveyor Tracking unit Int. 1 727-1 Power supply 24V: Power supply 24V, 8A 731-1 Safety signals: Safety signals internal 996-1 Safety Module: Safety Module 997-1 Safety Network: PROFIsafe F-Device 1125-2 Safety Robot Supervision: SafeMove Pro 733-1 Operators panel: Operator panel on control cabinet 735-2 Operating mode selector switch: Operating mode selector switch with 2 positions for drive units 736-1 Service socket: Service socket 230V ROBOTWARE: 685-2 Robotware Version: Operating system RobotWare 6 606-1 Conveyor Tracking: Software option Conveyor Tracking Fjdpfx Ajyr R Egjg Dopd 608-1 World Zones: Software option World Zones 611-1 Path Recovery: Software option Path Recovery 613-1 Collision Detection: Software option Collision Detection 623-1 Multitasking: Software option Multitasking Process: 455-8 Application signals: Parallel and Ethernet 778-1 DressPack process configuration: for material handling 798-3 DressPack variant: Base to axis 3 458-1 Mating connector set for user signals on axis 1 to 3 incl. BUS (CP/CS/BUS): Mating connector set for user signals on axis 3 incl. BUS (CP/CS/BUS) GENERAL: 448-2 Delivery project: Expanded Offer

Condition: used, Year of construction: 2018, functionality: fully functional, Rated voltage: 220/380 V; Current: 30 A. The vacuum forming machine comes with its own wood cutter/former (see pictures). Fedpjxzzupjfx Ag Depd

Condition: excellent (used), Year of construction: 2019, operating hours: 7 h, ABB IRB2600+Trackmotion 2.9 meter,complete as new DTC 7 hours 2019 DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Fedpfx Agjyl Avqe Djpd

Condition: excellent (used), 3HAC025338-002 Main Servo Drive Unit , DSQC 617 D6_2E2C2B,20% discount at order more then 1 unit. DEVELOPMENT OF GSG ROBOTICS Fpjdpfx Asyl Av Dsg Djd GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), ABB DSQC679 IRC5 Teachpendant,20% discount at order more then 1 unit DEVELOPMENT OF GSG ROBOTICS Fjdpfx Agoyl Avko Depd GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), 3HAC029818-001 DSQC663 HV MDU Power unit Fodpsyl Avwefx Ag Djpd DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: good (used), Year of construction: 2000, Robot is fully functional. Fpsdpjyrzbrofx Ag Dod

Condition: used, Year of construction: 2005, We are offering this rarely used robot for sale. It was utilized for research purposes. The robot is also equipped with a "backpack" containing a PLC and various pneumatic valves, among other components. Additionally, a pedestal extension and widening of approximately 100mm are included. Fedpfx Ageyr S Nye Depd Please submit your price offer and allow us some time to respond, as we handle this alongside our regular duties. The unit has been dismantled and is stored on pallets. All steps and requirements necessary for transport are to be covered at the buyer's own cost and risk. The buyer is liable for any (consequential) damages that may occur on the premises. Pick-up must be completed within 14 days after the sale.

Condition: excellent (used), Year of construction: 2018, Cellro Xcelerate X20 (Robot) Control: Fanuc Year of manufacture: 2018 Xcelerate X20 - Frame - Robot: Fanuc M-20 iA 20M - Primary safety circuit (redundant - 2x) - Panel to reduce the safety zone Fpsdpfx Aeylv Tisg Djd - Signal lamp - Tablet PC - Automatic gripper change - Manual grip force adjustment - I/O module (14 IN / 14 OUT) - Gripper magazine - Internal valve terminal - Remote maintenance modem - Floor scanner - Premium controls - High-quality dialogue control on touch screen - Including robot software options: High Sensitive Collision Detection, Auto Singularity Avoidance, Softfloat - DCS Position / Speed Check Function Drawer module with 3 drawers - Driven by spindle motors - Drawer size: 1200 mm x 600 mm (W x D) - Max. workpiece height: 165 mm - Max. load per drawer: 200 kg 3 Standard product inlays - Product dimensions: 0 mm to 160 mm Transfer and centering module - Module for flipping and centering workpieces Interchangeable 3-point double gripper (standard) - incl. blow-off function – for cleaning the clamping device Interchangeable 3-point double gripper (standard) Interchangeable 2-point double gripper Quick-change system for gripper fingers - Additional module allowing fast finger changes Universal short finger set X20 (2x) - Workpiece dimensions: 1-160 mm Z=35 mm

Condition: new, Year of construction: 2025, functionality: fully functional, spindle speed (max.): 60,000 rpm, type of input current: AC, table length: 320 mm, table width: 560 mm, warranty duration: 12 months, working width: 560 mm, working length: 320 mm, number of axes: 3, The compact table version LOW MINI was specially developed for separating panels for small-format series, for small series with large formats, and for cost-conscious manufacturing. PCB materials with remnant web connections can be quickly and economically separated up to a size of 320 mm x 560 mm. The separation process is servo-controlled on all axes, with the milling drive from above. Switching the working area from small (320x280mm) to large (320x560mm) format is the highlight of the machine, thanks to its simple and uncomplicated operation. • Short cycle time due to shuttle operation • X/Y axes with linear motor technology • Panel fixation with pin technology • Flexible handling Fodpfx Asxmfdxog Djpd • PCBs with remnant web connections • Milling spindle adjustment with servo technology • Extraction device • Easy operation • Optimal price-performance ratio Manual panel separation – flexible and cost-effective The concept of manual panel separation offers enormous advantages when it comes to flexibility and cost. Medium production volumes can be separated quickly and with low dust using the LOW MINI. Standard is 2-way loading with linear motor technology; to enlarge the working area, operation with a single shuttle is possible. The maintenance and user-friendliness combined with the excellent price-performance ratio allows for pleasant working conditions and also makes investing in this panel separator economically worthwhile. Axis speed 160mm/s Repeat accuracy 0.02 mm Separation accuracy 0.1mm Shank tool 0.8 - 2.4mm