Carpenter's clamps

Ściski stolarskie

Condition: new, Cutting range: round 0°: 170 mm square 0°: 150 x 150 mm flat 0°: 150 x 190 mm round 45°: 125 mm square 45°: 95 x 120 mm working height : 870 mm cutting speeds : 40 / 80 m/min saw band: 2080 x 20 x 0,9 mm coolant pump: 100 W saw motor: 0,75 kW connection: 400 V dimensions L x W x H, approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow can be tilted up to 45°. - With 2 saw blade speeds for optimum adaptation to the workpiece - Ideal for cutting tubes, profile material as well as solid material made of VA, iron, etc. Cgsdpoilk H Tofx Afnjn - Generously dimensioned saw arm for low-vibration work - Lowering of the saw arm via hydraulic lowering cylinder - Low noise level due to stable design - Switch-off after end of cut by micro limit switch - Quick-action vice for simple and fast workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - Coolant system with pump - Incl. base frame - CE/IEC, German documentation and German service Scope of delivery: - BiMetal saw band 2080 x 20 x 0.9 mm, 6/10 ZpZ - Band tension adjustable via manometer - quick clamping vice - material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic limit stop after end of cut - underframe

Condition: ready for operation (used), Planer (four-sided planer) Constant table Max. planing width: 605 mm Planing height 2-sided: 200 mm Planing height 4-sided: 200 mm Feed rate: 7 - 9 - 11.5 - 14.0 - 18.0 - 23.0 m/min OPTION: Feed speed up to approx. 50 m/min Motors Bottom cutterhead: 7.5 kW Top cutterhead: 11.0 kW Right vertical spindle: 11.0 kW / D 40 mm Left vertical spindle: 11.0 kW / D 40 mm 5th horizontal spindle: 15.0 kW Feed: 2.4 / 3.0 kW Thicknessing: 1.1 kW Cutterheads with 6 knives For feed speeds up to 24 m/min, 3 knives are sufficient 3 knives operating, and 3 sharp knives are in reserve position Additional unit: 5th working shaft horizontal 15 kW Outfeed unit roller width: 350 mm Machine is sold in condition A, B or C: A) as is B) repaired C) repaired and with new electrics Codpfswg S Tvsx Afnegn OPTION Pre-planer at the machine infeed with planing head width of 200 mm and 3.5 kW motor

Condition: ready for operation (used), Year of construction: 1984, Press force: 3600kN, press force stroke: 1.7mm, press work capacity: 6120J. Stroke: 60mm, installation height: 340mm. Table clamping width/depth: 440mm/525mm, tool holder width/depth: 440mm/320mm. Dimensions X/Y/Z: 1300mm/2000mm/2230mm, weight: approx. 6300kg. Cgodor A Eifepfx Afnen

Condition: reconditioned (used), Connected load 380V 13A 5.5kW main drive motor + 0.7kW feed motor, planing width 630 mm, Tersa cutterblock with 4 knives, stepless feed 6-18 m/min, star-delta switch, mechanical table height adjustment via hand lever, drive via cutterblock, fine adjustment by handwheel, mechanical digital display for planing height, 1x table roller, extraction connection 160 mm, 1x steel infeed roller, 1x steel outfeed roller. Cgedoxdl U Espfx Afnsn

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces Codpsuz Hmxefx Afnegn - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: used, Year of construction: 1979, functionality: fully functional, working height: 2,400 mm, working width: 3,500 mm, power: 1.5 kW (2.04 HP), 3 vertical, 2 lateral pressure cylinders Condition: function tested, very good, used Cedew Hlt Nspfx Afnjgn

Condition: used, Technical data: Track width: 400 mm Max cutting height: 150 mm Max saw blade diameter: 450 mm Min element length: 700 mm Smooth feed regulation Automatic lubrication system Cjdpfx Afeh Tkbkenegn Antireflection protection Extraction port: 300 mm Safety switch Power supply: 380 V Main engine power: 55 kW Overall dimensions: Length: 2000 mm Width: 2120 mm Height: 1860 mm

Condition: good (used), Year of construction: 1985, functionality: fully functional, type of input current: three-phase, Lenght :10400mm/ piece Roller lenght: 1000 mm Roller diameter : 90 mm Space between rollers: 120mm Cgedpfxodbacvj Afnon Weight cca: 1800kg Stock: approx. 70m!! diferent sizes.

Condition: new, Cutting capacity round 0°: 127 mm Cutting capacity flat 0°: 125 x 130 mm Cutting capacity round 45° right: 90 mm Cutting capacity square 45° right: 90 x 90 mm Cutting capacity round 60° right: 45 mm Cutting capacity square 60° right: 45 x 45 mm Vice opening: 130 mm Saw blade dimensions: 1440 x 13 x 0.65 mm Codpfoilk Ekox Afnegn Cutting speed: 60 m/min Motor output: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Features: - Saw bow swivels up to 60° - Ideal for cutting tubes, profiles, and solid material made of stainless steel, iron, etc. - Sturdy saw arm for low-vibration operation - Low-noise due to robust construction - Automatic shut-off after cutting cycle via microswitch - Quick-release vice for fast and easy clamping of workpieces - Precise, adjustable blade guides for optimal cutting results - Environmentally friendly—no need for lubricants or coolants - Lightweight design makes it ideal for use on construction sites - Base frame available as an optional extra (not included in delivery) Includes: - Saw blade 1440 x 13 x 0.65 mm - Material stop - Ergonomic handle Base frame available for an additional charge: 129 Euro (net, special price)

Condition: like new (used), Year of construction: 2022, How do you do? We are offering you our cross-cut saw from MS Maschinenbau in very good condition. Technical data: Lengths between 600 mm - 3000 mm Workpiece thickness min. 3 mm max. 100 mm feed 5-30 m/min stepless Roller table is included Codpfx Astykw Ssfnjgn Condition is as good as new If you are interested, the machine can also be tested. If you have any questions, please contact us.