Horizontal band saw

MIOTAL® S 150 G

Condition: new, Cutting range: round 0°: 170 mm square 0°: 150 x 150 mm flat 0°: 150 x 190 mm round 45°: 125 mm square 45°: 95 x 120 mm working height : 870 mm cutting speeds : 40 / 80 m/min saw band: 2080 x 20 x 0,9 mm coolant pump: 100 W saw motor: 0,75 kW connection: 400 V dimensions L x W x H, approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow can be tilted up to 45°. - With 2 saw blade speeds for optimum adaptation to the workpiece - Ideal for cutting tubes, profile material as well as solid material made of VA, iron, etc. - Generously dimensioned saw arm for low-vibration work - Lowering of the saw arm via hydraulic lowering cylinder - Low noise level due to stable design - Switch-off after end of cut by micro limit switch - Quick-action vice for simple and fast workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - Coolant system with pump - Incl. base frame - CE/IEC, German documentation and German service Scope of delivery: - BiMetal saw band 2080 x 20 x 0.9 mm, 6/10 ZpZ - Band tension adjustable via manometer Fsdpfxoilk H Ts Afnsfu - quick clamping vice - material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic limit stop after end of cut - underframe

Condition: ready for operation (used), Planer (four-sided planer) Constant table Max. planing width: 605 mm Planing height 2-sided: 200 mm Planing height 4-sided: 200 mm Feed rate: 7 - 9 - 11.5 - 14.0 - 18.0 - 23.0 m/min OPTION: Feed speed up to approx. 50 m/min Motors Bottom cutterhead: 7.5 kW Top cutterhead: 11.0 kW Right vertical spindle: 11.0 kW / D 40 mm Left vertical spindle: 11.0 kW / D 40 mm 5th horizontal spindle: 15.0 kW Ffsdpjwg S Tvefx Afnsu Feed: 2.4 / 3.0 kW Thicknessing: 1.1 kW Cutterheads with 6 knives For feed speeds up to 24 m/min, 3 knives are sufficient 3 knives operating, and 3 sharp knives are in reserve position Additional unit: 5th working shaft horizontal 15 kW Outfeed unit roller width: 350 mm Machine is sold in condition A, B or C: A) as is B) repaired C) repaired and with new electrics OPTION Pre-planer at the machine infeed with planing head width of 200 mm and 3.5 kW motor

Condition: reconditioned (used), reinforced gray cast iron table, tiltable balanced cast iron wheels precise upper & lower blade guide Work table dimensions approx. 680 x 580 mm Cast iron wheel diameter 600 mm Max. cutting height 340 mm Max. cutting width approx. 540 mm Fsdov Dg A Ujpfx Afnofu Three-phase motor approx. 2.2 kW, 50 Hz, 400 V

Condition: ready for operation (used), Year of construction: 1984, Press force: 3600kN, press force stroke: 1.7mm, press work capacity: 6120J. Stroke: 60mm, installation height: 340mm. Table clamping width/depth: 440mm/525mm, tool holder width/depth: 440mm/320mm. Dimensions X/Y/Z: 1300mm/2000mm/2230mm, weight: approx. 6300kg. Fjdpfx Afjr A Eifonsfu

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Ffodpfsd Du T Isx Afnju Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Vise with quick locking • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Condition: used, Year of construction: 1996, cutting diameter 260 mm saw band length 2910 mm cutting width 0,9 mm capacity 45 degrees: round 200 mm Ffodpfxotqql Ts Afnou capacity 90 degrees: square 260 x 260 mm capacity 90 degrees: flat 300 x 260 mm capacity 60 degrees: round 165 mm capacity 60 degrees: square 150 x 150 mm capacity 60 degrees: flat 160 x 120 mm cutting speed 35 / 70 m/min dimensions of saw-band 2910 x 27 x 0,9 mm height of material-table 950 mm total power requirement 2,0 kW weight of the machine ca. 400 kg dimensions of machine L x W x H 1,70 x 0,90 x 1,67 Accessories: coolant

Condition: reconditioned (used), Connected load 380V 13A 5.5kW main drive motor + 0.7kW feed motor, planing width 630 mm, Tersa cutterblock with 4 knives, stepless feed 6-18 m/min, star-delta switch, mechanical table height adjustment via hand lever, drive via cutterblock, fine adjustment by handwheel, mechanical digital display for planing height, 1x table roller, extraction connection 160 mm, 1x steel infeed roller, 1x steel outfeed roller. Ffodpsxdl U Ejfx Afnsu

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW Fedpjuz Hmxjfx Afnofu - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: used, Year of construction: 1979, functionality: fully functional, working height: 2,400 mm, working width: 3,500 mm, power: 1.5 kW (2.04 HP), 3 vertical, 2 lateral pressure cylinders Fodew Hlt Nopfx Afnjfu Condition: function tested, very good, used

Condition: new, Year of construction: 2024, Manual band saw machine for cuts from 0° to 60° right. Hydraulic belt tension, loop handle with control button. Combination belt guide with lateral bearings. Carbide cutting tips and an upper bearing. Manual pruning or pruning option without the user, with the weight of the bracket and controlled by hydraulic brakes; then the bracket is raised again manually to the desired position. Manual clamp for quick and precise blocking of the part. Rotation of the bracket from 0° to 60° to the right with locks, precise measurement of the angle, manual vice with quick-release lever. Millimetric degree scale rod. Coolant tank integrated on the upper side of the base frame with a discharge nozzle and electric coolant pump for cooling on both sides of the saw blade guides. Control voltage 24 VAC, main switch and control. Maximum current protection and short circuit. Connection voltage: 400V/50Hz/3Ph standard. Machine colour: yellow RAL 1018 and gray RAL 7036. Fedpfx Afogculvsnofu It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.