Granulate dryer

Zweifel Aufsatztrockner

Condition: good (used), Year of construction: 1998, Battenfeld 600/200 CDC Unilog 4000 Closing force 60 tons Year of manufacture 1997 Gkedog Emvhopfx Aciob Screw diameter 30 mm Shot weight approximately 90 g

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Gkedpfxeh Nypfj Acijb

Condition: excellent (used), Year of construction: 2016, Clamping force (kN): 1600 Opening stroke (mm): 460 Mould height (min–max) (mm): 250 – 600 Platen size (mm): 760 × 760 Tie bar distance (mm): 520 × 520 Ejector stroke / force (mm / kN): 150 / 40 Dry cycle time (sec): 1.4 – 320 Injection unit 1: Screw diameter (mm): 30 Screw stroke (mm): 160 Shot volume (cm³): 113 Screw speed (rpm): 420 L/D ratio (3 zones): 23.6 / 20.0 Gkodpjyyz Ddjfx Acisb Plasticizing capacity (g/sec): 15 / 22 L/D ratio (barrel): -29 Plasticizing capacity (barrel) (g/sec): -29 Injection flow (cm³/sec): 157 / 214 Injection pressure (bar): 2400 / 2000 Nozzle stroke / force (mm / kN): 225 / 28 Injection unit 2: 30 mm Drive / Power Pump motor power (kW): 16.91 Working hours 13.227 h Type: Multicomponent Drive: Electric Possible to buy with Viper robot

Condition: used, Year of construction: 2017, operating hours: 21,000 h, clamping force: 100 kN, displacement volume: 46 cm³, injection pressure: 2,400 bar, overall weight: 4,500 kg, screw conveyor diameter: 22 mm, terms of delivery: FCA Pegnitz delivery time: on request Gksdpfx Acjzz Aw Sjisb terms of payment: 100% prior to delivery

Condition: excellent (used), functionality: fully functional, Manufacturer: ENGEL Type: e-motion 440-160 T Control: CC300 Year of manufacture: 2018 Operating hours: 33526 h Technical data, clamping side Clamping force: 1600 kN Tie bar distance h x v: 520 x 520 mm Platen size h x v: 760 x 760 mm Minimum mold height: 375 mm Maximum mold height: 600 mm Maximum platen distance: 1060 mm Opening stroke: 460 mm Ejector stroke: 150 mm Ejector force: 40 kN Centering of moving platen D: 160 mm Centering of fixed platen D: 160 mm Tool weight: 1250 kg Technical data, injection side Screw diameter: 40 mm Injection volume: 220 ccm Injection pressure: 1940 bar Screw length: 24 l/d Screw stroke: 175 mm Screw speed: 420 rpm Screw torque: 605 N Plasticizing rate: 33 g/s PS Free injection rate: 224 g/s PS Number of heating zones: 4 Nozzle stroke: 305 mm Dimensions & weight Machine dimensions L x W x H: 6.75m x 2m x 2.42m Total weight: 8500 KG Equipment • Screen text, German • Screen text, English • CEE socket, 32A • Hydraulic core pull, 2x • Hydraulic core pull unit • Air valve, 1x • Machine with water manifold • Machine without material hopper • Machine without material conveying system • Needle-valve nozzle, pneumatically actuated Gkjdezyn Tpspfx Acisb • Leveling elements • Interface EUROMAP 63 • Interface EUROMAP 67 Handling • Interface for ejector plate locking • Schuko socket, 10A

Condition: excellent (used), Storage location number: Manufacturer: KOCH Year of manufacture: 2014 Type: CKT 300 Equipment number: 4634 Temperature range: up to 150°C Pressure: bar Granulate container: 1 x 60 liters, 1 x 100 liters, 2 x 150 liters, Distribution station Control system for drying Control system for distribution Equipment: stationary Gedpfx Aszqy Exsciekb Note: like new condition Connection: 30 kW

Year of construction: 2005, condition: used, Max. locking force: 3500kN, clear tie-bar spacing: 710x710mm, min. mold height: 380mm, max. opening stroke: 1300mm minus mold height, max. ejector stroke: 250mm, max. ejector force: 95kN, ejector retraction force: 48kN, rotary table diameter: 890mm, screw diameter K1: 60mm, K2: 35mm, nozzle radius: 15mm, max. injection pressure K1: 2000bar, K2: 2429bar, max. shot weight (PS) K1: 618g, K2: 142g, hot runner: external, core pull connection: DNP Flatface BG3 (large flat-face sealing), centering mandrel: AS + DS, weight: 16.37t, total operating hours: 74,276h, production hours: 66,341h, the second injection unit and the rotary table have not been used for five years, with documentation and linear handling system, regularly maintained in-house. An on-site inspection is possible, the machine is not connected to power. Gksdjzzqmnopfx Acijb

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 50 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 30 mm, clearance between the columns: 480 mm, displacement volume: 247 cm³, injection pressure: 272 bar, injection weight: 107 g, mold height (min.): 150 mm, ejector force: 40 N, ejector stroke: 100 mm, plate width: 705 mm, plate height: 705 mm, total length: 5,037 mm, total width: 1,590 mm, total height: 1,850 mm, overall weight: 5,400 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 62 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF120 IU320 D=30 Fully electric IMM. Ejector, nozzle system, core pulls servo-hydraulically controlled. Clamping force 120T Tie bar spacing 480x480 Tool installation height 150 to 580 Robot interfaces Euromap 18 and Euromap 67 Warranty can be optionally extended to 24 or 36 months. Suitable 12 kg linear robot available upon request. Optional equipment: CE Maximum tool height increased to 580 mm Bimetallic plasticizing up to GF 30% Interface for conveyor belt Electric quick-change system for the cylinder with Harting interface 2 additional hydraulic core pulls with limit switches 2 air blow devices, permanently mounted on the stationary platen Dosing signal interface with HAN-3A connector Additional power supply: 220 V, 10 A, Schuko socket 20-mA interface for mold temperature controller One water distributor 4 × 2 on the rear of each platen with 3/8" connections 2 water distributor batteries with 4 lines each Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket Gsdpjzzn Hlsfx Aciekb 3 freely programmable input/output signals Centering rings on both platens according to Euromap 18 / 67 Standard equipment: Clamping unit · Clamping unit with automatic central lubrication · Clamping movements via proportional valve control · Hydraulically operated ejector plate · Tool protection · Variable adjustment of the clamping force possible · Ejector protection · Mechanical robot interface Euromap 18 · Footboard protection under the clamping unit from D1 1100 and larger · Precision leveling shims between machine frame and customer floor · Platens with threaded holes and T-slots, see technical data · Automatic central lubrication (with grease) · Ejector plate Injection unit · Hydraulic dual-cylinder injection · Thermally insulated plasticizing unit · 10-stage adjustment of the injection speed · (Control parameters: speed; pressure; position) · 10-stage adjustment of the holding force (Control parameters: speed; pressure; position) · 5-stage adjustment of the plasticizing speed · (Control parameters: speed; pressure; position) · Plasticization supported on linear guides · Hydraulic nozzle system · Cold start protection · Screw retraction function · Automatic shut-off · Measuring system for screw position Electrical system · Plasticizing heater via PID control · Manual, semi-automatic and fully automatic operation possible · Maintenance interface · Automatic alarm system with horn · Unlimited technical parameter memory · Automatic tool height adjustment · Emergency stop function · Online cycle analysis · 12" TFT touch operating panel · Visualized graphic program · PDP interface · Injection monitoring · Tool closing monitoring · SPC interface · IP54 standard · Screw speed measurement · 16-level password security · Euromap 12 · Automatic overheating protection Hydraulic system · Quiet servomotor hydraulic system · Energy-saving servomotor hydraulic system · High-performance servopump system · Back pressure control via proportional valves · Oil preheating · Injection and tool closing monitoring · Automatic pressure and flow calibration · Oil temperature and oil level alarm

Condition: excellent (used), Year of construction: 2007, Battenfeld HM 300/2250S with robot Wittmann W818 / machine in very good technical condition / operating hours: approx. 40.000 h in automatic mode year of construction: 2007 injection unit: screw diameter: 55 mm injection weight: 702.5 g Injection pressure: 2500 bar Metering volume: 772 ccm Gkodpfxozy Ikhj Aciob Clamping unit: Clamping force: 300 t tie bar distance: 710x630 mm size of clamping platens: 1030x1020 mm ejector: hydraulic clamping unit: hydraulic Control: UNILOG B6 - touch control panel Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners x 8 Injection unit is wear resistant and resistant to corrosion Proportional valve on the injection unit - precise injection In the machine is installed new original screw and cylinder Robot Wittmann W818 4-axis, high-speed robot: 3 axes are driven by servo motors (electric); movement A and C Touch control panel Robot with adapter, protective housing Dimensions: Weight: 13000 kg Length/width/height: 6.90x1.90x2.40 m Drive: Pumps/motor: 45 kW Heating power: 22,7 kW Total power: 67,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Cutting mill for high loads (heavy duty) Godpezy Hkmjfx Aciekb Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator knives Drive motor 75 kw