Zoller smile 400

Zoller smile 400

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Type VSM400-00170 Voltage 230 V Tolerance -10% to +6% Frequency 50/60 Hz Guedpfxoywlx Ts Afcoa Power < 1000 VA Standard DIN EN 61010-1 Pneumatic pressure 4 - 6 bar Weight 900 N Year 2003

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 800 mm z-travel 800 mm control SIN840D spindle turning speed - stepless 5 - 10.000 U/min power capacity at 40 % load 38,00 KW power capacity at 100 % load 25,00 kW max. torque at 40% / 100% load 288 / 187 kW spindle taper HSK 100 feed X/Y/Z/-axis 0 - 60.000 mm/min rapid traverse X/Y/Z 60,00 m/min Gujdpfex Tiy Tjx Afcea feed capacity X/Y/Z 12,00 kN B - axis 180 x 0,001 ° rapid travel B-axis 10,00 U/min size of pallet 800 x 630 mm table load 0,80 t C-axis 360 x 0,001 ° rotary table speeds infinitely variable 1 - 800 U/min power capacity - table 13,85 kW max. torque on the faceplate 1.550 Nm toolpiece magazine: chain magazine 60 Stück tool diameter 110 mm wotkpiece diameter with 2 vacant positions 230 mm tool length - max. 450 mm weight of tools max. 30,00 kg total power requirement 80,00 kW weight of the machine ca. 18,00 t dimensions of the machine ca. 7,50 x 5,50 x H3,50 m 5-axis machining center with SIEMENS SIN840D coolant filer system 980l, chip conveyor, coolant through the spindle, extraction, BLUM tool measurement, measuring probe, operating mode 4, tool cone cleaning, hydraulic clamping with proportional valve.

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm Guodpfxohzbipo Afcsa - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: excellent (used), Year of construction: 2016, For sale: Prima Power BCe Smart 2220 (2016) panel bending machine. Main advantages: Servo-electric technology – up to 60% lower energy consumption and up to 70% lower maintenance costs High bending quality and precision Compact layout, operator-friendly design Semi-automatic operation, manual sheet loading/unloading Equipped with a safety system: laser scanners, light curtains Technical specifications: Max. bending length: 2250 mm Max. sheet length: 2850 mm Max. sheet width: 1500 mm Max. panel diagonal: 3000 mm Max. bending height: 204 mm Bending force: 32 t (320 kN) Pressing force: 52 t (510 kN) Processable steel thickness: up to 3.0 mm Minimum thickness: 0.5 mm Average power consumption: 4.0 kWh Additional equipment and features: Gedpfx Afsxfiw Tjcsua Software: Master BendCam 2D, Tulus HMI Tool library, visual simulation of the bending process Remote diagnostics, user-friendly control interface Lowerable work surfaces – convenient parts handling Year: 2016 Condition: Used, well-maintained, connected, can be seen in operation. If you have any further questions, we will be happy to answer them.

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Gusdsxdc Uvspfx Afcja

Condition: like new (used), Year of construction: 2012, 12 station, Siemens Sinumerik 840D control, load / unload, VAS air cleaning unit, (2012) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Gujdpfxev Igghs Afcja Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Year of construction: 2018, condition: ready for operation (used), A high-precision Takisawa CNC lathe with double spindles is available. Spindle power: 2x 7.5kW, speed: 5000rpm, spindle nose: F-80, tool holder: 2x 5 places, max. turning diameter: 50mm, max. turning length: 50mm, max. workpiece weight: 2x 0.5kg. Machine dimensions X/Y/Z: approx. 2600mm/2550mm/2150mm, weight: approx. 4300kg, control: 2x Fanuc Oi-TF, operating hours: 11179h. Including hinged belt conveyor to the rear, automatic central lubrication, machine cladding with coolant pump, portal loader type D, Raku Raku loader, turning station, automatic loading and unloading door per spindle and storage chute for test part. Documentation available. On-site inspection is possible. Gujdpfsu Dm Izex Afcoa

Year of construction: 2011, condition: ready for operation (used), Horizontal machining center with 5-axis Fanuc CNC, tilting table with 120° and continuous B-axis. Pallet magazine with 10 stations, automatic tool changer with 199 stations. Accessories included with the machine: Guodpfeku A A Hox Afcsa Chip conveyor, high pressure coolant system through the spindle line with separate tank and paper filter.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 3,300 h, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1050 mm Y-AXIS TRAVEL: 900 mm Z-AXIS TRAVEL: 1000 mm DISTANCE SPINDLE NOSE-TABLE: 100 - 1100 mm RAPID FEEDS X-Y-Z: 60 m/min SPINDLE: 10000 rpm; 25-45 kW; 600 Nm; ISO 50 - BT PALLET: N.2 ; CONTINUOUS ; 630x630 mm MAX ADMITTED LOAD: 1500 Kg MAX MACHINABLE PIECE DIMENSIONS: ø1050 x 1350 mm TOOL MAGAZINE: CHAIN-TYPE ; 90 POS CONTROL UNIT: FANUC 31i WEIGHT: 18000 Kg OVERALL DIMENSIONS: 6520 x 3930 x 3495 mm Guedpfxexvfuvo Afcea ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT50 - Spindle power : 40 [kW] - Spindle speeds : 12000 [rpm] - Gearbox - Speed ranges : 2 LINEAR AXES - Travels on X/Y/Z axes : 2400/1650/1750 [mm] - Rapid traverses rates (X/Y/Z) : 42 [m/min] - Cutting feed rates (X/Y/Z) : 20 [m/min] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 116 - Tool exchange time : 3.8 [sec] PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 1600 x 1250 [mm] - Pallets number : 2 - Maximum weight upon pallet : 5000 [kg] - Distance table center / spindle nose (min./max.) : 100 - 1750 [mm] - Maximum workpiece diameter : 2500 [mm] - Maximum workpiece height : 1850 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 86 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 9.485 x 6.155 [mm] - Machine height : 4.370 [mm] - Machine weight : 50000 [kg] MACHINE HOURS - Number of working hours : 15446 [h] EQUIPMENT - CNC : Fanuc 31i-model B5 Interface : Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic handwheel - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 70 [bars] * Coolant through spindle * with paper filtering unit * with cooling unit for coolant * With washing gun * With cabin washing - Chips conveyor - Spindle cooling unit - Tool probe - Workpiece probe : Renishaw RMP60 - Tool breakage detection : SOFT AC - Pallets number : 2 - Milling vice Gedpfow Ephbex Afcoua - Tool-holders