ZF Duoplan 2K300 two-speed gearbox

ZF Friedrichshafen AG ZF Duoplan 2K300 Zweigang-Schaltge.

Condition: excellent (used), Brand: DMTG DALIAN Model: CKE 6180 Z Cnc : FAGOR 8055 iT Dwsdpfxou U Htco Aa Iec Turning diameter : 800 mm Turning length: 2.000 mm Center height over bed: 400 mm Face slide travel: 420 mm Longitudinal travel : 1.835 mm Spindle bore: 100 mm Spindle speeds: 40-1000 rpm Feed in X : 0-4000 m/min Feed range Z direction : 0-8000 m/ min Turret : 4 estaciones Chuck diameter 4 jaw: 400 mm Quill stroke: 260 mm Voltage : 400 v Total power requirement: 18,5 kw Machine dimensions : 4.500 x 2.000 x 1.800 mm

Condition: excellent (used), Year of construction: 2000, turning length: 2,000 mm, spindle bore: 105 mm, spindle motor power: 21,000 W, total height: 2,100 mm, total length: 4,500 mm, total width: 2,000 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, turning diameter over bed slide: 620 mm, workpiece weight (max.): 2,500 kg, overall weight: 7,800 kg, Very little hours Hydraulic tailstock CE Safety doors Multi Fix Tool holders system  D1 Chip conveyor Swing over bed Ø: 620mm Swing over cross slide Ø:370mm DBC Turning Length: 2000mm Spindle bore: 105mm Dwjdeyuchrjpfx Aa Iec Spindle power: 21kW Tailstock spindle Ø: 100Ø Stroke pinole: 200mm Spindle taper: 6Mk Workpiece weight: 2500 Speeds / ranges: 1600Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Length: 4500mm Width: 2000mm Height: 2100mm Weight: 7800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1999, condition: good (used), used moving column bed milling machine > make Kekeisen > type 1200/8 > year99 > With Heidenhain TNC 426 > > Spindle mounting SK40 > With 30-fold tool changer > Speed 20-7300 rpm > Rapid traverse 0-30 m/min > travels > X 1200 mm > Y 500 mm > Z 800 mm > Milling head automatically swivels in vertical > and horizontal position Dedpfjm Twc Tsx Aa Iswc > Drive power 28 kw > Weight 12 to

Condition: like new (used), Year of construction: 1997, Retrofitted: 2025 Numerical control: HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 4500 x 1100 mmNumber of T slots: 8T slots dimensions: 22 mm Dsdpfxeyw Uqxo Aa Iswc   Traverses of axis Longitudinal traverse X: 4000 mmCross traverse Y: 1200Vertical traverse Z: 1000 Milling head Head type: New Universal Auto-indexing (UDG / every 2.5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)  /  Pull stud: DIN 69872Speed range: 20 - 3000 rpmSpindle power: 29,8 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 /  10000 mm/min Weight and dimensions Maximum weight on table: 8000 kgMachine weight approximate: 23500 kgMachine dimensions approximate: 11100 x 5392 x 3400 mm Accessories Guarding: 2 front doors and a new perimetral wire-mesh fence.Electronic handwheel: New HR-510Coolant: External Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: used, Technical details: Tool holder shaft type: HSK-A 100 Tool holder shaft type: Wohlhaupter Tool holder shaft type: Feindrehwerkzeuge Ausdrehkopf / Precision Turning Big selection of Wohlhaupter HSK-A 100 Tool holders / precision turning tools / adapters /extenders etc. for sale Sales list with prices upon request. Dsdpfoyug Ebex Aa Iewc *

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 690 x 700 mm -T grooves: 5 pieces 28 mm -Number: 1x table available -Dimensions: 690/700/H693 mm -Weight: 360kg Dwedpfx Aaegh Ixte Isc

Condition: good (used), Year of construction: 1981, functionality: fully functional, conveyor belt length: 6,100 mm, conveyor belt width: 600 mm, conveyor belt speed: 100 mm/s, total length: 6,100 mm, total width: 740 mm, total height: 340 mm, power: 0.25 kW (0.34 HP), input frequency: 50 Hz, Type: Conveyor belt TAF article number: 1000003874 Manufacturer: SPÄTH Year of construction: 1981 Overall dimensions: 6,100 x 740 x 340 mm (LxWxH) Width incl. side panel: 710 mm Cheek height: 100 mm Width incl. drive: 740 mm Conveyor length: 6,100 mm Conveyor width: 600 mm Belt type: PVC, smooth Belt width: 600 mm Substructure: excl. drive Drive: Centre station Motor: Gear motor Motor data: ATB, 0.25 kw, 50 Hz, 400-230 Volt Conveying speed: 0.03 - 0.1 m/s, adjustable Special features: Speed controller, CEE plug, ON/OFF switch Dsdpfx Ajtphc Roa Iewc Condition: Used / fully functional Function test: OK

Condition: used, Year of construction: 2001, Lippert belt conveyor inclined belt GF 7000-650-500 RA1480 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 7000 mm (upper straight 1000mm + arch 500mm + inclined belt 5500mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope / Slope: adjustable Optionally available: Supports Side guide one and both sides Dodpfxsk Abcks Aa Ijwc Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck -Handover in its current condition as inspected -Thread cutting chuck without collets -with slip clutch -Cutting capacity: M24-M64 -Recording: MK5 Dsdjc S D H Ijpfx Aa Iewc -Quantity: 1x threading chuck available -Weight: 13 kg

Condition: used, Year of construction: 2001, Lippert belt conveyor ascending conveyor GF 6960-650-500 RA1459 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6960 mm (ascending conveyor) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Dwsdek Abbfopfx Aa Isc Slope / Slope: adjustable Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics