Fixed bed milling machine

Zayer KF3000

Condition: good (used), Year of construction: 1990, For sale: Zayer KF 3000 CNC milling machine. This is a large-capacity, fixed-table machine designed for machining heavy parts. Technical specifications (typical Heidenheim model): Dimensions and mechanical capacities: - Table length: approx. 3000 mm - Table width: approx. 1000 mm - Maximum table load: approx. 10,000 kg - X-axis travel (longitudinal): approx. 2700 mm - Y-axis travel (transversal): approx. 1250 mm - Z-axis travel (vertical): approx. 1000 mm (up to 1500 mm depending on version) - Machine weight: approx. 22,000 – 30,000 kg Spindle and power: Bsdpfxszlrlto Afmelk - Spindle speed: up to approx. 3000 rpm - Spindle motor power: approx. 30 – 37 kW - Spindle taper: ISO 50 Numerical control: - CNC: Typically Heidenheim TNC

Condition: excellent (used), Year of construction: 2007, turning length: 535 mm, spindle bore: 65 mm, travel distance X-axis: 225 mm, travel distance Z-axis: 535 mm, spindle motor power: 26,000 W, total height: 1,900 mm, total length: 2,900 mm, total width: 2,300 mm, overall weight: 4,380 kg, CNC Lathe MAZAK - QTN 200-II MACH-ID 9481 Make: MAZAK Type: QTN 200-II Control: Mazatrol Matrix Nexus Year: 2007 Max. turning Ø:610mm X-Axis: 225mm Z-Axis: 535mm Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 26kW ATC / revolver:12 Chip conveyor: Yes Tool eye: Yes Hours: 5049H Length: 2900mm Blsdsyyxh Topfx Afmsk Width: 2300mm Height: 1900mm Weight: 4380kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), workpiece diameter 10 - 250 mm threading length 900 mm thread pitch 0,3 - 100 mm spindle turning speed range 72 / 1700 - 2540 U/min relief of the tap 0,03 - 8 mm clamping length max. 1190 mm max. module 10 workpiece turning speeds 0,4 - 160 U/min total power requirement 13 kW weight of the machine ca. 7,4 t dimensions of the machine ca. 4,5 x 2,0 x 2,1 m Many accessories. Bjdpfxsyb S Rio Afmelk

Condition: used, Year of construction: 1998, operating hours: 8,700 h, functionality: fully functional, The used DAEWOO Lynx 200B 2-axis CNC lathe is a robust and fast numerically controlled lathe with a slant bed and flat guides, compact in size. It is equipped with a FANUC 21-T CNC control unit with LCD monitor, year of manufacture 1998, and complies with CE standards. Main features: Max. swing over bed: 460 mm Max. turning diameter: 280 mm Max. turning length: 500 mm Max. bar capacity: 51 mm Spindle nose: ASA 6” Spindle: max. rotation speed 4,500 rpm Spindle motor power: 11 kW Turret: 10 positions Turning/boring tool size: 25×25 mm / Ø40 mm Tailstock: quill diameter 65 mm, quill stroke 80 mm – MT4 Machine weight: 3,500 kg Bjdox Nqliopfx Afmelk The equipment includes the tailstock with programmable quill, tool presetting system, 3-jaw hydraulic chuck (which will be supplied in place of the manual chuck), and operating and maintenance manuals.

Condition: used, TECHNICAL DETAILS - maxi module to be cut : 1.5 [mm] - maxi diameter to be cut: 70 [mm] - maxi length to be cut: 100 [mm] - part maxi length: 200 [mm] - number of tooth mini to be cut: 3 Bljdpouhbpljfx Afmek - number of endless screw threads (special accessories): 1 - helix angle: 0-90[°] - milling tool maxi diameter: 50 [mm] - 11 milling tool normal speeds - speed normal machine: 226 – 2100 [rpm] - power: 1.5 [kW] - net weight: 1035 [kg]. EQUIPMENT - with part loader

Condition: used, Radial drilling machine CSEPEL, Type RFh 75 / 1500 Machine no. 13704, Year of manufacture 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle mount: MK 5 Nominal overhang: 1500 mm Maximum overhang of the spindle: 1500 mm (to the column) Minimum overhang of the spindle: 440 mm (to the column) Distance from spindle nose to clamping surface: 370 - 1700 mm Overarm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed rate: 0.047-2 mm/rev, 12 steps Bledpfolhwr Rox Afmek Motor power: 11 kW Mains connection: 380 Volts, 50 Hz, 15 kW - Right-hand and left-hand rotation of the drilling spindle via hand lever switch - Hydraulic gear change for spindle speed and feed rate - Hydro-mechanical central clamping device - Motorized overarm vertical adjustment - Without coolant system - Machine light - Operating manual Space required: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons Good condition

Condition: excellent (used), With DRO With internal grinding attachement Center height 240 mm Distance between centers 2500 mm Grinding wheel 700 x 200 x 305 Grinding wheel speeds 890 / 1'120 rpm Workpiece spindle head 90° rotation Taper in tailstock MK5 Misc. accessories Blsdpozhmfyefx Afmok MARCELS MASCHINEN AG

Condition: like new (used), DN Solutions PUMA DNT2600L 2024 Model – Only 32 Cutting Hours (Like New Condition) Chuck: 12 inch Max Turning Diameter: 460 mm Max Turning Length: 1078 mm Spindle Bore: 81 mm Spindle Speed: 3,500 rpm Main Motor Power: 26 kW Blodpfx Afjy D E Rismok Max Torque: 735 Nm X-Axis Travel: 260 mm Z-Axis Travel: 1100 mm Rapid Traverse: X 24 m/min – Z 30 m/min Turret: 12 Stations Guideway System: Box Guideway Machine Weight: 4,900 kg Condition: 2024 model, only 32 cutting hours, almost in brand-new condition.

Condition: used, functionality: fully functional, power: 231 kW (314.07 HP), Year of construction: 2004, machine/vehicle number: KMTODO61E02076058, fully functional Blsdjylyp Ujpfx Afmek

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Year of manufacture: 1970 Blsdpfoxln Iwjx Afmok Max. workpiece diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Max. helical angle: 45 degrees Hob diameter: 500 mm Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available.