TP-PLUS-1:90+TP-Direct:120TP-Direct:120

Wittmann

Condition: used, Year of construction: 2018, The equipment can be inspected and tested, sold without a control panel. Dedpfxoyhchlj Afnsun

Condition: used, Year of construction: 2000, table length 1160 mm table width 710 mm daylight 650 mm Control WENZEL ME 5007 total power requirement kW Dodpjt Hw S Iefx Afnsun weight of the machine ca. 800 kg dimensions of the machine ca. m 3-D-coordinate measuring machine with METROLOG II-Software

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, The equipment can be inspected and tested. Dusdpfjyhccvsx Afnen

Condition: defective spare-parts repository (used), Year of construction: 2018, The equipment is operational, but the measuring and mixing bowl and the control panel are missing. Dujdpeyhca Ijfx Afnen

Condition: used, Year of construction: 2005, operating hours: 70,000 h, functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, Offer-Details: Stock-No. 14171 Manufacturer Engel Type of machine ES 2050 - 400 HL Year 2005 Working hours 70000 Controlversion CC200 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 4000 kN Size of mould platens (h x v) 1400 x 1080 mm Mould height min 350 mm Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Ejector force 83 kN Injection unit: Screw diameter 70 mm Injection pressure 1482 bar Stroke volume 1155 ccm Shot weight (PS) 1040 gr. Injection rate 419 ccm/s Screw speed 183 1/min Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Dimensions and weights: Dimensions of the machine ca. 8,30 x 2,35 x 2,48 m Total machine weight 31200 kg Accessories: - Anti vibration pads - 2 x 24 zones water flower - Material hopper - degassing screw Additional Options: - Robot interface Dodpfx Aou Awalofnjun - 4 x hydraulic core pulls

Condition: defective spare-parts repository (used), Year of construction: 2017, The equipment is incomplete and is being sold for parts. Dusdpeyhb Uqsfx Afnen

Condition: used, Year of construction: 2017, The device works, but the control panel is not included!! Can be tested!! Duedpfx Afsyhb Ukjnsn

Condition: excellent (used), Year of construction: 2010, operating hours: 75,000 h, functionality: fully functional, 55 kW compressor with built-in dryer and frequency inverter. Very good condition. After service. 3 months warranty. Dedpfx Aev Rmmmjfneun

Condition: defective spare-parts repository (used), Year of construction: 2015, The equipment is incomplete and is being sold for parts. Dedpfeyhb S Njx Afnjun

Condition: used, Year of construction: 2006, A Demag Ergotech injection molding machine including Wittmann robot and machine housing is available. 1) Injection molding machine Demag Ergotech 50/355-200, year of construction: 2006, tie bar distance X/Y: 355mm/355mm, min. installation height: 210mm, max. platen distance: 610mm, screw diameter: 25mm, injection weight: 55g, injection pressure: 2752bar, clamping force: 500kN, core pull: 1, weight: approx. 3100kg, control: CDIAS. 2) Handling robot Wittmann W721, year of manufacture: 2006, stroke X/Y/Z: -550mm/-1200mm/-2000mm, weight: approx. 250kg. 3) Cage. Documentation available. On-site inspection is possible. Duodpfx Aewvadnsfnen

Condition: used, Year of construction: 1993, pressure 160 t Duodpfxjtqm Dfs Afnjn throat 400 mm stroke 20 - 160 mm table surface area 1200 x 800 mm ram adjustment 100 mm no. of strokes 60 Hub/min ram surface 860 x 520 mm total power requirement 15 kW weight of the machine ca. 16 t dimensions of the machine ca. 1,7 x 2,5 x 3,23 m - Additional clamping plate - cross-grooved - Foot switch - Hydraulic clutch - Hydraulic ball screw clamp - Hydraulic overload protection - Flywheel brake - Hydraulic system with oil cooler

Year of construction: 2016, condition: ready for operation (used), Seven identical dosing units, including two suction stations (blowers) Wittmann, are available. 1) 7x plastic granulate dosing unit Wittmann Feedmax BS/6-315-50, year of manufacture: 2015, container volume: 15l, container diameter: 300mm, installation height: approx. 800mm, empty weight: approx. 15kg. 2) Blower Wittmann GS/6 05-XSB-50, year of manufacture: 2016, power: 2.2kW, vacuum line: DN50, negative pressure: 300mbar, conveying capacity: approx. 250kg/h, weight: approx. 92kg. Documentation available. An on-site inspection is possible. Dedoxxl Iuepfx Afnsun

Condition: excellent (used), Year of construction: 2014, operating hours: 56,851 h, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 25 mm, displacement volume: 86 cm³, injection pressure: 3,000 bar, mold height (min.): 200 mm, opening stroke: 450 mm, overall weight: 4,800 kg, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503665 manufacturer: Wittmann Battenfeld type: EcoPower 110-350 controller: UNILOG B6P year of construction: 2014 operation hours: 56851 h clamping force: 1100 kN distance between tie-bars h x v: 470 x 420 mm size of mould plates h x v: 680 x 663 mm min. mould height: 200 mm max. mould height: 450 mm max. open daylight: 830 mm opening stroke: 380 mm Djdpsygv Ntefx Afnoun screw diameter: 25 mm swept volume: 86 ccm injection pressure: 3000 bar equipment included screen text german Screentext Multi-Language CEE-socket 16A machine incl. water flow regulator Anti vibration mounts measures of machine l x w x h: 4.57m x 1.5m x 2.13m total weight: 4800KG

Condition: ready for operation (used), Year of construction: 2001, Travel X/Y/Z: 500mm/600mm/400mm, max. length measurement error: 2.9 + L/350, max. single-point error: 2.9, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Duodpfjw H Auqjx Afnjn

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Number of axis: 3 Reach: 1500 mm Payload: 6 kg X=420mm Y=1200mm Z=1500mm Dodpfxjyftw Es Afnjun EUROMAP 67