Four Side Planer

WEINIG UNIMAT 23E 10/25

Condition: excellent (used), mileage: 495,000 km, power: 537 kW (730.12 HP), fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 8x4, fuel: diesel, fuel tank capacity: 1,000 l, brakes: retarder, color: blue, driver cabin: sleeper cab, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 13,000 kg, Equipment: AdBlue, air conditioning, cruise control, retarder, second fuel tank, spoiler, = Additional Options and Accessories = - Leaf spring suspension - Roof spoiler - Refrigerator - Air suspension - Radio/CD player - Sleeper cab - Sun visor Hodpsuu Ha Defx Akijw - Power take-off (PTO) = Notes = Color: Blue Details Manufacturer: Scania Type: R 730 8x4 Chassis number: YS2R8X40005472379 Year: 2017 Mileage: approx. 495,000 km Engine: 730 HP / EURO 6 / 16-liter diesel / V8 Transmission: Scania Retarder R4100 Front axle: 8,000 kg | 385/65 R 22.5 | leaf suspension Second axle: 8,400 kg | 385/65 R 22.5 | air suspension Rear axles: 13,000 kg | 315/80 R 22.5 | air suspension | hub reduction GVW: 26,000 kg GCW: 160,000 kg Equipment 500L + 500L fuel tanks AdBlue NATO / 24-volt electrical system Warning flashing lights on roof Alcoa rims Tool box PTO with 170L tank JOST JSK38C 3.5" fifth wheel on sliding frame Webasto Cabin Multi-functional steering wheel Cruise control Sun visor 2 x Bed Refrigerator Comfortable seats Storage boxes Radio CD player / AUX / USB Tachograph Roof hatch = Further Information = General Information Year of construction: 2017 Year of manufacture: 2017 Technical Information Number of cylinders: 8 Engine displacement: 16,000 cc Payload: 160,000 kg Permissible total weight: 42,000 kg Transmission Transmission: Scania Retarder R4100 Axle Configuration Front axle: Tire size: 385/65 R 22.5; Alloy rims; Max. axle load: 8,000 kg; Steerable; Suspension: Leaf spring suspension Mid-axle: Tire size: 385/65 R 22.5; Alloy rims; Lift axle; Max. axle load: 8,000 kg; Suspension: Air suspension Rear axle 1: Tire size: 315/80 R 22.5; Twin tires; Alloy rims; Max. axle load: 13,000 kg; Reduction: External planetary axles; Suspension: Air suspension Rear axle 2: Tire size: 315/80 R 22.5; Twin tires; Alloy rims; Max. axle load: 13,000 kg; Reduction: External planetary axles; Suspension: Air suspension Functional Body manufacturer: Scania Condition Technical condition: very good Optical condition: very good Damage: none Financial Information Price: On request

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° Hedpfx Aeh Nvyzjkiew -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 5 mm to 300 mm Hsdpsupy Spsfx Akiow Minimum workpiece length: 250 mm Units: 2 1. Saw cutting unit Random System: Saw cut appearance 2. Brush: Tynex, diameter 210 mm Height adjustment: electric Height display: digital Feed speed: 4 - 14 m/min Motor power saw unit: 1.1 kW Motor power brush: 4 kW Motor power feed: 0.37 kW Machine length: 1400 mm Machine width: 1500 mm Machine height: 1600 mm Weight: 700 kg

Condition: new, Year of construction: 2022, Diameters 40-140mm Hodsdprvuspfx Akiow Engine 2.2kW Price per 1 piece

Condition: excellent (used), Weinig Unimat 23 EL four-sided planer Working width 230mm Working height 160mm Head arrangement: Bottom 5.5kw Right 4kw Hsdorb An Uepfx Akijw Left 5.5kw Right 4kw Top 11kw Bottom 5.5kw Top 7.5kw Bottom 7.5kw Feed speed adjustable on variator 6-36m/min Feed driven by cardan shaft Rollers driven in table Pneumatic pressure pads CE certificate Year of production 2003

Condition: new, Year of construction: 2026, Size: 5 Nominal heat output: 145 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber completely lined with fireclay bricks For rooms of: 3,800 m³ (according to DIN) Fuel: logs, chipboard, wood chips, chip briquettes Fuel consumption: 35 - 40 kg/h Forced air output: 9,400 m³/h Exhaust outlet: Ø 700 mm Flue gas connection: Ø 220 mm Weight: 1,950 kg PLC control cabinet: 380 volts Hsdsdlhcropfx Akiow

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with Hjdexz Hh Uepfx Akiow depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: ready for operation (used), functionality: fully functional, Cutter shaft speed: 30,000 + 4,000 rpm Milling spindle height adjustment range: 135 mm Maximum milling tool diameter: 390 mm Maximum tool clamping height: 225 mm Spindle diameter: 40 mm Milling motor: 5.5 kW Cross-cut saw speed: 3,000 rpm Hsdsyync Tjpfx Akijw Cross-cut saw height adjustment: 190 mm Max. cutting height of cross-cut saw: 100 mm Max. saw blade diameter: 350 mm Cross-cut saw motor: 0.75 kW Saw blade arbor: 30 mm Sliding table travel: 1270 mm Length stop range: 1750 mm Weight approx.: 740 kg

Condition: used, • Four-sided planer with a classic spindle • Working width up to 240 mm • Working height up to 120 mm • Min. Working height 6 mm • Spindle speed: 6000 rpm • Infinitely variable feed 5-25 m/min (optionally up to 36 m/min) • Long axial adjustment path on the vertical spindle, up to 80 mm • All tool spindles with independent motors Hedpfx Ajxxkt Aokijw

Condition: not inspected (used), Power connection 380V 5.5kW, right/left rotation, two electronically controlled speeds, spindle diameter 30 mm, spindle height adjustment via handwheel 180 mm, spindle not tiltable, 6 speeds: 3000/4000/5000/6000/8000/10000 rpm, dimensions (W x D x H): 1200 x 1200 x 1100 mm, weight approx. 1000 kg, complete with tenoning device / sliding table Hsdoxqp Ngopfx Akijw