Knife setting device

WEINIG

Condition: used, Second-hand Rondamat adapter used as a work surface for the projector. When making a stencil, the original blade is placed on the work surface and magnified using the projector, enabling the profile to be copied exactly. This is similar to the technology used in an overhead projector. Nwedpfs Af Syiox Akijn Technical data: - On request

Condition: good (used), Year of construction: 2004, I sell the semi-automatic finger joint line GreCon Profijoint PJ7/6100-LI. Year 2004. Input length 100-1.000mm Input width 40-150mm / 510mm in 1 step Input thickness 20-50mm Automatic finger joint unit with glue spraying 1 side Automatic turning of the material for the 2nd pass on turning table Automatic feeding to the press Press 3,00 - 6,10m with automatic cycle and end-cutting saw Njdsmig Tdspfx Akiswn Total area covered 10.50 x 3.50 m Strong construction. Very good condition. Available immediately.

Condition: used, Second-hand Weinig high-performance planer, model Hydromat 17BL, for professional woodworking. The machine has ten spindles and is suitable for industrial planing and profiling of timber. With a working width of 170 mm, a working height of 120 mm and a feed rate of 60 m/min, it is designed for high-performance continuous processing. Technical data: - Spindles: 10 - Spindle 1: Bottom / 7.5 kW / 50 mm - Spindle 2: Right / 7.5 kW / 50 mm - Spindle 3: Left / 7.5 kW / 50 mm - Spindle 4: Right / 7.5 kW / 50 mm Nsdez Da Dlepfx Akiswn - Spindle 5: Left / 7.5 kW / 50 mm - Spindle 6: Top / 11 kW / 50 mm - Spindle 7: Bottom / 7.5 kW / 50 mm - Spindle 8: Top / 7.5 kW / 50 mm - Spindle 9: Bottom / 7.5 kW / 50 mm - Spindle 10: Universal / 7.5 kW / 50 mm - Working width: 170 mm - Working height: 120 mm - Feed rate: 60 m/min - Feed motor: 15 kW - Table: Hard-chromed

Condition: excellent (used), CATALOGUE NUMBER 7890 Technical specifications: - track width 245mm - shaft width for the edger 380mm - shaft width for the multi-blade saw 320mm - max. blade diameter 350mm - blade arbor diameter for the edger 80mm - blade arbor diameter for the multi-blade saw 65mm - max. cutting height 120mm - table width with clearance 900mm - table length 1780mm – from above: - feed rollers/ejectors - smooth pressure shaft - feed rollers - smooth pressure shaft - insert for short pieces - shaft with saws - 2 smooth pressure shafts Nwjdpfj Af Ivujx Akijn – from below: - guide - feed rollers/ejectors - track - central lubrication - laser - stepless feed speed adjustment - feed motor 1.1kW - main motor 30kW - manual lifting of the machine body - manual lifting of the saw shaft - dust extraction nozzle diameter 210mm - overall dimensions L/W/H 1900x1500x1800mm - weight approx. 2000kg ADVANTAGES - German production - stepless feed speed adjustment - floating blade shaft for edging - multi-blade saw sleeve included - laser - insert for short pieces - multi-blade saw, used, very good condition Net price: 55900 PLN Net price: 13000 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: new, range L-W-H 1700 x 485 x 950 mm weight 116 kg 6 St. Internal dimensions of the top drawer 1390 x 360 x 60 mm. Internal dimensions of the right second la 910 x 380 x 90 cm. Internal dimensions of the left 2nd, 3rd and 4th la 440 x 380 x 90 mm. Internal dimensions of the left fifth la 440 x 380 x 210 mm. Internal dimensions of the shelf behind the doors 940 x 450 x 390 mm. Wheel dimensions 150 x 40 mm. Njdju Imfujpfx Akiown The thickness of the solid wood panel 40 mm. Packaging dimensions 153 x 49 x 96 cm. Weight 116kg.

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 88.961, functionality: fully functional, planing width: 230 mm, spindle diameter: 40 mm, number of spindles: 10, planing height: 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 10 1st planing axis: 260 mm Spindle 1 Position: Bottom Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 2 Position: Right Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 3 Position: Left Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 4 Position: Right Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 5 Position: Top Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 6 Position: Bottom Spindle diameter: 40 mm Nwsdpfj Af Hgvsx Akisn Planing shaft speed: 8,000 rpm Spindle 7 Position: Top Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 8 Position: Bottom Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 9 Position: Top Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 10 Position: Top Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Planing width: min. 10 mm Planing width: max. 230 mm Planing height: max. 120 mm Infeed table length: 1,975 mm Diameter of feed rollers: 140 mm Conveyor motor power: 5.5 kW Conveyor drive: Cardan drive Feed speed: min. 4 m/min Feed speed: max. 24 m/min Feed speed control: Stepless MACHINE DETAILS Diameter of extraction nozzle: 140 mm Lubrication system: Manual Voltage: 380 V Current consumption: 189 A Fuse rating: 200 A Power: 80 kW Dimensions & Weight Dimensions (L x W x H): 7,100 x 2,100 x 2,200 mm Weight: 6,000 kg Number of transport packages: 1 EQUIPMENT Documentation CE marking

Condition: used, Year of construction: 2007, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 11 NC window production system with an extensive set of tooling ----- INCLUDES: - Weinig Univar 6 rebating/profiling machine - Tooling for both the Unicontrol 11 and Univar 6 The machines can be viewed in operation until the end of calendar week 46, 2026. Dismantling and loading must take place during calendar week 47, 2026. (Note: If the buyer is unable to collect the equipment during week 47, temporary storage at our facility can be arranged.) OPTIONAL (for an additional charge): Professional dismantling and loading of the machines onto the customer's trucks: 4,500.00 EUR Manufacturer's technical specifications: ----- Item 1: Weinig Unicontrol 11 window production system (built 2007) ----- Includes existing tooling for: - IV 67 (timber and timber-aluminum) - IV 77 (timber and timber-aluminum) - IV 90 (timber) Cross-cut saw: ----- Equipped with a laser alignment light; motor power 3 kW; spindle diameter 40 mm; spindle speed electronically adjustable (3,000–6,000 rpm) with integrated brake. Maximum tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, with 8 positions for top-side edge rounding Horizontal rounding unit (bottom): ----- Motor with brake: 1.5 kW, spindle diameter 20 mm, clamping length 25 mm, rotational speed 9,000 rpm Maximum tool cutting circle: 130 mm Axial adjustment: mechanically coupled to the cross-cut saw Radial adjustment: pneumatically controlled Tenoning and slotting spindle: ----- Includes hydraulically clamped outboard bearing Motor power (with brake): 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Maximum tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment: via NC axis Base position (below table): 5–10 mm Radial adjustment: fixed 1st profiling spindle (climb and conventional milling): ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Nwjdpo Afzv Sefx Akion Tool cutting circle: min. 140 mm, max. 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment: 350 mm via NC axis Radial adjustment: via NC axis Base position (below table): 5–10 mm 2 feed rollers opposite the spindle; axial position pneumatically controlled (8 positions) Horizontal profiling unit (top): ----- Motor power (with brake): 3.7 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed 9,000 rpm Maximum tool cutting circle: 130 mm Pneumatic adjustment to 8 positions (axial and radial) 2nd Profile Spindle: ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: min. 140 mm, max. 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment range: 350 mm (NC-controlled axis) Radial adjustment range: NC-controlled axis Base position (below table): 5–10 mm Cyclic guide fence with support rail for muntins/ba...

Condition: ready for operation (used), 4 telescopic drawers, size: 450 x 600 mm Height-adjustable drawers, currently for filling heights: 100, 120, 250 and 320 mm Nsdpjixzzrofx Akijwn Required space: 720 x 550/750 x 1170 mm

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-30 m/min. control Powercom Weinig Powermat 500 (Window Version for window producers) 5 x PowerLock ----- The machine will be a partial renovated at our warehouse prior to delivery. The interior view photos of a similar machine from our archive serve to illustrate how the machine will be renovated. Technical Summary: ----- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4: CNC-controlled axial adjustment - Spindles 2, 3, 4, and 5: CNC-controlled radial adjustment - Window package for glazing bead separation: pneumatic cycling for right and top spindles for bead separation Detailed Description: ----- Tool arrangement no. 018 for window production Technical Data: Njdjzp Rxyspfx Akiewn ----- Working width: 20 – 230 mm (with tool cutting circle 93 – 125 mm) Working height: 8 – 120 mm (with tool cutting circle 93 – 125 mm) 1. Tool Spindle ----- First bottom spindle Diameter: 40 mm Motor with brake: 7.5 kW Speed: 8,000 rpm Tool cutting circle: 125 – 180 mm Tool cutting circle (rebate cutter): 130 – 160 mm Axial adjustment range: 17 mm Rebating device MarathonCoating for table insert before 1st bottom spindle 2. Tool Spindle POWERLOCK/HSK ----- First right spindle Motor with brake: 7.5 kW Speed: 8,000 rpm Includes high-performance ball bearings Tool cutting circle: 93 – 200 mm Maximum profiling depth: 35 mm Axial adjustment range (PowerLock): 55 mm Radial adjustment range: Min. tool diameter at fence level: 93 mm Max. tool cutting circle behind fence line 200 mm Right tool spindle: axial positioning (55 mm) pneumatically controlled via selector switch, max. saw blade diameter 180 mm CNC-controlled axial adjustment CNC-controlled radial adjustment 3rd tool spindle POWERLOCK/HSK ----- First left tool spindle Motor with brake 7.5 kW Speed ??8,000 rpm Includes high-performance ball bearings Tool cutting circle 93 – 200 mm Maximum profiling depth 35 mm Axial adjustment range for PowerLock 55 mm CNC-controlled axial adjustment CNC-controlled radial adjustment Pressure shoe in front of left tool spindle, incl. 2 spring-loaded lateral pressure rollers 4th tool spindle POWERLOCK/HSK ----- First top tool spindle Motor with brake 7.5 kW Speed ??8,000 rpm Includes high-performance ball bearings Tool cutting circle 93 – 200 mm Tool cutting circle for straight-knife cutterheads max. 163 mm Maximum profiling depth 35 mm Axial adjustment range 40 mm CNC-controlled axial adjustment CNC-controlled radial adjustment Top tool spindle: axial positioning (40 mm) pneumatically controlled via selector switch, max. saw blade diameter 180 mm 5th tool spindle POWERLOCK/HSK ----- Second top tool spindle Motor with brake 7.5 kW Speed ??8,000 rpm Includes high-performance ball bearings Tool cutting circle 93 – 2...

Condition: used, Second-hand 40 mm clamping mandrel for Weinig Rondamat 936, Rondamat 925 and Rondamat 934 grinders, or similar machines fitted with a workpiece holder. Nwodpfx Ake Afxlwoion Technical data: - Clamping length: 240 mm - Mandrel ⌀: 40 mm

Condition: good (used), Multi-spindle head, multi-spindle drilling head, drilling gearbox -Manufacturer: Perske, multi-spindle drill head with drive -Drill head: 18 spindles -Drill bit spacing: 32 mm -Stroke: 50 mm Nwsdovmw H Aopfx Akion -Drive: DSB 1306/2 1.8 kW 2800 rpm -Collets: Ø10 mm -Quantity: 2 pieces available Price: per piece -Overall dimensions: 800/200/H575 mm -Weight: 67 kg/unit

Condition: used, Second-hand planing head for back-toothed blades, Weinig Type 533, for professional use in woodworking. It is suitable for fitting RVZ blades and for precise planing work on timber workpieces. The robust steel construction is designed for use on compatible Weinig planing machines. Technical data: - Blade: RVZ Z2 - Cutting circle (ø): 122 mm - Bore: 40 mm - Marking: MEC - Length: 100 mm - Material: Steel Njdo Aft Hcjpfx Akiswn

Condition: used, Weinig Powermat 500 automatic planing and chamfering machine for four-sided planing and profiling of large timber (construction timber), featuring a memory function, electronic positioning and including a set of planing heads. AI-generated sample image; actual product may vary. Nwjdpfxs Afpfhj Akien Technical data: - Working width: 300 mm - Working height: 200 mm - Spindles: 5+1 - Spindle 1: Bottom / 11 kW / 40 mm / 8,000 rpm - Spindle 2: Right / 11 kW / PowerLock / 8,000 rpm - Spindle 3: Left / 11 kW / PowerLock / 8,000 rpm / CNC - Spindle 4: Top / 15 kW / PowerLock / 8,000 rpm / CNC - Spindle 5: Bottom / 11 kW / PowerLock / 8,000 rpm - Spindle 6: Chamfering unit / 1 kW / 10,600 rpm - Feed: 5–30 m/min // 4 kW

Condition: ready for operation (used), functionality: fully functional, AYEN push-rod drilling unit electro-pneumatic push-rod drilling unit various types Nedpfxeqv Ey Uj Akiown 2 units RPM 1C, 0.73 kW – €450 each 1 unit RPM 0.5C, 0.37 kW – €400

Condition: used, A second-hand clamping device for grinding stencils on the Rondamat 936, Rondamat 925 and Rondamat 934, or similar machines fitted with a workpiece holder. Technical data: - Contact diameter ⌀ (left): ~ 62 mm - Contact diameter ⌀ (right): ~ 30 mm Njdpfs Afnnusx Akiewn