Tool presetter

WEINIG Dimter Opticontrol

Condition: good (used), Year of construction: 1994, 2 side planer top - bottom constant table ( always same infeed height ) Kjdpfx Aehuthyoqgslt max. planing width 600 mm max. planing height 280 mm planing shafts with strip knives immediately ready for use

Condition: excellent (used), Year of construction: 2018, Weinig Powermat 700 Year of manufacture: 2018 Planing width: 230 mm Planing height: 160 mm Infeed table: 2,500 mm Feed speed: 40 m/min Feed motor: 7 kW Table treatment: Marathon coating (hardened, excluding infeed table and special plates) Driven roller in table with width 200 mm Memory Plus system for 500 profiles Kledpoyg Hflefx Aqget Spindle arrangement Bottom: 11 kW Right: 7.5 kW Left: 7.5 kW Top: 11 kW Top: 11 kW Bottom: 11 kW Machine is in very good condition

Condition: excellent (used), Weinig Profimat 23 Fortec four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Arrangement of spindles Bottom 7.5kw Klodeumxqrjpfx Aqgjt Right Left 11kw Top 7.5kw Top 5.5kw Bottom 5.5kw Pneumatic pressures Feed speed adjustable on variator Drive on cardan shafts CE certificate

Year of construction: 1995, condition: excellent (used), The line consists of the following components: 1) Weinig Profimat 23 milling machine 2) Band Feeder KOCH -T-100-B (250x4550) 3) Weinig Uniplan milling machine 4) Band Feeder KOCH T-100-B (250x7050) 5) Tenoning machine KOCH SF -3 5a) Bottom feeding belt for waste (at tenoning machine 300x6050) 5b) Side feeding belt for wastes (at tenoning machine 300x1800) Ksdpohm Exdsfx Aqgslt 6) Belt feeder KOCH T-100-B (250x5020) 7) Belt feeder KOCH T-100-A (300x3050) 8) Belt feeder KOCH T-100-B (300x3500) 9) Band feeder KOCH T-100-B (300x4530) 10) Weinig U2G milling machine 11) Feeding belt KOCH (250x4050) Line worked very few hours, is like new. Year of production machines included in the line is 1995. In addition, for each machine I add a set of Leitz cutters for the window with a profile of euro 68. The cost of a new line is currently more than 1 million euros.

Condition: reconditioned (used), Year of construction: 2004, AUTOMATIC WINDMILL PRESS WITH MECHANICAL LOCKING AND FEEDING AFTER A COMPLETE RENOVATION Klodpelnanwefx Aqget

Year of construction: 1984, condition: excellent (used), Blade diameter: 550 mm Kledpfx Aslrtntsqget Minimum cutting length: 500mm Minimum cutting width: 100mm Maximum cutting height: 160 mm Minimum cutting height: 40mm Pneumatic clamps

Condition: excellent (used), Chipper KLOCKNER HZM 1/400x100 with vibrochute Kedpsiwi H Rjfx Aqgelt – German production – year of production 1992 – six pulling rollers – autoreverse TECHNICAL PARAMETERS: inlet width 400 mm inlet height 100 mm engine power 30 kW sieve 50 x 60 mm feed motor power 2 x 4 kW vibrochute 4900 mm two knives rotor diameter 400 mm autoreverse three top pulling toothed shafts three lower pulling toothed shafts transport dimensions (length/width/height) 500 / 230 / 150 cm weight 2500 kg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Control: Numroto incl. software Center height: 155 mm Maximum tool length: 270 mm Working area X/Y/Z: 530/400/320 mm Grinding wheel interface: HSK-E50 Spindle power: 16 kW Max. speed: 12,000 rpm Power: 16 kW 4-position automatic grinding wheel changer Kedpfey Eg Ryox Aqgelt including pallet loader with pallets

Condition: used, Number of boring spindles 6 St. Working width 230 mm Working height 160 mm Length of the planing table 2.500 mm Kodpfev Ec Ntsx Aqgelt Feed motor 5,5 kW

Year of construction: 2003, condition: used, Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm- Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW - Feed engine: 2.2 KW - Feedspeed: 5-20 m/min. - Speed spindle 1 and 3: 6.000 rpm. - Speed spindle 2: 7.000 rpm. - Transport rollers D (hardened): 140 mm - Length of infeed table: 2.000 mm - Hardened machine tables Kljdpfx Aqeyatffogst - Guide groove in machine table - Suction nozzles 2x140 mm, 1x160 mm - Volume flow: approx. 5,500 m³/h - Volts/Hz: 400/50 - Location: Blomberg warehouse from 01/2026