CNC profiling center/window construction machine

Weinig Conturex Conturex 2 - C 124

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen Ndodpfet Hagnex Aa Eef

Condition: new, Year of construction: 2025, 2040 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. Ndodpoin Uiljfx Aa Esf WORK AREA: The usable area of our machine tool is 2100 x 4100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Year of construction: 1997, condition: excellent (used), Window making machines Nodpfjiix Uvex Aa Eedf WEINIG automatic tapping and slotting machine UNITEC 10, year 1997 profiling and milling machine UNIVAR 10, year 1997

Condition: reconditioned (used), Shrinking tunnel / foil wrapper Make: Kallfass Type: semi/automatic shrinking tunnel Model: Combimatic 600 Frame: steel painted Range: max. packet W x L x H = 600 x 380 x 400 mm Capacity: max. 600 packs/min Dimensions: L x W x H = 4 200 x 1 550 x 2 000 mm Weight: 850 kg Power-supply: 380 Volt - 50Hz - 23,5 kW Features: mobile water-cooled welding beam automatic / semi-automatic 2 hand control Remark: excellent condition Njdpfsg D Nyhjx Aa Eodf

Condition: new, plate thickness 2,5 mm roll diameter 98 mm throat 160 mm total power requirement 1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 550x1400x1500 m Ndsdpfsfv H Ehex Aa Ejf Delivered with: • manual version • 4 set of wheels • Foot control • Brake motor • Emergency stop

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, tempering furnace reconditioned 2022 Nsdpfx Aaewinuho Eodf

Condition: new, Year of construction: 2023, machine/vehicle number: A2306/9210, The pneumatically working drawer clamp type Box V3.0 ensures a simple and fast assembly of drawers and frames. Thanks to its functional design, it is possible to press single parts as well as complete drawers with different connections. This way, a perfect connection as well as shape of the drawer can be guaranteed. Because of the special clamping process, folding connections and drawer fronts with glass insets cannot be deformed. Ndodpfx Aaegqfnzs Eof Maximum clamping power: vertical: 800 kg / horizontal: 800 kg Adjustable depth stops allow clamping of drawers with longer fronts Lateral press units slowly approach the workpiece Machine operation via joystick. Special equipment: - Digital positioning readout - Kit Door (for frontal clamping of drawer corners) Advantages: - High flexibility: Variably adjustable clamping unit for drawers and frames of different dimensions - Minimum set-up times allow high output - Intuitive operation - High safety standards due to CE-conformity e.g. 2-hand-operation - Plug & Play

Condition: used, Briquetting plant consisting of: * Spänex filter tower with rotary valve * 2 x extraction fans * Spänex SHB 250 K1 briquette press The filter tower extracts the material from the production line, where it is transported to the briquetting press's material silo via a rotary valve and another fan. Material silo: 4 m³ fan: 11 & 4 kW Ndjdpfxjxp Izrs Aa Ejf power: approx. 6 briquettes/min

Condition: used, Sawblade tiltable 0-45 ° Length of the rolling table 3.200, 3.800 mm Nodpfxotg Ailo Aa Esdf cutting width 1.300, 1,500 mm Motor output 7,5 kW Cutting height 177 mm Cutting height at 45° 133 mm Saw blade diameter 500 mm Speed 3000/3600/4200 U/min. work height max. 870 mm Dust suction hood 1x120, 1x100 mm

Condition: new, Year of construction: 2025, Schiatti Angelo BFP12 Double Edger Max. working width: 1.300 - 4.500 mm Processing station with different processing options: 5 / 6 / 8 / 9 / 10 / 11 Spindle - Glasthickness 3-35 mm - min. working width 160 mm - Max. weight: 480 KG - Automatic thickness adjustment via SPS - Tanks for waste water collection Ndsdpjwd Hbiofx Aa Eef - Inkl. turning station