Used Weingarten A 40 for sale (79,101)

Condition: used, Year of construction: 1966, pressure 040 t throat 240 mm stroke 8- 88 mm number of strokes - idle run 130 /min shut height (stroke down, adjustm. up) 320 mm ram adjustment 63 mm Njdpfx Aey Nd Svebyedc table surface area 560 x 435 mm ram surface 250 x 200 mm hole in the table 150 mm table height over floor 950 mm total power requirement 4 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m

Condition: used, Year of construction: 1976, pressure 400 t stroke 30 - 300 mm no. of strokes 55 /min throat 500 mm passage to the back 800 mm dayligth 950 mm table surface area 1580 x 1000 mm hole in the table 400 x 400 mm table height over floor 800 mm ram surface 1000 x 720 mm ram adjustment 125 mm power requirement 37,0 kW Ndsdpfx Aszrpqgebyoc Weight 25,0 t dimensions (WxDxH) 2,5 x 3,1 x 5,1 m with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, semi-automatic stroke adjustment, motorized ram adjustment, pneumatic counterbalance in ram, fix table, motorized central lubrication, two-hand operation

Condition: used, Year of construction: 2006, operating hours: 6,526 h, functionality: fully functional, machine/vehicle number: SN0575, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, nominal power (apparent): 40 kVA, controller manufacturer: Fanuc, controller model: 16i, total height: 2,800 mm, total length: 4,800 mm, total width: 2,800 mm, table width: 400 mm, table length: 400 mm, overall weight: 10,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 6,526 h, spindle motor power: 18,500 W, spindle nose: BT 40, number of spindles: 1, number of slots in tool magazine: 210, Equipment: chip conveyor, documentation/manual, MITSUI SEIKI precision machining center with very few spindle hours, as it was only put into operation in 2017. Matrix magazine with 201 positions. High-pressure coolant system KNOLL 200/1400. Scraper conveyor chip removal system Knoll 450K-1/290. Fanuc 16iMA. Nodpfxez R Rcbj Abyodc Can be inspected while powered on.

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 7,300 h, stroke length: 400 mm, operating speed: 140 mm/s, reverse speed: 180 mm/s, oil tank capacity: 350 l, overall weight: 14,800 kg, total length: 6,350 mm, total width: 3,590 mm, total height: 3,220 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, pressing force: 175 t, clearance between the columns: 3,550 mm, distance table to ram: 720 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, EHT VarioPress 175-40, approx. 7300 operating hours, original EHT tooling, straight bending tool 420 mm x 4000 mm, split, forming pad 220 mm x 4000 mm, split, 2 sets of dies, split, pneumatic tool clamping system, top and bottom, automatic crowning, 2 x adjustable material support arms, table/punch distance, min.: 320 mm, Ndodpfx Abj Aa Nz Seyjc table/punch distance, max.: 720 mm, 3 stop fingers, manually adjustable, 2 sets of upper tools, 1 x forming pad 220 mm, 1 x straight tool 420 mm, original operating manual and electrical diagrams available, annual maintenance and safety inspection carried out, last maintenance in 2025.

Condition: excellent (used), functionality: unexamined, operating hours: 8 h, power: 40 kW (54.38 HP), input voltage: 380 V, input frequency: 50 Hz, Tunnel microwave dryer with conveyor belt for continuous drying. Adjustable microwave power and belt speed, PLC control with separate control cabinet. Stainless steel construction and food-grade PTFE belt. Machine available in Switzerland (Martigny). Water-cooling circuit included. Ventilation system to extract water vapor from the chamber is not included. Technical specifications: General data • Model: HM-40KW-A • Quantity: 1 set • Frequency: 2450 ± 50 MHz • Microwave feed: top feed • Heating chambers: 4 Power / electricity • Microwave power: 40 kW (adjustable) • Rated input power: 50 kW • Power supply: 380 V, three-phase, 50 Hz Ndjdpfszc Hvpox Abyec Conveyor / belt • Belt width: 600 mm • Belt speed: 0.5 – 7 m/min • Conveyor motor: 0.75 kW, frequency inverter • Belt: Food-grade PTFE (high temperature, fire-resistant, anti-corrosion) • Conveyor height: 900 – 1500 mm • Leak-proof opening (microwave suppressor): H 50 mm; L 600 mm Cooling • Magnetron cooling: by water, circuit included Dimensions / construction • Machine dimensions (L × W × H): 5500 × 1000 × 2000 mm • Microwave active area: 4000 × 600 × 1750 mm • Construction: SS304, 1.5 mm thick • Observation windows Control / safety • Control: PLC control screen + separate cabinet • Temperature measurement: Non-contact IR (range indicated 0–350°C, up to 0–500°C) • Safety: Automatic shutdown upon door opening • Microwave leakage standard: GB 5959.6-2008 Conditions • Availability: Immediate • Location: Martigny, Switzerland (currently in the factory) • Condition: To be tested • Inspection: Upon request Transportation costs are the responsibility of the buyer.

Condition: new, Year of construction: 2025, New UWM drilling and milling machine Type: 40A Nsds Aazzdepfx Abysdc Drilling capacity up to: 40 mm

Condition: excellent (used), Year of construction: 2013, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: R1203433 Pos 1000, overall weight: 365 kg, rotor diameter: 400 mm, rotor width: 320 mm, opening width: 340 mm, input voltage: 400 V, power: 22 kW (29.91 HP), A very robust hammer mill from Alpine with grate bars for crushing soft to medium-hard materials. The mill is supplied with an inlet hopper and a device for pneumatic extraction. A control panel is not included. Machine data: 365 kg; 2800 RPM, 22 kW Ndedpfx Aezl E N Eebyjc Rotor 400x320 mm, cast iron rotor, inlet 340x150 mm, Design with grate bars 4 rows of hammers, 5 hammers per row The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: excellent (used), Year of construction: 2016, Initial commissioning: 2016 Control system: Heidenhain iTNC 530 incl. handwheel HR 520 Machine operating hours: Machine powered on: approx. 56,700 h Spindle hours: approx. 15,700 h Spindle hours, current milling spindle: approx. 6,700 h X-axis: approx. 2,400 mm Y-axis: approx. 2,900 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Work table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH60 Spindle power: 63 kW Spindle speed: max. 15,000 min-1 Torque: 300 Nm Tool interface: HSK 100A Tool clamping: hydraulic Coolant supply: external and internal Drive systems for linear axes Feed rate X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Connection data Connected power: 190 kVa Ndodpfs Adtu Dox Abyoc Fuse rating: approx. 315 A Dimensions, weights Footprint of machine with peripherals: approx. 10,000 x 7,000 x 5,900 mm Total weight: approx. 65,000 kg Color Enclosure, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Additional equipment - water-cooled portal - coolant supply with belt filter system - 50-position tool changer - work area cover - chip conveyor - Keller oil mist extraction system Optional, at an extra charge: - Renishaw RMP60 wireless measuring probe - BLUM laser tool measurement system Condition of the machine Fully functional, in very good condition and can be inspected while powered on! More pictures available upon request!

Condition: excellent (used), Year of construction: 2006, Equipment: emergency stop, foot remote control, Capacities: Force: 40 tons Punching: Ø32 x 11 mm Cutting of flat material: 200 x 13 mm 300 x 10 mm Ndsdpj Adrfzjfx Abysc Angle iron: 80 x 80 x 8 mm Solid material: Ø 30 mm 30 x 30 mm Includes length stop.

Year of construction: 1974, condition: used, Offered are two Weingarten single-column eccentric presses. 1) Weingarten AR 125 single-column eccentric press, delivered: 1970, pressing force: 125t, max. sheet thickness: 13mm, stroke rate: 44/66strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. 2) Weingarten AR 125 single-column eccentric press, delivered: 1974, pressing force: 125t, stroke rate: 42/62strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. Inspection possible by arrangement. Ndodpfx Aboz S Iupoyjc

Condition: used, Year of construction: 2000, machine/vehicle number: 510565, functionality: fully functional, operating hours: 5,840 h, Offered for sale is an eccentric press. Make: Müller Weingarten Type: C40.2.2 Rated force: 40t Two-hand / foot control Safety light curtain by Sick Used, fully functional condition. Collection by buyer; support for disassembly/transport can be organized if needed. If you are interested or have any questions, please feel free to send me a message. On-site inspection available by appointment. Further metalworking machinery available, such as bench drills, press brakes, pillar drills, eccentric presses, heavy-duty racks, welding tables, MIG/MAG welding machines, compressors, etc. – please see my other listings. Collection only – disassembly and transport by the buyer or by agreement. If you are interested or have any questions, please send me a message. Further photos and technical details available on request. All information provided without guarantee or warranty; errors and prior sale excepted. For more inquiries, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We can arrange all customs and registration formalities for an additional fee. We can also deliver vehicles to the port for an additional fee. Ndodpfsxvqnbsx Abyoc

Condition: used, axle configuration: 3 axles, first registration: 09/2015, color: other, Year of construction: 2015 Empty weight: 4.950 kg Axle 1: left 5 mm right 5 mm Ndedpfxjzkldae Abyec Axle 2: left 10 mm right 10 mm Axle 3: left 5 mm right 5 mm We have the possibility to stack trailers!

Condition: used, Year of construction: 2000, feed pressure 2,4 bar liter capacity 2.500 l/h Ndedpfx Abj Adu Rmeyec total power requirement 0,57 kW dimensions of the machine ca. 350x150x200 mm

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, pressing force: 400 t, stroke length: 450 mm, table width: 2,050 mm, table length: 1,500 mm, Weingarten OK 400.21.45 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Weingarten OK 400.21.45press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply. Nodsv E Rm Hopfx Abyodc

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Ndedpetx E Rqsfx Abysc Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: excellent (used), Year of construction: 1969, BHU 40/1500 TOS Hostivar Cylindrical Grinder Grinding diameter 400 mm Grinding length 1500 mm Maximum workpiece weight 300 kg Grinding wheel: 600 x 150 mm Longitudinal travel of the table (x-axis): 1 – 1790 mm Grinding head swivels +/- 45° Table swivels +/- 5° Nodszg H E Repfx Abyedc Spindle taper: Morse 5 Maximum rotational speed of the grinding wheel spindle: 1240 rpm / 2100 rpm Total power consumption: 22 kVA Machine weight: approx. 7000 kg Cooling system: none Accessories: none

Condition: like new (used), Year of construction: 2018, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, Year of manufacture: 2018 Table: 4,500 * 2,000 mm Nedpfsz Nifdox Abysdc X: 4,000 mm Y: 3,000 mm Z: 1,500 mm Additional information: Heidenhain TNC 640 HSCI Main spindle ISO 50 Spindle speeds: max 6,000 rpm Tool changer: 60 tools Coolant through the spindle UAD/universal head 0.002/0.002 degrees Many additional options!

Condition: used, Year of construction: 2006, functionality: fully functional, power: 37 kW (50.31 HP), filter area: 169 m², total height: 5,950 mm, total length: 4,650 mm, total width: 2,250 mm, For sale is a complete Aagaard/Finnrose industrial dust extraction and filtration system, manufactured in 2006, from a wood processing company. The system is designed as a screw filter and features a complete dust extraction control system including heat recovery. The main fan is an Aagaard AVD 40 HF/240 with 37 kW. The filter system has approximately 169 m² of filter area with a total of 128 filter elements, each approximately 2,000 mm long and Ø 210 mm. The discharge is carried out via a discharge screw and a rotary valve airlock. Under the discharge, there is a suitable hopper with a volume of approximately 6 m³ on a mobile cart, which is included in the scope of delivery. The complete control cabinet for the dust extraction control and heat recovery is part of the system. The control cabinet includes, among other things, the controls for the rotary valve airlock, discharge screw, and four cleaning groups, as well as a Schneider-Electric frequency inverter for the dust extraction fan. Technical data Aagaard / Finnrose industrial dust extraction system / screw filter Year of manufacture: 2006 Main fan: Aagaard AVD 40 HF/240 Motor power main fan: 37 kW Filter area: approx. 169 m² Filter elements: 128 pieces Dimensions of filter elements: approx. length 2,000 mm / Ø 210 mm Electrical system: 3 × 400/230 V, 50 Hz Rated current control cabinet: 160 A Discharge via discharge screw and rotary valve airlock 4 cleaning groups Complete control cabinet for dust extraction control and heat recovery Frequency inverter for main fan Heat recovery / return air system available 6 m³ hopper on mobile cart included Existing steel substructure can be taken over Extensive existing pipelines available by agreement Dimensions Filter tower including rotary valve airlock: approx. 5,950 × 2,280 × 4,632 mm (L × W × H), height from the steel substructure. Steel substructure: approx. 5,500 × 2,800 × 2,250 mm (L × W × H from the ground). Total height of filter tower including substructure: approx. 6,882 mm. Availability / Dismantling Sale possible immediately. The system is located at CH-3608 Thun, Switzerland. The complete dismantling and removal must be completed by 31.07.2027 at the latest. Dismantling, loading, transport, and any customs clearance will be carried out entirely by the buyer at his expense and responsibility. All required specialists, lifting equipment, cranes, and means of transport must be organized by the buyer. Ndjdpfxez Ik Atj Abyec Inspection possible by arrangement. Sale from the location in its current condition. Technical data provided to the best of our knowledge, without guarantee; inspection by the buyer before purchase is recommended. Selling price: 24,500 EUR Price net, any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer.

Condition: used, Year of construction: 1977, pressure 80 t stroke 8 - 112 mm no. of strokes 65 /min throat 345 mm passage to the back 500 mm dayligth 472 mm table surface area 840 x 610 mm hole in the table 280 / 315 mm table height over floor 800 mm ram surface 650 x 410 mm ram adjustment 71 mm power requirement 13,5 kW Weight 6,10 t dimensions of the machine ca. 1,5 x 1,9 x 3,0 m x m x m Nsdpezrpqmofx Abyedc with motor with two speeds, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation

Condition: used, Year of construction: 1974, functionality: fully functional, pressing force: 63 t, stroke length: 100 mm, ram adjustment: 63 mm, We offer this used Weingarten A 63 eccentric press, year of manufacture 1974, including punching tool. Pressing force: 63 t Strokes per minute: 120 Ram stroke: 8–100 mm Njdpjyryt Tefx Abyjdc Ram adjustment: 63 mm If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 1976, pressure 100 t throat 315 mm stroke 8 - 112 mm table surface area 725 x 570 mm ram surface 410 x 315 mm ram adjustment 80 mm no. of strokes 55 / 82 Hub/min tool shank hole (depth x diameter) 85 x 50 mm dayligth 355 mm total power requirement 7,5 kW Ndedpfougnpisx Abysc weight of the machine ca. 6 t dimensions of machine L x W x H 2,00 x 1,00 x 2,87 m

Condition: used, Year of construction: 1971, pressure 100 t passage width . mm stroke . mm tracking travel 45 mm safety distance 208 mm Follow-up time 149 sec The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Njdjyuttrjpfx Abyodc About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, functionality: fully functional, FESTO DGPL-40-1250-PPV-A-B-KF-GH-SH Linear actuator. Good working condition. Ndsdpfx Abotwqrwjyec Please check out our other listings as well.

Condition: used, Year of construction: 1980, Pressure capacity 1,250 kN Adjustable stroke 20 - 140 mm Stroke rate 70 1/min. Further data and pictures on request Njdpfx Absrm Ntpsyjdc the press is currently not functional and must be mechanically and electrically overhauled

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Ndodpfozxgglex Abyec Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Compressed air: 4 to 5 bars Version: standard version is right-hand Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice