Twin screw extruder

Weber DS 7.22

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Bledpfx Afoxu U Tre Eoc Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: used, machine/vehicle number: 11666, Rotor diameter: 280 mm Rotor width: 300 mm 3 blade rotors Bsdpjghgq Nofx Af Eslc 2 rows of stator blades Inlet cross-section approx. 300 x 280 mm Drive motor 11 kW With noise protection box, noise protection hopper, and exhaust fan

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Bedpevryhyofx Af Eolc Elmepla saw Battenfeld R200/6 Battenfeld V125

Year of construction: 2000, condition: used, Rotational speed: 227/min, power: 31kW, heating output: 7.8kW, length: 1952mm, width: 840mm, height: 1920mm, weight: 820kg. Bodpfsduyyzox Af Eslc

Year of construction: 1993, condition: good (used), functionality: fully functional, used REIFENHÄUSER single-screw extruder with screw size : diameter 50 mm x 33v grooved feed zone and degassing zone Blodpfxspy Eyge Af Ejc type RH 241-1-50-30v with DC-drive 30,2 kW year 1993 with installed switch cabinet Fully functional

Condition: ready for operation (used), Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022. Boden Tpmuepfx Af Ejlc

Condition: new, Year of construction: 2025, This model SGR-1250 is characterized by removed upper and lower segments and also the bending beam is divided into segments. In addition, a foot lever is installed to open the upper bending beam. - Segments of an upper and lower clamping arm expand the application possibilities, - Blocking with the help of a pedal, the hands are free and you can freely position a sheet, - bending bench for universal use in repair and bodywork workshops, - compactly built, modernly shaped, - manual bench for standard tasks, - Segments of an upper span increase the flexibility, Technical specifications: - Max. Working width; 1250mm - bending angle max. 160 degrees - Max. Sheet metal thickness (steel) 1.5mm - Weight 255 kg - segment jaws width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles -Gradscala Price: 5400 euros Wheels inkl. We are looking forward to your contact! Bledpfsc Swkhex Af Eec

Year of construction: 2007, condition: excellent (used), EXTRUDEX EXTRUDER EN50-30D year 2007 no. 4101264, with melt pump, screen changer and 5 layer pipe head Year of manufacture 2007 As well as 4 co-extruders EXTRUDEX EN25-25D, year of manufacture 2007 APPLICATION: Production of PE 5 layer pipes Max diameter 32 mm INVENTORY: 1 single-screw main extruder EN 50 Bsdpfjvyaxujx Af Eelc 4 co-extruders single-screw auxiliary extruders The extrusion system is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6, Germany

Condition: excellent (used), Year of construction: 2006, Single-screw extruder Battenfeld BEX 1-75-30:B with co-extruder BEX 35-30:B Application for PE, PP Year of manufacture 2006 Screw diameter 75 mm Drive Baumüller 171 KW RPM 2,450 Total output approx. 850 kg/h The extruder was converted to frequency drive by Battenfeld in 2014, new three-phase motor and frequency converter Gearbox was overhauled in July 2024 Condition: it is in very good condition Last application PE pipes Battenfeld co-extruder BEX 1-35-30:B Application PE PIPES Connection value: 69 Kva Output approx. 110 kg/h Year of manufacture: 2010 The extruder is my property Bjdpfxeug Edko Af Eolc Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Germany

Year of construction: 2005, condition: refurbished (used), functionality: fully functional, Twin parallel screw extruder - Manufacturer: WEBER - Type: DS 8.5 Blodpfx Asuziyhjf Esc - Year: 2005 - Double parallel screws ø85mm 17D - 5 heating zones on the cylinder + 2 cooling zones - 5 tool heating zones - Engine power: 56kW - Up to 150kg/h profile - 230kg/h tubes Very good condition