Strip leveller 2.000 x 12 mm

WEAN DAMIRON

Condition: good (used), Year of construction: 1998, thread length: 65 mm, Treading machine ORT Italia - RT 10 MACH-ID 9322 Make: ORT Italia Type: RT 10 Control: Siemens SIMATEC Year: 1998 Maximum pressure: 10T Max. workpiece: 30Ø Min. workpiece: 2Ø Min. Threading lenght:2mm Ibodpfxsx H Rmuo An Nsb Max. Threading length:65mm Pitch / lead: 30mm Shaft Ø: 85 - 135mm Length: 1600mm Width: 1400mm Height: 1800mm Weight: 2300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: reconditioned (used), functionality: fully functional, The Barriquand Steriflow 1341 Autoclave is an essential asset for all food processing industries looking to optimize their sterilization processes. Featuring advanced technology and a precise control system, it ensures uniform heat treatment throughout the entire cycle. This guarantees optimal product safety while preserving taste and nutritional qualities. This model stands out for its high reliability and large capacity, making it perfectly suited for industrial-scale operations. Additionally, its reinforced stainless steel construction ensures durable corrosion resistance, while facilitating cleaning and daily maintenance. The fully automated cycles deliver consistently reliable results and significantly reduce the risk of human error. Its intuitive control panel, combined with highly flexible programmability, allows you full control over temperature, pressure, and processing time parameters. This makes it easy to tailor each cycle to suit a wide variety of products, including canned goods, ready meals, sauces, and jarred foods. Investing in this autoclave means choosing proven technology that complies with European standards, boosting not only your products’ shelf life but also the overall performance of your production line. Technical specifications: • Vessel diameter: 1550 mm Ibsdpfxjxg Ec Io An Nob • Maximum temperature: up to 135 °C • Operating pressure: 2 to 2.5 bar • Power supply: 400 V three-phase • Approximate dimensions: L 834 cm x W 160 cm x H 220 cm

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered Ibedpfxjrgzv Nj An Nob * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Year of construction: 1999, condition: good (used), pinch roll unit/felt brake/crop shear for slitting line Ibsdpfjgryl Aox An Nsb strip width: 500 - 1.650 mm strip thickness: 0,4 – 4 mm No. of pinch rolls: 2

Condition: ready for operation (used), Year of construction: 2013, This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Dimensions of machine (lxwxh): 2500 mm x 6600 mm x 6350 mm / weight (kg): 59000 kg • Max workpiece width: 2540 mm / max workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm /max load on table: 30000 kg table height from floor: 850 mm /effective width between columns: 3050 mm/ t-slot (width × number): 24h7 × 13 Ibjdsx D S Ekjpfx An Njb • Cutting feed rate: 1 to 10000 mm/min/ rapid feed rate: 20000 mm/min/ table movement x-axis: 6500 mm /x-axis travel: 6500 mm /y-axis travel: 3500 mm/ z-axis travel: 650 mm • Tool holder: bt50 + masz type/ tool storage capacity: 50 tools /max tool length: 300 mm • Power supply: 400v, 3 /phases, 50hz rated capacity: 513 kva /full load current: 741 a /peak current: 117/138 a /short circuit current: 18 ka • Spindle diameter: 100 mm /spindle speed: 30 to 4000 min⁻¹ • Large table size suitable for heavy loads. /extensive tool storage capacity. /high rapid feed rate for efficient operations.

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Ibedjwpku Dspfx An Neb Fully hydraulic machine Hydraulic drop end Hardened rolls Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11900 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Condition: good (used), JBT FMC Foodtech autoclave / retort in nice condition with upgraded controls. Has come direct from a European pate producer. Single door, 1.4m diameter 6 trolley capacity. We also have 2 x 4 trolley A144 versions from the same factory. Iodjrzbfcspfx An Nobb

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Ibsdpoic Rl Djfx An Neb Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg The hydraulic unit is functional, the drive motor is in the removed state.

Condition: good (used), functionality: fully functional, Diameter range: 99 mm - 180 mm Height range: 90 mm - 250 mm Heads: 3 Production capacity: up to 90 cans per minute Tooling for approx.: 153 mm Isdpfx Anjt Dhv Sj Nobb

Condition: new, JAN REILING BV has an extensive warehouse with more than 15,000 different DEMAG craneparts, from a nut to a complete crane. In addition to new parts, we also supply used parts, hoists and cranes. Our used hoists, cranes, parts and drives are ready in our warehouse completely overhauled. JAN REILING BV immediately supplies what you are looking for. JAN REILING BV has built up an extensive supplier network within Europe. In addition to DEMAG, we can also supply you with parts from all other brands quickly and affordably. Ibjdpfx Anjh Upx Ij Neb We supply various Demag parts new from stock, such as a: ropeguides Rope brakes hoistingmotors drivingmotor gearbox brake hoisting motor bottomblock loadhook runningwheels trolley pushbutton radiocontrol cabledrum types like : KBH KBF KBS KBA KBU 13/3PF 13/6PF 13/3KF 13/6KF 16/6KF 16/8KF 52D 52DF 62D 62DF 63D 63DF 72D AFW D04 D05 D06 D08 ZBA ZBF ZBR DH P100 P625 P632 P425 P408 P412 P1250 P1050 P1600 P2100 DH DMR DR DC PK DK contact us for the possibilities We supply both new and used