Insert milling cutter

Walter F2042

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head Isdpfxovi Hrye Aa Eetr spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .

Condition: ready for operation (used), Year of construction: 1980, Power: 300 to Size of bolster: 1.200 x 850 mm Overhang: 400 mm Width of ram: 1.100 mm Opening in bolster: 400 x 250 mm Daylight: 500 mm Frequency: 32 1/min Stroke: 30 - 140 mm Ram adjustment: 105 mm Weight: app. 19.500kg Isdpfod A Hbcsx Aa Estr Other - allowed for 2-Hand safe working - euqipped by safety valve Herion Xsz 20 - Motorized grease lubrication - Pneumatic ram balancing cylinders - Motorized ram adjustment - T-slots in ram - Stand alone control panel - bearing of con rod overhault

Condition: excellent (used), 16 end mills with indexable inserts Make Walter Itedpfedx D Tvjx Aa Ejr Weight 9.5 kg

Condition: good (used), Year of construction: 2019, Niles N 40 MC - 6000 turning-milling center, year of manufacture 2019, Siemens SI 840 D SL control, X/Z 850/6820 mm, Y-axis -200 / +400 mm, B-axis 0.001°, B-axis swivel range -105° / +95°, tool changer with 192 positions, C-axis main spindle 0.001°, spindle speed up to 1,750 rpm, 2 gearbox stages, max. workpiece weight between chuck and tailstock 6,000 kg, drive power 87 kW, HSK 100 interface, steady rest 70 - 425 mm, tailstock. Itjdpfx Aaow T Ag Ee Eor

Condition: new, pressure 60 t stroke 400 mm daylight longitudinal/sideways 820 x 300 mm dayligth 900 mm liter capacity 6,5 l feed down 6,1 mm/sec feed up 10 mm/sec Motor output 2,2 kW weight of the machine ca. 0,675 t dimensions of the machine ca. 1,46 x 0,85 x 2,1 m Presses can be operated both by hand and by motor. Itsdpfx Aaogg Nn Ss Ejr Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking

Condition: ready for operation (used), Year of construction: 2006, Mori Seiki NL3000Y/1250 Turning Centre (2006) Mori Seiki MSX-850II Control Manufactured & Installed in 2006 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm C & Y Axis Tailstock 12” Chuck Swarf Conveyor Machine Capacity: Max’ Swing over Bed 995mm Isdpfx Aasw Rry Nj Ejtr Max’ Swing over Cross Slide 825mm Max’ Recommended Turning Dia’ 420mm Standard Turning Dia’ 310mm Max’ Turning Length 1260mm Max’ Bar Work Dia’ 90mm X Axis Travel 210 + 70mm Y Axis Travel 120mm (+- 60) Z Axis Travel 1370 C Axis 0.001 Spindle: Main Spindle Speeds 3000rpm 2 Spinde Ranges Spindle Nose A2-8 12” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Machine Dims - 4522 x 2291mm Weight 8100Kgs For sale with Jet Machinery Ltd Jet Machinery Stock No: #78830 Machine Serial Number: NL301FJ0675 Cost: £55,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1984, Technical details: x-travel: 950 mm y-travel: 255 mm z-travel: 250 mm spindle taper ISO: 40 / MK 4 range of revolution per miute: 45 - 2000 / 12 step U/min headstock swivable +/-: 90° vertikal = 90° rechts/links ° headstock swivable +/-: 45° vertical = 90° rechts/links ° feed:: (table) Tischvorschub: X/Y: 16 - 132 mm/min feed:: (table) Tischvorschub: Z: 8 - 66 mm/min clamping table: 1200 x 300 mm total power requirement: 5,4 kW kW machine weight approx.: 1,7 kg dimension machine xH: 1,6 x 2,0 x 2,0 m The spindle head can be swung out. Equipment: with coolant system with cooling water collecting tray Accessories div. milling cutters and milling shafts (comparable in the photo) Ijdou Ndcyjpfx Aa Estr *

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table Iodeb A H Rbspfx Aa Eetr -Table surface: 360 x 660 mm -T grooves: 8x 12 mm -rotatable: by hand with 4x fastening screws -swivelling: via crank -Movable: via crank 200 mm -Number: 1 piece available

Condition: good (used), End mill, shank mill, milling cutter -Two-knife -Finish cutter -Diameter: 32 mm Itodpfx Asb A Hfnsa Eer -Usable length: 80 mm -Corner radius: 2 mm -Type: KHSS-E Quantity: 15 pieces -Sale: only complete set -Weight: 11 kg

Condition: used, Year of construction: 1970, Technical details: x-travel: 1000 mm y-travel: 320 mm z-travel: 350 mm spindle taper ISO: MK4 / SK50 spindle head swivable left - right: 90 ° Distance rear edge of table to column guideway: min.: 45 / max.: 365 mm Itodpfx Asu Ndgfoa Esr throat: 270 mm distance spindle center to table: min. 50 / max. 400 mm range of revolution per miute: 31,5 - 1.600 / 18 step U/min feed:: 25 - 1120 horizontal und 8,3 - 416 vertical mm/min rapid traverse : 3000 horizontal / 1000 vertikal m/min clamping surface area: 1340 x 320 mm machine weight approx.: 3000 kg dimension machine xH: 2,2 x 2,8 x 1,7 m Coolant system 2x counter bearing arbor holder Ø 18 / Ø 60 mm and other accessories in the tool cabinet. i.D. *