Chain excavator

VOLVO EC 300 EL

Year of construction: 2024, condition: new, - Chopping height 240 mm - chopping width 540 mm - chopping length approx. 25-35 mm - Number of chopping knives 2 Codpfxenyidbs Ap Dehd - rotor diameter 600 mm - rotor speed 590 rpm - feed motors 4 + 3 KW - main motor 45 KW / 55KW / 75 KW - 6.000 mm infeed conveyor belt - 2.000 mm conveyor belt underneath the machine

Condition: used, mileage: 59,000 km, first registration: 01/2006, Two-axle 150-hp truck, equipped with a Schmidt SK600 road sweeper, featuring two rotating brushes and a corresponding suction inlet in the wheelbase, as well as a rear suction nozzle. Includes various new spare brushes of different sizes and types. Please note that the vehicle description is intended as a guide and may contain errors or inaccuracies. We therefore advise you to contact us to verify the accuracy of the data. Cedpfxsmiiu De Ap Dshd

Condition: used, Year of construction: 1999, operating hours: 500 h, machine/vehicle number: LC392, Used Water Complete Bottling Line Flat Drinks 300 bph 18.9L CapSnap The CapSnap Adapta Series is a modular integrated bottle washing, filling, and capping system. It is the perfect solution for medium-sized HOD water bottling operations. Designed for adaptability – these machines can be configured to handle both 3-Gallon and 5-Gallon bottles. This complete system effectively handles 300 – 600 BPH. Manufacturer: CAP SNAP – Portola – USA Year of production: 1999 (completely refurbished in 2015 and since then it has worked only 500 hours) Capacity: 300 bph Required energy sources: air 6 bar, power 40 kW, cleaning water supply 2 bar and filling water supply Line composition: Semi-automatic cap removal device: This device is used to remove caps from bottles. Entrance conveyor: On this conveyor belt, the bottles are manually placed. Prewash with cold water through nozzles: This is the first stage of washing, using cold water. Wash with warm water and detergent through nozzles: This is the second stage of washing, which uses warm water at 50°C with detergent. Codpjvgud Sjfx Ap Dehd Rinse with cold water and disinfectant through nozzles: This is the last washing stage, which uses cold water and disinfectant. Bottle filling outlet conveyor: The bottles are filled here, two at a time. UV Filter: The water is filled through a UV filter, which is built into the water inlet of the bottle. Transport of filled bottles to the capper: Here, the bottles are transported from the filler to the capper. Dosage caps through disinfectant on the bottle: Here, the caps are disinfected and ready to be put on the bottles. Bottle cap cylinder: Here the bottle cap is applied. Output conveyor: From here, the bottles are manually loaded onto pallets. Each part of this system has a specific role in the process of bottle filling, and all together they form a functional production Used Water Complete Bottling Line.

Condition: used, Year of construction: 2014, operating hours: 9,700 h, CAT 336 tracked excavator The machine has only 9,700 operating hours and is in good condition Chedpsx Tyq Asfx Ap Dsd Operating weight approx. 36,800 kg

Condition: used, Complete Bottling Line for Water (PET 1.5L) – Overview This used PET bottling line is configured for still water in 1.5-liter bottles, delivering a performance range of approximately 12,000 to 16,000 bottles per hour. Designed for industrial packaging and beverage production, it combines proven second hand equipment from recognized manufacturers to offer a reliable, efficient solution for a used bottling line. The configuration includes preform handling, blow molding, filling, capping support, labeling, shrink wrapping, handle application, palletizing, and conveyors, enabling a seamless end-to-end packaging process. Key components include a preform tipper and elevator by Sameto Technifil, a Siedel SBO10 blow molder, an Alsim Asmojet filler, an Arol cap feeder, a Kronos Contiroll labeling machine, an ACMI Fenix 165 shrink wrapper, and a Smipack HA50 handle applicator. This versatile packaging machinery set-up is ideal for beverage production facilities seeking to expand or replace an existing second hand line with dependable equipment and consistent output. Technical Specifications & Performance Data Production speed: 12,000–16,000 bottles/hour Cedpfx Apjxywgls Dshd Primary product: Water Container type: PET Bottle format: 1.5L Preform tipper and elevator: Sameto Technifil EBH 2050 (2010) Blow molding machine: Siedel SBO10 (2010) Filling machine: Alsim Asmojet (1999) Cap feeder: Arol Labeling machine: Kronos Contiroll (2004) Shrink wrapper: ACMI Fenix 165 (2019) Handle applicator: Smipack HA50 (2002) Additional units: Mixer, palletizing, conveyors Advanced Automation & Control Systems The line architecture supports synchronized operation across blow molding, filling, labeling, and end-of-line packaging through standard industrial control interfaces. Individual machine HMIs typically enable format-related adjustments, recipe selection, and real-time status monitoring. Safety interlocks, guarding, and emergency stop interfaces allow integrated stop/start logic across conveyors and processing units for consistent flow and minimal downtime during production. Production Line Integration Capabilities This complete line is designed for inline operation with continuous bottle flow from preform handling through to palletizing. Included conveyors facilitate smooth transfers between machines, helping to maintain stable throughput at the specified performance range. The configuration is suited for PET water bottling at 1.5L and can accommodate typical beverage production requirements for industrial packaging. Integration with upstream preform feeding and downstream logistics is supported by standard mechanical and control interfaces. Machine Condition & Maintenance History Offered as a second hand used bottling line, the equipment mix spans manufacturing years from 1999 to 2019. The line is presented for sale in working condition and is suitable for recommissioning for beverage production.

Condition: new, Year of construction: 2025, load capacity: 230 kg, lifting height: 8,400 mm, empty load weight: 2,700 kg, transport width: 1,540 mm, All-terrain crawler articulated boom lift, off-road platform, tracked platform Drivable while elevated. Ideally suited for tree and hedge trimming, orchard management, hop field cultivation, and assembly work both indoors and outdoors. Its low weight allows the machine to be transported with a car trailer. FRONTEQ Model: FBZ-6T Payload capacity: 230 kg Platform dimensions: 1.15 x 0.75 m Rotating platform: 80° / 80° Transport dimensions: 5.04 m x 1.54 m Height: 2.10 m Weight approx.: 2,700 kg Working height: 8.4 m Platform height: 6.4 m Maximum outreach approx.: 4.3 m Gradeability up to: 45% Maximum working inclination: 3° / 3° Overload shutoff Proportional hydraulic drive Battery powered: 2 x 4 pcs. 6 V / 230 Ah Integrated charger 24 V / 60 A Csdoxycxaepfx Ap Dshd German operating manual included 2-year manufacturer's warranty Other sizes as well as scissor lifts with crawler or wheel chassis available. For further technical data or offers, availability and delivery time, please inquire. Due to EU regulations, this offer is intended exclusively for commercial customers. Private customers please inquire. Subject to prior sale. All information provided without guarantee. Machines can be collected by the buyer or shipped by freight carrier at the buyer’s expense. Loading and packaging can be organized by us. Shipping costs are indicative and may vary depending on distance and unloading options—please inquire. The displayed sales price is the net final price plus VAT. An invoice showing VAT will be provided. Manufacturer’s warranty 2 years: some spare parts available from our stock. If the offered item is a used product, warranty is 12 months if the purchaser is a consumer as defined by §13 BGB. If the purchaser is a business as defined by §14 BGB, any warranty is excluded. If the offered item is a new product, warranty is 24 months if the purchaser is a consumer as defined by §13 BGB. If the purchaser is a business as defined by §14 BGB, warranty is 12 months.

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, overall weight: 38,500 kg, empty load weight: 38,500 kg, digging bucket width: 299 mm, Year of construction: 2006, operating hours: 13,500 h, Equipment: standard shovel, steel tracks, NEW HOLLAND KOBELCO tracked excavator, year 2006, 13,500 hours, ISUZU 185 [kW] engine, 3,000 hours since replacement, 2.99 [m] bucket, weight 38.5 [tons]. Chedpfx Aezw Ntrep Djd

Condition: used, Max. lifting capacity: 2000kg, radius/lifting capacity: 20m/1000kg or 24m/650kg, hook height: 18m, max. hoisting speed: 45m/min, slewing speed: 1rpm, trolley travel speed: 30m/min, rail travel speed: 25m/min, slewing radius: 2.74m, support width: 4m, counterweight ballast: 9800kg, hoisting class: H1, load group: B3. Documentation available. An on-site inspection is possible. Csdpfx Ajzzqbxep Dohd

Condition: used, Year of construction: 2022, load capacity: 3,000 kg, lifting height: 5,510 mm, total length: 4,800 mm, All-terrain forklift Manitou M 30-4 Drive Diesel Year built 2022 Cedpfsztggnex Ap Djhd Lifting height (mm) 5,510 Lifting weight (kg) 3,000

Condition: excellent (used), Thyristor regulator with field regulator (28211) Manufacturer: Unitek Type: 82 Classic Q. 3 400/450-60 UE 400 UA 450 ld 60 A Ia 120 A Weight: 11 kg Width: 290 mm Depth: 230 mm Height: 225 mm Chedpjhhyy Rjfx Ap Dod