Center Lathe

Voest-Alpine DA180/0,8

Condition: used, turning diameter over bed 430 mm turning diameter over slide rest 230 mm turning length 1000 mm centre height 215 mm centre distance 1000 mm spindle bore 56 mm spindle turning speed range 19 - 2000 U/min total power requirement 7,5 kW weight of the machine ca. 1,9 t dimensions of machine L x W x H 2,78 x 1,25 x 1,40 m Njdpexwp Enefx Agwjwd Accessories: 3-jaw chuck 250 mmø, 4-pos. tool post, solid steady

Condition: new, functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 78 mm, turning diameter over bed slide: 520 mm, center height: 260 mm, turning length: 1,500 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,670 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 2,135 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Center height: 260 mm Center distance: 1500 mm Spindle bore: 78 mm Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20-2000 rpm Drive power: 7.5 kW Weight approx. 2135 kg Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Nwsdpfoctutmox Agwod Fixed center point Set of machine mounting plates

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Year of construction: 2001 Center height: 180mm Center width: 1000mm spindle passage: Ø 56mm max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly Njdpfx Aothd Shjgwjwd - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: ready for operation (used), functionality: fully functional, spindle bore: 42 mm, center height: 165 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 30 rpm, overall weight: 900 kg, Ladies and Gentlemen, Nsdpfx Aou St S Ajgwswd We are selling a Colchester Master 2500 lathe with Heidenhain digital readout. The machine is fully functional and can be tested on site. Availability: immediately Center width: 635 mm Center height above bed: 165 mm Center height above support: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm. 16 steps Inner tailstock taper: MK 3 Drive power: 3.7 kW Space requirement: (LxWxH) 1700 x 880 x 1200 mm Weight: approx. 850 kg

Condition: as good as new (ex-display), operating hours: 6 h, power: 4 kW (5.44 HP), volume flow: 0.57 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, RENNER industrial piston compressor with refrigeration dryer Suction capacity: 700 l/min (delivery rate: 570 l/min) Maximum pressure: 10 bar Pressure vessel: 270 l Motor output: 400V, 4.0 kW Dimensions: 970 x 795 x 1880 mm Upright design for industrial applications, robust belt guard, galvanized compressed air vessel according to AD2000 guidelines (with hand hole) with intercooler and aftercooler, anti-vibration mounts for effective vibration reduction, with refrigeration dryer, optionally with automatic condensate drain for refrigeration dryer and vessel; Nwjdpfod Dhwnex Agwjd Various other configurations available

Condition: new, Timesavers Series 12 WW The machine is equipped with two belt grinding stations; with station 1 you can perform pre-grinding to remove high burrs and splatter, and with station 2 you can achieve a surface finish on the part. The transport speed of the belts is continuously adjustable. The table opening can be adjusted from 0.8 to 100 mm. Nwedpjwqf U Usfx Agwsd

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40–2000 rpm, 16 steps Motor power 1.0 and 1.6 kW, pole-changing Power supply 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps Nwedpfx Agjghtvaswod - Quill movement at vertical milling head 60 mm - Swiveling, rotating, and tilting angle table - Coolant pump in machine base - Separate control cabinet Space requirements L x W x H 1100 x 1100 x 1600 mm Weight 690 kg In good condition

Condition: new, Center length ----- 1500 mm Center height ----- 230 mm Spindle diameter ----- 460 mm Main spindle passage ----- 80 mm Bed width ----- 336 mm Spindle speed ----- 25-1800 rpm Motor ----- 5.5 KW HEAVY DUTY VERSION - WEIGHT 2650 KG INCLUDED * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOB2 with 4 rungs * 3 Chuck 250 mm * 4 Chuck 320 mm * 350 mm clamping plate * Fixed and moving glasses * LED working light and cooling system Nwjdpfoh U Nztsx Agwed * Electric brake CE * Box with various tools

Year of construction: 1963, condition: ready for operation (used), Load: 18t, lifting height: 10,750mm, span: 23,000mm, weight: 35.1t, machine was regularly maintained and inspected. Nsdpfxjh I Edve Agwswd

Condition: new, Bernardo drill grinding machine DG 32 Pro Specifications Drill diameter 2 - 32 mm point angle 90° - 135 Speed 4800 rpm Motor power 0,25 kW Voltage 230 V length 350 mm width 210 mm height 305 mm Weight approx. 32 kg Scope of delivery - Diamond grinding wheel SBC - Collets ER 20, 3 - 12 mm, 10 pcs. (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 mm) - Collets ER 40, 13 - 32 mm, 20 pcs (13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 mm) - Collet holder ER 20 resp. ER 40 Features - Including device for pointing, i.e. better centering of the drill tip on the workpiece and reduction of the necessary feed force - 30 pcs. ER collets included in the scope of delivery, which are also suitable for clamping intermediate sizes - Additional station for relief grinding of the drill cutting edges (clearance angle) Nedegd H U Uspfx Agwowd - Universally adjustable point angle from 90° - 135 - Rotor with precision ball bearing ensures very smooth operation - Fast and precise working results due to simple operation - Vibration-free running due to high dead weight and rubber feet