Pastry machine

VALETTE E GARREAU DST 27 (DN27)

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Following a revision of our long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, supplied complete as per the original OEM scope. The unit is BRAND NEW, fully manufactured and tested by the OEM, but it has never been installed or put into service. It remains under the manufacturer’s warranty and has been stored in a closed, controlled environment. Immediate availability eliminates typical production lead times, which for this type of equipment are generally 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated three-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated output: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz Cedpfxoyidvdo Ac Tohb - Cooling: IC31, air - Brushless construction, parallel grid operation ready Included systems: - Integrated baseplate oil system - Main mechanical oil pump and auxiliary electric oil pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning support from the manufacturer available Potential application fields: - Biomass and waste-to-energy plants, for electricity and process steam production, with immediate unit availability, avoiding multi-year production lead times - Industrial cogeneration (CHP) for facilities with continuous process steam use (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants, as a fast-track alternative to new OEM supply with 24–36 month delivery lead times Price: on request. Further technical information and documentation available upon request.

Condition: excellent (used), Year of construction: 2014, I sell the 2-spindle horizontal multirip saw of polish production Walter OP-500. Year 2014. Suitable for cutting round wooden logs with 2 Spindles. Cutting width 120 - 350mm. Motors 23,8 + 23,8 KW. Total power 54,2 KW. Diameter of main saw blade max. 500mm. Chodpfewini Eex Ac Teb Feed speed controlled by variator up to 20m/min. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: Press Model: T160 CNR6 Serial number: 160/0/46/00 Year of construction: 2000 Nominal force: 1600 kN Weight: 13,800 kg Nominal number of strokes: 55 C/min. Min./max. number of strokes: 10/55 C/min. Max. number of insertions: 17 C/min. Min./max. clutch pressure: BAR 4.0÷5.5 Max. stop time: 0.22 s Safety distance: 355 mm. Energy (i=15% nominal strokes): 14,500 KJ Min./max. stroke: 10/200 mm Ram adjustment: 110 mm. PMI high adjustment: 430 mm Maximum extraction stroke: 60 mm Work surface dimensions (H, D, L): 78/750/1250 mm Ram dimensions (D, L): 600/850 Shank diameter: 60 mm Protrusion from the center: 370 mm Maximum mold size: 600/850 mm Maximum mold head weight: 344 daN Operating air pressure: BAR 5.5÷6 Stop position: TDC Voltage: V 380 Csdjwaiw Sepfx Ac Tehb Frequency: 50Hz Auxiliary voltage: V 24 NEW COMPONENTS INSTALLED: • Safety guards with safety keys; • Clutch plates; • Clutch pins and brite; • Flywheel bearings; • Flywheel oil seals; • Stroke change nose; • Balancing cylinder gasket kit; • Air pressure gauges; • Electrical panel; • Inverter (speed variator); • Motor; • Motor pulley; • Work surface revived on CNC machine Supplied with six (6) months warranty, technical documentation and CE conformity Twelve (12) months electrical panel warranty.

Condition: used, Double-seam folder, 750 mm width. Cjdpezpyc Isfx Ac Tjhb

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, Equipment: CE marking, We are selling a legendary Kronen GS-10 industrial belt slicer, perfect for fruit and vegetable processing. Equipped with a 4 mm slicing blade, 380 Volt, 5-pin plug. Excellent for continuous slicing of firm-fleshed fruits and vegetables. Unfortunately, it was not suitable for our strawberries, so we are selling it after purchasing it new in 2024 (purchase invoice available). Comes with all safety systems and CE certification. The machine's data plate is not available. Organic farm PODERE COLOMBARA DI GIULIA SERRAO (Imola, Bologna) Chsdsyymprepfx Ac Tob

Year of construction: 1995, condition: like new (used), The bucket drainer is the perfect machine for the recovery of 0-4 sand, with low energy consumption and little maintenance. Cjdpfxou Avrto Ac Tehb - Flow rate: 50 cubic meters/h - Motor 5.5 Kw.

Condition: like new (used), Year of construction: 2014, operating hours: 715 h, functionality: fully functional, machine/vehicle number: L62500, arm reach: 1,919 mm, total height: 3,200 mm, total width: 4,600 mm, total length: 5,200 mm, input voltage: 400 V, type of cooling: water, We are offering a Yaskawa TIG welding cell from October 2014 in as-new condition, with very few documented operating hours. The unit was used briefly and then decommissioned, as we no longer produce the components for which it was originally acquired. The system features a rotary table with a maximum capacity of 1000 × 1500 mm, enabling the alternate machining of two parts to optimize cycle times and maximize productivity. It is also equipped with a push-wire (wire feeding) system, useful for overlay welding or areas lacking base material. The installed TIG technology is high-performance, designed for applications demanding high-quality and repeatable weld seams. Technical support is available via Roboteco S.p.A. (Yaskawa), offering reliable after-sales service and an international support network. The machine is immediately available and located in Tre Ville (TN), Italy. The asking price includes: Chedpfxex Exl Ns Ac Tob - Professional dismantling - Loading onto the buyer’s transport vehicle Detailed photos and further technical specifications are available upon request.

Condition: used, Year of construction: 1997, operating hours: 0 h, functionality: fully functional, machine/vehicle number: 00000, ROUND LOG INFEED AND CUTTING LINE - Round log infeed to band saw in a two-part design - Cutting line, 4-4.5-5-5.5 meters (manually and continuously adjustable) with conveyor for sections and sawdust separator, as well as a robust sawdust screw conveyor - Automation and control system, as well as sensors for automatic/continuous cutting - "Nigger" (likely a mis-translation or colloquial term) for positioning logs on the bogie carriage SAWING AND CONVEYING - Carriage: Primultini electric with 2 log turners, length 5.70m • Clamping block 1-2: 86cm • Clamping block 2-3: 145cm • Clamping block 3-4: 220cm - Block band saw BRENTA, roller width 130mm, with control panel for all systems Codpfxszbtq Ro Ac Tjhb - Trimming band saw BRENTA, roller width 130 - PAUL KMEL edging saw, year of manufacture 1974 Incl. roller conveyors for infeed and outfeed Incl. control system and spare parts Incl. crosscut saw for cutting the boards to length - Edging saw “old” type CORONA - Roller-chain conveyors for all saws, as shown in the photos

Condition: used, cutting height (max.): 200 mm, cutting width (max.): 380 mm, saw blade diameter: 350 mm, total length: 3,000 mm, total width: 2,200 mm, total height: 1,900 mm, overall weight: 5,000 kg, A. COSTA LEOPARD double-shaft wide belt sander, 2x75kW (100hp) Chjdjy Rzygspfx Ac Teb

Condition: used, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 380 V, cutting height (max.): 120 mm, cutting width (max.): 300 mm, saw blade diameter: 350 mm, height adjustment type: mechanical, Equipment: saw blade guard, SCM M3 multiblade in good working condition. Very strong and powerful machine, ready to operate. - Feed Track Width, 300mm - Feed Speed, Adjustable - Max Blade Diameter, 350mm - Max Cutting Height, 120mm - Saw Blade Shaft Diameter, 70mm - Weight, approximately 2000 kgs Price 8500€ EXW. One of the most complete and best selling machines of the SCM brand. You can arrange your own transportation or we can assist you. Chjdpfoy Enxrox Ac Tob