Center lathe

VÖEST DA 360

Condition: ready for operation (used), VOEST DA 360 / Heidenhain digital display -Center height above bed: 400mm -Turning diameter above bed: 800mm -Turning diameter above cross slide: 500mm -Turning length: 1000mm -Bar capacity: approx. 87mm -Spindle speed range: 14 - 1000 rpm / 18 spindle speeds -Automatic longitudinal / facing feeds -Automatic rapid traverse on Z-axis -Tailstock MK 5 -Collet chuck 250mm -Multifix base with inserts Fgedpfx Aeza Dh Rsb Njd -Work light -Machine feet -Documentation Dimensions: L x W x H: 3 x 1.5 x 1.7 meters / Weight: 3500 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3815-130-3235, Offer 25380 Technical Data: - Drilling capacity in steel ST 60: 40 mm - Maximum drilling capacity in steel ST 60: 50 mm - Tapping capacity in steel ST 60: up to M 42 - Spindle taper: MK 4 - Spindle stroke: 200 mm Fgsdpfxjxr Ayhe Ab Ned - Spindle speeds steplessly adjustable: 40 – 1100 rpm - Right and left-hand rotation - 3 automatic feeds: 0.1; 0.16; 0.25 mm/rev - Throat depth: 350 mm - Max. distance spindle – table / baseplate: 790 / 1210 mm - Table with 2 T-slots: 630 x 540 mm - Table height adjustable via rack with hand crank - Drive: 400 V / 1.6 / 2.9 kW - Required floor space approx.: W 600 x H 2050 x D 980 mm - Weight approx.: 650 kg - Includes: - Tapping device - Quick-action drill chuck 1–13 mm - Emergency stop button - Work light - Coolant device

Condition: used, Year of construction: 2007, x-travel 620 mm y-travel 420 mm z-travel 400 mm control TNC 320 HEIDENHAIN spindle taper ISO 40 spindle turning speed range 50 - 4.000 U/min Fjdpfsyq Sv Dex Ab Nogd table-size 800 x 400 mm table load 400 kg feeds -stepless- 0 - 8000 mm/min rapid traverse 8,0 m/min power capacity 6,0 kW quill stroke 80 mm voltage 400 V total power requirement 17,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,90 x 2,70 x 2,05 m - .: 90288 - Control: TNC --- - electrical hand wheel - Horizontal milling spindle - Coolant equipment

Condition: used, Year of construction: 2012, x-travel 2134 mm y-travel 1016 mm z-travel 762 mm CNC-control HAAS CNC Table dimensions 2134 x 914 mm max. table load 1814 kg spindle taper SK 50 spindle turning speed range 7500 U/min spindle motor 22,4 kW feed range 1270 mm/min rapid traverse 15,2 m/min tool change unit 30 Pos. coolant IKZ voltage 400 V weight of the machine ca. 13,2 t Fjdpfsx E Dn Nox Ab Nogd dimensions of the machine ca. 4,70 x 2,95 x 2,99 m - Serial No.:1099476 - Year of manufacture 11/2012 - Through spindle coolant TSC - 5-Axis pivotable rotary table HAAS TR310 (as new condition) PRICE FOR MACHINE WITHOUT ROTARY TABLE TR310: 82.000,- EUR

Condition: used, Year of construction: 1986, - incl. various bending tools - year of manufacture: 1986 Specifications - Capacity: 800 kN - Bending length: 2550 mm - Throat depth: 250 mm - Passage: 2050 mm - Stroke: 140 mm Fgjdpfx Aoxdc A Hjb Ned - Stopping time: 140 ms - Backgauge travel: 600 mm - Operating pressure: 300 bar - Motor power: 5.5 kW - Operating voltage: 400 V - Dimensions (W x H x D): approx. 3400 x 2600 x 1300 mm - Weight: 4800 kg

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN 530, workpiece length (max.): 1,250 mm, workpiece width (max.): 850 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 1,200 kg, table width: 850 mm, table height: 640 mm, table length: 1,250 mm, spindle speed (max.): 18,000 rpm, distance table to spindle center: 700 mm, number of slots in tool magazine: 60, Equipment: chip conveyor, rotational speed infinitely variable, DECKEL MAHO DMC 100V Machine after complete rebuild. Spindle overhauled and bearings replaced. Tool measurement laser: BLUM Due to company restructuring, we have for sale: HIGH-SPEED 3-AXIS MACHINING CENTER Manufacturer: DECKEL MAHO Fgjdpfx Abex Elxio Njd Model: DMC 100V LINEAR Control: HEIDENHAIN 530 Year of manufacture: 2003 Table size: 1250x800 mm Travel: X 1000, Y 800, Z 500 mm Workpiece weight: max. 1200 kg Major machine overhaul: 06.2025 Spindle: HSK 63A 18000 rpm Power S1/S2: 15kW/19kW Torque S6 40%ED: 130Nm Tool changer: 60 positions Workpiece probe: HEIDENHAIN Tool probe: BLUM laser Chip conveyor Internal coolant supply (IKZ) Machine in very good condition, after complete overhaul. Regularly serviced. Machine is in continuous operation.

Condition: like new (used), functionality: fully functional, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, with acceptance protocol for tolerances equivalent to new machines. Technical Data: >> Machine Serial No.: 2268-87 >> Centre Height: 180 mm >> Distance Between Centres: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Camlock >> Tailstock Morse Taper 4 >> Feed Rates: 0.026 to 0.888 mm/rev >> Thread Cutting Capability: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake can be engaged >> Drive Power: 2.0/4.0 kW >> Dimensions (LxHxD): 2.2 m x 1.5 m x 1 m Fgodjymznhepfx Ab Nsd Equipment and Accessories: >> 3-axis K&C Digital Readout, new, with 12-month manufacturer’s warranty and manual >> NEW 3-jaw chuck, 200 mm, with 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine light Safety Features: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The ways have been reground or hand-scraped. Acceptance is according to inspection protocol. Finished in 2K gloss white paint. Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and is capable of producing ground-like surface finishes. Take advantage of the opportunity to inspect the machine under power on-site and see its condition for yourself.

Condition: used, Year of construction: 1999, pressure 180 t chamfer lenght 3100 mm distance between columns 2550 mm throat 310 mm stroke 200 mm ajustment speed 80.0 mm/sec working feed 10.0 mm/sec return speed 58.0 mm/sec dayligth 385 mm table width 240 mm work height max. 885 / 1050 mm Fsdpfx Ajxab Erob Negd oil volume 180 ltr. total power requirement 15.0 kW weight of the machine ca. 9850 kg. range L-W-H 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition (!!) - in checked condition - machine video - ?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) * with 4x manually adjustable stop fingers * fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools - 1x rotatable MULTI V universal die block - 2x front / movable support arms - 1x freely movable 2-hand foot control - operating instructions (PDF)

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total height: 2,800 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 800 mm, table length: 1,500 mm, table load: 550 kg, rotary table diameter: 800 mm, spindle motor power: 20,000 W, Chip conveyor 3D measuring probe Paper filtration IKZ 15 Bar Under power X - Travel: 1060mm Y - Travel: 710mm Z - Travel: 710mm A - Axis: 360000° B - Axis: - 30 to + 120° Fjdpfx Aeym Sdyob Negd Table Length: 1500mm Table Width: 800mm Table load: 550 Table Ø: 800mm Feed rate X-Axis: 15000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 20kW Speeds / ranges: 12000Rpm ATC / revolver: 32 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3200mm Width: 2900mm Height: 2800mm Weight: 9500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2006, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg Fgsdjyackdjpfx Ab Ned rotatable C: 360 ° number of toolpositions 2x16 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Achse)