UV dryer

UV-Trockner

Condition: new, Year of construction: 2026, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: Gtsdshw Ng Ispfx Afnsu 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device Program creating lists on PC in XML

Condition: used, Year of construction: 1991, machine/vehicle number: 6172025, Palettenheber mit Wanne / Pile Hoists - Stack Lift Polar L-1000-W-3Baujahr / Year 1991 - Serial-No. 6172025 Format / Size max. 1100 x 750mm Hebekapazität / Loading capacity max. 1000KG Hubhöhe / Lifting height max. 1400mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Gjdpfx Asn Aw Ugjfnotu

Condition: used, 5tSWF Krantechnik GmbH Gsdpfxedc A R Ts Afnetu

Condition: ready for operation (used), -----Konica Minolta Accurio Press C 3080p with 2.6 million copies----- Tested and ready for operation! Gedjwx E E Nspfx Afnstu Equipment: - PF 707m - HT 506 - IC 417 - VI 509 - RU 510 - FS 532 - SD 510 Available as an option: IQ 501 + VI 511 As an experienced retailer of used copiers, we have developed real expertise in packing and pallet shipping to ensure our customers receive machines in perfect condition upon delivery. We ship copiers supplied and maintained by Konica Minolta France. If you have any questions, please do not hesitate to ask me. Our company offers the largest range of Konica Minolta production copiers and handles worldwide deliveries on request. Please do not hesitate to contact us for further information.

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Price is for each machine, NOT for the package. Package is 15% discount. Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's. Gtjdpfx Aetyy Sfsfneu

Condition: used, Year of construction: 1981, machine/vehicle number: 5171754, Palettenheber / Pile Hoists - Stack Lift Polar Mohr HL 600Year 1981 - Serial-No. 5171754 Format / Size max. 1100 x 800mm Hebekapazität / Loading capacity max. 600KG Hubhöhe / Lifting height max. 1000mm Godpoh Ax T Tsfx Afnstu mit Lichtschranke zum automatische Anheben des Schneidgute with light barrier for automatically lifting the material paper Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Size max 750 x 1.050 mm Stroke height 940 mm Lifting capacity max 600 kg Gtodpfod Hp H Iex Afnsu

Condition: good (used), Year of construction: 2010, X Y Z: 1270 x 508 x 508mm, Gedpfx Afjxpw Rvenstu table 1324 x 457mm, 12000 rpm, BT 40, HAAS Control, 24 Station ATC, 40HP, chip auger, coolant, Haas TR210 5 axis trunnion table

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Fully functional and well maintained Gtedpjw Adkfofx Afneu Complete with control cabinet, fences and hydraulic unit, valves etc. Various fruits such as apples, pears, grapes, berries, raspberries, strawberries, quinces, pectin, carrots and other fruit and vegetable can be processed on this press. Prompt delivery.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 265864, turning diameter: 350 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 560 mm, spindle motor power: 15 W, feed rate X-axis: 30 m/min, feed rate Z-axis: 33 m/min, torque: 233 Nm, distance table center to spindle nose: 687 mm, Equipment: documentation/manual, Mazatrol Smart Control. Spindle speed 5000 rpm. Gtjdovfm H Aepfx Afnou X/Z travel 195mm/560mm. Fitted with 215mm diameter. 3 jaw-powered chuck 12-station turret. Tailstock. Tool setter. Part catcher.