Firewood saw

Uniforest 40/20

Condition: refurbished (used), Year of construction: 2001, Balz Debarking Machine BG 90 6W-GR Year of manufacture: 2001 Completely overhauled in 2022 and not reassembled afterwards Minimum diameter: 14 cm Maximum diameter: 90 cm With conveyor systems for infeed and outfeed Immediately available – Fully overhauled Isdpfxey Iabdo Afuoih Location: Austria, near Linz

Condition: repair required (used), Year of construction: 2003, operating hours: 12,500 h, functionality: not functional, Hammel VB 850 E stationary with magnet + 2 pairs of new shafts Iedpfeyt Iawsx Afujih Machine is without gearbox.

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Iijdoxlngaepfx Afush Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: new, Year of construction: 2025, functionality: fully functional, space requirement width: 3,200 mm, space requirement length: 1,200 mm, space requirement height: 2,100 mm, overall weight: 170 kg, total width: 3,200 mm, total length: 1,700 mm, inner dimension width: 1,500 mm, HEAVY-DUTY Drying Rack / Cantilever Rack – for the most demanding applications The most important facts at a glance: 1. Ball-bearing slide for width adjustment from 1.70 to 3.00 m span. 2. Space-saving, as they can be nested inside each other. 3. Large gap of 135 mm for easy loading, even with a fast work pace. 4. Vertically standing, square-profile beam, for minimal contact area. 5. High usable depth of 1,000 mm. 6. High load capacity of 1,000 kg. 7. Very good rollers that make it easy to move the racks, even when loaded. Simply high quality, "made in Denmark". Iijdpfx Aofiuhvofuoh The racks are usually available for immediate delivery from stock. To save on shipping costs for our customers, we pack the racks pre-assembled (see image). Assembly is very quick. Do you have any questions? Contact us, we will be happy to help!

Condition: ready for operation (used), functionality: limited functionality, disc diameter: 525 mm, Weight approx. 1,900 kg Dimensions (L x W x H) approx. 1,800 x 1,500 x 2,200 mm Working disc diameter 525 mm Largest disc ring width 175 mm Largest workpiece dimension 170 mm Working disc speed 45/70/90/140 rpm Iisdpeh Invrofx Afujh Working power, main drive 4.0 kW Connection 400V/50Hz Emergency stop switch Conventional control with operating panel Full-fledged lapping machine, conventional control

Year of construction: 1985, condition: reconditioned (used), REFORM Type AR 10, Type 40H Iedpfx Asd E Np Eefusih Face grinding machine Year of manufacture: 1985 30 kW grinding motor Modicon control system Magnetic control, 6 stages Magnetic size: 1000 mm x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pieces Grinding motor feed: 0.01 mm - 0.1 mm, continuously adjustable Hydraulic oscillating drive New power cables between machine and control cabinet

Condition: new, Year of construction: 2026, Engine power: 14 HP Splitting force: 20 tons LONCIN engine Starting: Puller and key Operating pressure: 18 - 20 MPa Cylinder: Ø101.6 x 610 mm Maximum log diameter: 500 mm Maximum log length: 610 mm Cycle time: 6 - 8 s Return time: 3 s 6-arm splitting wedge 22" STHIL guide bar 74-link chain, 0.75 mm Saw/splitter drive: hydraulic motor/gear pump Ejector length: 3.2 m Conveyor belt (outfeed belt): 6800 x 250 x 4 mm 13" tires Engine oil: 0.8 L (10W30/10W40) Hydraulic oil 30 - 35 L (HL46) Hydraulic pump efficiency 81% Shipping dimensions (W x L x H) 2150 x 1000 x 1200 mm Machine dimensions 6400 x 1200 x 2200 mm Gross weight 650 kg Features: Splitting force of 20 tons – effective splitting of larger and harder logs. Iijdpfx Afjzx Amzsuoh Combustion engine – independence from the electrical grid, suitable for field use. Hydraulic feed and pressure – stable material guidance and safe operation. Hydraulic cutting and splitting – one machine for two key stages of wood processing. Sturdy construction – durable and stable frame for intensive use. Ergonomy and comfort of use – convenient settings and intuitive operation facilitate everyday use. Universal use – suitable for farms, forestry work and professional woodworking.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, operating hours: 313 h, power: 114 kW (155.00 HP), fuel type: diesel, maximum speed: 50 km/h, first registration: 01/2024, next inspection (TÜV): 07/2029, color: green, overall weight: 6,500 kg, front tire size: 540/65R28, rear tire size: 650/65R38, motor manufacturer: AGCO Power, gearing type: mechanical, Equipment: additional headlights, air conditioning, cabin, front power take-off, hydraulics, lighting, trailer coupling, Valtra N155 Forestry – Top-spec – 50 km/h – Front PTO – Olive Green Metallic For sale is a very well-maintained Valtra N155 forestry tractor in the exclusive olive green metallic paint finish. The tractor impresses with its extensive equipment and is ideally suited for both forestry and agricultural applications. Technical data: Manufacturer: Valtra Model: N155 Forestry First registration: 2024 Power: approx. 114 kW / 155 hp Fuel: Diesel Emission stage: Stage V Transmission: DPS Power Shuttle 30/30 Maximum speed: 50 km/h Total weight: 6,500 kg Next §57a/TÜV inspection: 07/2029 Tires: Front: 540/65 R28 Alliance Forest Rear: 650/65 R38 Alliance Forest Equipment: Cab with automatic climate control and footwell heater Front hydraulics and front PTO Iodozi Erbjpfx Afusih Rear linkage HD 4 hydraulic rear control valves Power Beyond 2 hydraulic front control valves Automatic trailer hitch (38 mm pin) Premium work lights 2 yellow rotating beacons Forestry equipment Roof-mounted work light and extensive lighting system The tractor is in very good condition and is ready for immediate use. Viewings are possible at any time by appointment.

Condition: new, Year of construction: 2026, Enclosed and secure sawing area for increased safety through a legally required saw guard. Anti-rotation mechanism for the wood thanks to stamped-in barbs on the saw frame. Sturdy, torsion-resistant steel frame. Transport device for easy movement. Impact-resistant, scratch-resistant, and weather-resistant thanks to high-quality powder coating. Phase inverter. Dimensions and weights Working height: 700 mm Saw frame support: 740 mm Length approx.: 1030 mm Width/Depth approx.: 770 mm Iijdohkz Hispfx Afueh Height approx.: 1095 mm Weight approx.: 92.5 kg Drive Drive type: Electric motor with direct drive Electrical data Power consumption: 5 kW Connection voltage: 400 V Mains frequency: 50 Hz Saw blade Diameter: 700 mm Cutting capacity Saw frame, round timber: 250 mm Location: In stock at 54634 Bitburg - immediately available - Subject to prior sale.

Year of construction: 2020, condition: new, Dimensions: 250x250x80mm Filter systems are used for the thorough separation of finest ferrous metal contaminants. Examination of shoe goods Universally applicable in pipe systems, funnels & slides Isdpodzqw Isfx Afusih Easy handling and cleaning Permanent magnetic filter grids can be manufactured in round, rectangular or square design. Ferrous particles are reliably filtered out of the ware as they pass through the grates. In addition, this design provides easy cleaning of the stave. The filter system can be removed from the jacket with a handle. The maximum operating temperature is 80 ° C.