Straightening plate

unbekannt

Condition: used, Year of construction: 1990, table length 3000 mm table width 2500 mm table height 300 mm total power requirement 0 kW Fodpfjftfcwex Alfogf weight of the machine ca. 5,2 t dimensions of the machine ca. 3 x 2,5 x 0,3 m

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 80 h, functionality: fully functional, machine/vehicle number: 2623-43, working width: 1,100 mm, sheet thickness steel (max.): 100 mm, Edge Processing Machine Timesavers 32 WRBW - Demonstration machine, year of manufacture 2025 Fodpfx Aloytr Hnofogf - Vacuum table for processing mixed materials - Automatic table cleaning - Deburring unit - Edge rounding unit - Finishing unit - Can be offered as a complete system with extraction - Installation and training by in-house service personnel

Condition: used, Year of construction: 1990, length 8000 mm width 3000 mm number 1 Plate thickness 400 mm weight of the machine ca. ca. 14 t dimensions of the machine ca. 8 x 3 x 0,4 m Fgjdpfx Alsv Ey Nqsfef This plate has 10 t- slots in length direction each 32 mm wide.

Condition: used, Year of construction: 1990, length 4000 mm width 1500 mm table height 500 mm total power requirement 0 kW Fodpfxoftfchs Alfogf weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,5 x 1 m

Condition: new, sheet width 2050 mm plate thickness 4,5 mm pre-bending 4,0 mm min. dia. 210 mm roll diameter 140 mm weight of the machine ca. 1530 kg dimensions of the machine ca. 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device Fjdpsyvvrbefx Alfjgf - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: used, Year of construction: 1985, length 3000 mm width 2500 mm Fodpfx Alox Avqhofsgf number 10 Plate thickness 350 mm weight of the machine ca. 5,14 t dimensions of the machine ca. 3 x 2,5 x 0,35 m 10 pieces T- slotted floor plates with 32 mm slots.

Condition: used, Year of construction: 1990, table length 2500 mm table width 1250 mm table height 950 mm total power requirement 0 kW Fedeftfcdjpfx Alfjgf weight of the machine ca. 1,5 t dimensions of the machine ca. 2,5 x 1,25 x 1 m plate is heated.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Italien 74000 € 1398.6 € 1350 mm 0,5 - 170 mm 1370 x 2200 mm 4000 m³/h 200 mm 6 bar 78 (+/-2) dB 1750 mm 2100 mm 2180 mm 2000 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Bonnets for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Fedpfx Aleynmwksfsgf Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 180 Hardness of the rubber wheels Shore 55 Stroke of the contact roller adjustment up-down "Grain adjustment mm 8 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Positioning speed of the contact roller adjustment m/s 10 Grinding belt speed m/s 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 10rotating clockwise and 10counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 20 Oscillation stroke mm 15 Rotation motor power kW 5,5 Revs 1/min 300 - 1000 Oscillation motor power kW 0,37 Grinding brush speed m/s 10,0 ACCESSORIES: B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5.580,00 with Wire Brush 0,3 mm € 5.900,00 R GROUP - GRINDING BELT Motor 15 kW € 1.060,00 OPTIONS: Return to Sender System (Grinding part is discharged to the front again) € 1.290,00 Conveyor belt with vacuum system - 3,0 kW - 300 mm wide € 4.780,00 2 additional PVC coated rollers on infeed and outfeed side € 2.040,00 Tampico Brush System for parts cleaning 0,55kW Ø 150 mm € 4.510,00 Tampico Brush system for conveyor belt cleaning Ø 150 mm € 4.030,00 magnetic conveying system - 2 groups, 200 x 200 mm € 13.520,00 Demagnetiser € 4.940,00 THE MACHINE MUST BE USED WITH AN EXTRACTION DEVICE. WE RECOMMEND AN EXTRACTION SYSTEM WITH 4,000 M³/H.

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm Fsdpfswn Dlmex Alfjgf -Mounting: Hole shaft cone Ø 45-58 mm -Type designation: 407x10-100x127 Quantity: 1x mounting flange available -Dimensions total Ø 180 x 105 mm -Weight: 6.5 kg

Condition: good (used), Grinding wheel mount, standard flanges, special flanges, grinding wheel flange -Grinding wheel mount: Mounting diameter: Ø 76 mm -Shaft: Perforated shaft cone Ø 45-58 mm -Number: 3x mounting flanges available -Price: per piece Fedpfxown Dkvs Alfsgf -Dimensions: Ø 148 x 55 mm -Weight: 3.9 kg/pc.

Condition: good (used), Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 74 by 88 mm 14 mm high Fgedpfx Aocwdmmslfjf -Bore: 56 mm -Drawing with the photos -Dimensions: 100/140/H165 mm -Weight: 5.3 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, swivel cylinder -Hydraulic cylinder: double-acting, stroke 300 mm Fgsdpfxoztpfms Alfsf -Piston rod: Ø 35 mm -Holes: Ø 25 mm / Spacing: retracted 540 mm -Dimensions: 590/85/H105 mm -Weight: 10 kg

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport vehicle: Industrial trailer with 2-axle steering -Platform: 2000/990/H390 mm -Load capacity: 3.3 t -Tires: solid rubber -Number: 2x transport trolleys available -Price per piece -Transport dimensions: 3395/1200/H1380 mm Fgjdpsl Sr Aasfx Alfsf -Weight: 340 kg/pc.