Measuring stick

unbekannt 0-600 mm

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 3000 x 1300 x 2000mm, Table 2000 x 1600mm, table load 13,000 kgs, B axis 360 degrees, Heidenhain iTNC530, ISO SK50 spindle taper, 5,000rpm Spindle Speed, 60 station toolchanger, coolant, Interlocked guards. Hjdpfx Aasvz A Rio Ejg

Condition: good (used), Used radial drill SASS Mod.TRM 2200 Excellent condition, fully functional. Cube supplied Maximum diameter drilling from solid cast iron 20-22 100 mm Maximum diameter drilling from solid steel R=60 80 mm Sliding quill spindle diameter 102 mm Spindle morse taper 6 Spindle vertical travel 500 mm Rotational speed 32 Spindle speed values with 50 Hz motor - rpm/1' 18 ÷ 1600 Automatic feeds Maximum reach from column edge to spindle axis 2230 mm Minimum and maximum drilling radius 660 ÷2505 mm Head displacement on arm 1845 mm Hsdjikqz Sjpfx Aa Eog Vertical arm displacement 1040 mm Column diameter 550 mm Column height with motor 3720 mm Base plate height 260 mm Base plate height 2490 x 1230 mm Spindle motor 11 HP Weight 9000 kg

Condition: excellent (used), different measuring clamps from 100 - 250 mm : 100 - 125 mm make Steinmeyer 125 - 150 mm make Mitutoyo 150 - 175 mm make Steinmeyer Hodpfjgz Amksx Aa Ejg 175 . 200 mm Make Mitutoyo 200 - 225 mm make Pierre Roch Switzerland 225 - 250 mm make Mitutoyo all measuring clamps are in cassettes total. Weight 8 kg

Condition: used, Year of construction: 2004, operating hours: 17,000 h, functionality: fully functional, machine/vehicle number: 77203, travel distance X-axis: 7,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 10,000 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, table length: 7,000 mm, table width: 1,500 mm, coolant supply: 15 bar, spindle motor power: 37 W, Equipment: documentation/manual, Accessories Automatic Milling Head (0.001 degrees in both planes) Cooling Through the spindle 60 ATC Hedpfjwu R R Nex Aa Eog Chipconveyor Renishaw RMP60 part measuring Floorplates 7000 x 1500 mm Rotary Table 1200 x 1200 mm (5t) Extra manual Milling Head

Condition: good (used), Year of construction: 1992, Favretto MB 130 – Technical Specifications Machine type: tangential (horizontal) surface grinding machine Year of manufacture: 1992 Table size: 1700 × 400 mm Magnetic chuck size: approximately 1300 × 400 mm Magnetic plate height: 40 mm Longitudinal travel (X-axis): 1380 mm Cross travel (Y-axis): 450 mm Vertical travel (Z-axis): 550 mm Distance between spindle center and table surface: 203 mm (min) to 753 mm (max) Hsdpfx Ast Rwvzja Eog Grinding wheel dimensions: 400 mm diameter × 152 mm width × 100 mm bore Spindle speed: approximately 1400 rpm Longitudinal feed rate: 2000 to 40000 mm/min Cross feed rate: 50 to 3000 mm/min Vertical feed rate: 700 mm/min Grinding head motor power: approximately 15 kW Total installed power: approximately 25 kW Maximum table load without magnetic chuck: approximately 1500 kg Maximum table load with magnetic chuck: approximately 1205 kg Overall grinding capacity (L × W × H): approximately 1500 × 600 × 550 mm Machine weight: approximately 7100 kg

Condition: used, Year of construction: 1965, core drilling diameter max. 50 mm bore depth 2000 mm swing diameter mm drilling capacity diameter max. 110 mm total power requirement 30 kW weight of the machine ca. 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Hedpfx Aot Hwucoa Eog Weight, approx. 10,000 kg Accessories / Special Features * Machine consists of the following elements: Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection of accessories and drilling tools with Ø up to 100 mm. * Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA). * Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l. * Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return. * 2 closed 3-point steady rests. * FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm. * Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc. * 2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories. This is a very valuable machine because of all the accessories!

Condition: used, Year of construction: 1977, bore capacity in steel (diameter) 75 mm arm length 1700 mm workpiece height max. 370 - 1700 mm total power requirement 12 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m C S E P E L (Hungary) Radial Drill Model RFh 75/2000 Year 1977 Serial No. 61158 _____ Drilling capacity, Steel / Cast Iron, max. 75 / 90 mm Thread cutting Steel / Cast Iron M 60 / 70 Distance between column and spindle centre, max. 1,700 mm Spindle taper ( Morse Cone) MK 5 Vertical stroke of radial arm 380 mm 21 Spindle speeds 19 – 1.900 rpm Base plate 1.100 x 2.300 mm Mounting height, min./max. (base plate) 370 / 1,700 mm Swivelling radius +/- 180 ° Vertical adjustment of radial arm 950 mm Horizontal adjustment of drilling slide 1.500 mm 12 Drilling feeds 0.047 - 2 mm/rev Spindle drive, approx. 10 kW Total electrical load 12 KW - 380 V - 50 Hz Weight 7.000 kg Accessories / Special Features: * Preselector for the Spindle speeds, hydraulically actuated * Choice of Feed rate mechanically * Drilling with or without infeed, respectively manually by a fine feed Hodet Hw Uvjpfx Aa Ejg device/resp. by handwheel * Drill head slide adjustable on radial arm manually, vertical Radial arm adjustment Motorized. * Depth of infeed adjustable by stop dogs on quill dial, with automatic return of quil after stop of infeed * Electro-mechanical clamping of the radial arm and the drillhead via switch * Coolant equipment built in the lower table plate, VOGEL Central lubrication * Built-on cubic table, approx. 600 x 1,200 x 300 mm. This machine is ideal for steel work, tool work, and mechanical engineering. Condition : average to good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: ready for operation (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Hedpfxjv I T Ewe Aa Eog Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: used, Year of construction: 2018, functionality: fully functional, turning diameter: 1,000 mm, turning diameter over bed slide: 710 mm, turning length: 8,000 mm, Used heavy-duty lathe with extensive steady rest equipment – ideal for pipe machining and long rolls! This robust conventional lathe with an impressive turning length of 8,000 mm was specifically designed for pipe machining applications. The sophisticated machine design allows the cutting edge to easily pass the open steady rests – ideal for precise machining of long, hollow workpieces. Technical Highlights: • Turning diameter over bed: 1,000 mm • Turning diameter over support: 710 mm • Center height: 900 mm • Turning length: 8,000 mm • Spindle bore: 155 mm • Machine weight: approx. 18.2 tons • Main drive: 30 kW with frequency converter, continuously variable Design advantages: • Machine bed cast in one piece and artificially aged – for maximum stability and stress-free operation • 5 hardened and ground guideways for maximum precision • Continuous feed control of the longitudinal axis via ball screw – no Norton or lock-box gearing • Electric-driven tailstock with hydraulic clamping • Manually adjustable cross support with trapezoidal thread spindle • 4-station tool carrier, manually pivoting • Triple-guided turning support – for extremely smooth running Steady rests & tube processing: • Various steady rests (stationary and follow-on) optional Available • Motorized steady rest carriers with hydraulic clamping • Spindle adjustment conveniently possible from the operator's side • Traveling steady rests can be mounted either on the left or right Application: Hjdpjv Tnttefx Aa Esg Thanks to its sophisticated design, the machine is ideally suited for light to medium-duty machining – especially for the precise machining of tubes. The continuously variable speed and feed control ensures high flexibility and ease of use.

Condition: used, Year of construction: 1996, center height in crank: 1,100 mm, workpiece weight (max.): 80,000 kg, grinding length: 14,000 mm, grinding wheel diameter: 915 mm, grinding diameter: 2,000 mm, quill stroke: 200 mm, quill diameter: 260 mm, workpiece weight between centers: 80,000,000 g, workpiece diameter between centers: 2,000 mm, workpiece length between centers: 14,000 mm, power: 35 kW (47.59 HP), High capacity cylinder grinder with hydrostatic guides POMINI mod. HD 402/425 - year 1996 - maximum diameter 2000mm - working length 14000mm - tip capacity 80000 kg. Hsdpfxetxlyxe Aa Eeg Possibility of complete retrofit of the machine's electrical unit, manageable updates or modifications for application change. Grinder disconnected and ready for collection.