Deflection pulley conveyor belt

unbekannt Ø 155 x 420 mm

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Codpjic Rl Defx Aqvori Machine weight: approx. 8000kg The hydraulic unit is functional, the drive motor is in the removed state.

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: Credpjua Tbwofx Aqvei The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: good (used), Year of construction: 2003, All parts shown by hand not come. Technical details are shown on picture. Cjdpfx Aqeyyniasvsri

Condition: used, Technical details: x-travel: 700 mm y-travel: 450 mm z-travel: 450 mm control: Heidenhain TNC 121 spindle taper ISO: SK 40 quill stroke vertical: 120 mm spindle head swivable left - right: je 90° ° turning speed range: 40 - 1.600 U/min throat of the milling spindle: 200 mm table surface area: 1.050 x 627 mm table swivable approx.: +45/ -45 Grad table rotating: 360 Grad table movement - horizontal: 200 mm table feed: X/Z 5 - 5.000 mm/min table feed: Y 2,5 - 250 mm/min total power requirement: 8 kW weight approx.: 3,2 kg dimension machine approx.LxWxH: 2,3 x 2,0 x 1,850 m The MAHO MH 800 is a high-quality conventional universal tool milling machine designed for precise milling, drilling, and machining operations. It is ideally suited for toolmaking, mechanical engineering, fixture construction, as well as the production of individual components and small production batches. With Heidenhain 3-axis digital readout (DRO) Universal swivelling table Vertical milling head Crjdpjzibabjfx Aqvei *

Condition: used, fuel type: diesel, Year of construction: 2023, machine/vehicle number: EXVAC SE.10, RIVARD suction excavator EXVAC SE.10 !! IMMEDIATELY AVAILABLE !! RIVARD industrial turbine Detachable suction hose connection 10.5 m³ container volume 4-link boom Hydrostatic drive Filter cleaning Fall protection at the rear / front Camera-based travel monitoring Crjdpfx Aqekl N R Aevoi

Year of construction: 2021, condition: used, empty load weight: 5 kg, Year of manufacture: 2021. Weight: 4.7 kg. Condition: good. 230 volts including case, drilling and chiseling. Multiple units in stock. Price: € 200,- excl. VAT Credpfxezxvh Ee Aqvji

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 9,414 h, Equipment: air conditioning, hydraulics, lighting, power assisted steering, trailer coupling, For sale is a Claas Arion 410 from 2011. The tractor is in good condition, ready for immediate use, and has been regularly maintained. The last maintenance and the occupational safety inspection were carried out in April 2026. Technical data Manufacturer: Claas Type: Arion 410 Year of manufacture: 2011 Operating hours: 9,414 h Codps Afwdxefx Aqveri Equipment Air conditioning and heating Cooling compartment Compressed air system 2 rotating beacon lights Radio Panoramic window in the roof area HUSS diesel particulate filter MK 200 including control unit in the cab Rockinger trailer hitch, unlockable from the cab Transport box on the front weight, 600 kg Retrofitted 270° camera system with three cameras Monitor in the cab for optimal all-round view and increased safety The tractor was mainly used for internal transport tasks. As a result, it was not regularly used for heavy field or soil cultivation work. Maintenance was carried out regularly. The vehicle is in good condition, commensurate with its age and operating hours, and is ready for immediate use. The two front wheel covers have some damage, but this does not affect the functionality of the vehicle. Inspection possible by arrangement. Further information and pictures are available upon request.

Condition: used, mileage: 25,900 km, power: 375 kW (509.86 HP), first registration: 01/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * Mercedes Benz Arocs 3251 suction excavator * 2 units in stock * First registration: 01-2023 * Suction excavator MTS Dino 12 * Stainless steel cladding * Hydrostatic drive for suction, driving, and steering * Power boom EVO Power ARM Gen2 * 2 x turbine * Turbine operating hours: 1,058 h Crsdpfx Aoz I Ic Deqvsi * Compressor operating hours: 943 h * DINO 12m³ container * Stainless steel lining, complete * Power boom EVO-POWER ARM GEN2 * Rotating suction pipe system IKE/PERFOR * Hydrostat-RPM15 * Full cladding DESIGN * High-pressure water system 30 l/min * Biodegradable hydraulic oil * Aluminum fenders * Storage box made of stainless steel on the frame * Container with 2 pneumatic vibrators * Ladder under the hose rack * Light package I: 3 LED lights on the vehicle frame * Light package II: 2 LED lights on the central joint of the power boom * Light package III: LED light strips in the toolbox * Light package IV: Cable reel * Light package VIII: Light bar on the rear * 4 flashing beacons (switchable on the rear) * Anti-slip coating on the lid * Ball-head trailer coupling 3.5t * More pictures and videos via WhatsApp * Information without guarantee and subject to prior sale.

Condition: used, functionality: fully functional, mileage: 22,000 km, power: 405 kW (550.65 HP), gearing type: automatic, fuel type: diesel, color: black, axle configuration: 6x2, first registration: 07/2024, emission class: euro6, Year of construction: 2024, operating hours: 680 h, Equipment: ABS, air conditioning, parking heater, traction control, Available from April 1, 2027. Used suction dredger directly from the manufacturer – for sale or rent. Are you looking for a used suction dredger that is readily available, technically reliable, and economically attractive? At MTS, you can get used suction dredgers directly from the manufacturer – professionally inspected, technically and visually refurbished, and ready for its next assignment. Currently Available: MTS DINO VARIO 8 m³ - SB 1612 on Volvo FH 6 x 2 Suction unit: Tested quality directly from the manufacturer 6 months warranty 1 year/500 operating hours maintenance-free Operating hours of fan: 652h Operating hours of compressor: 670h Standard equipment MTS suction unit MTS double fan MTS material separation system (patented) Automatic filter cleaning, compressed air compressor 4.5m³/min, 8 bar Articulated boom POWERARM with 7m suction hose Codpfx Aszvw U Ueqvori 3 stabilization supports PLC control with optional remote diagnostics Radio remote control (brand: Gross Funk) Storage option Optional module options Container & lid, stainless steel lining Stainless steel design for toolboxes Articulated boom EVO-POWER ARM Rotary suction pipe system IKE/PERFOR Suction & drive & steering HYDROSTAT Electric steering Volvo Full fairing DESIGN High-tip HIGH-TIP with 4 supports (2+2) High-pressure water system 30 l/min Vibrators on the suction hose Industrial equipment Industrial package II: Gas sensor Infinitely variable speed control for fan Filtration unit for oil circuit Environmental equipment Hydraulic oil, biodegradable Noise reduction package: Sound insulation of the container exterior Accessories - Module Container with 2 pneumatic vibrators Access ladder, machine house (2x) Ladder under the hose rack Accessories - Lighting Light package II: 2 LED lights on the central joint of the articulated boom Light package III: LED light strips in the toolbox Light package V: LED lights next to the articulated boom shaft Light package VII: Fire brigade lighting 2x Light package VIII: Light bar at the rear Accessories - Safety 4 warning lights Anti-slip coating Accessories - Filter system Filter cleaning with pneumatic vibrator Accessories - Tools Vogt pneumatic shovel Atlas Copco 20 KG hammer Air lance The general terms and conditions for used vehicles of MTS GmbH apply and can be found at: saugbagger.com/allgemeine-geschaeftsbedingungen Errors and prior sale excepted. The vehicle description serves only as preliminary information. We reserve the right to change prices, equipment, and other details at any time. This information is not binding and does not create any contractual obligations.

Condition: used, mileage: 16,200 km, power: 390 kW (530.25 HP), first registration: 01/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 12 m³, Equipment: ABS, air conditioning, navigation system, parking heater, Service book maintained * Trailing axle unloadable and liftable. ---- Suction excavator MTS DINO12, container volume approx. 12 cbm, stainless steel lining, hydrostatic drive Hydrostat (suction+drive+steer), PLC control with prepared remote diagnostics, radio remote control, HIGH-TIP high tipper with 4 supports, POWERARM strength arm with 7m suction hose, movable strength arm EVO-POWER ARM GEN2, rotary suction pipe system IKE/PERFOR, MTS double fan Power+, HBC control, Industrial Package I: grounding system, Industrial Package II: gas sensor, MTS material separation system, automatic filter cleaning, high-pressure water system 30 l/min, dirty water pump, digital turn assist. ---- * Front axle 9.0 t * Trailing axle, 9 t, steered, unloadable, liftable * Axle ratio i = 4.571 * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Parking brake, electronic * Wheelbase 4,200 mm * Driver suspension seat, comfort * Air conditioning * Residual heat utilization * Additional hot water heater, driver cab * Roof hatch/ventilation flap on roof * Interface, Fleet Management System FMS Codowruw Ijpfx Aqvsri * Trailer socket 24 V, 15-pin * Reverse warning combined with hazard warning lights * M-cabin (medium length) * ClassicSpace M-cabin, 2.30 m, tunnel 170 mm * Sun visor outside, transparent * Compressed air horn * MirrorCam * Bumper, center part towing eyes, coupling mouth * Locking system, with central locking * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Automatic transmission * Mercedes PowerShift 3 * Driver’s seat heating * Wheel formula 8x4 ENA * 32.0 tonner * Air suspension, rear axle * Navigation system * Axle load measuring device * Tank 430 liters * AdBlue tank 60 liters * Fog lights, LED daytime running lights * 2 LED rotating warning beacons * Headlight cleaning system * Engine OM471, R6, 12.8 l, 390 kW (530 HP), 2600 Nm * Engine version Euro 6, E * High Performance Engine Brake * Gearbox oil cooling * Engine PTO rear, c, hydraulic pump ISO 7653D * Front spring 9.0 t, 4-leaf * Tow coupling, rear, Ringfeder * Aluminum rims 9.00 X 22.5 * Aluminum rims 11.75 X 22.5, front axle * Aluminum rims 11.75 X 22.5, trailing axle * Cruise control * Weight variant 37.0 t (9.0/10.5/10.5/8.0) * ATS warranty according to terms and conditions, 3 years/250000 km * Refrigerator on engine tunnel * Storage box * EBS * Without spare wheel ---- Sale only to commercial customers! No guarantee for the information! Subject to prior sale! Only our general terms and conditions apply! We are happy to offer you a leasing or financing option.