Extrusion press

UBE 800 Ton

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Ppodpfjw Ucyuox Ag Nel Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: excellent (used), Year of construction: 2022, operating hours: 3,100 h, functionality: fully functional, travel distance X-axis: 15,600 mm, 5-axis machining center X-axis stroke 15600 mm Y-axis stroke 1400 mm Z-axis stroke 700 mm A+C axis (HS 300 milling head) HSK 11 kW electrospindle Psdpov S Iubofx Ag Nopl 12-position tool magazine 450 mm diameter blade magazine 12 independent automatic vices Cut and separate option

Condition: used, Year of construction: 1998, turning diameter 570 mm turning length 2000 mm control Ppsdpfx Agsugawfj Nol total power requirement 15 kW weight of the machine ca. 3,5 t dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 2016, Kuka KR10 R1100 Sixx KRC4 including panel, cable and control cabinet. Ppodpfx Aomdrpvog Nel 15.700 operating hours We are happy to offer you the robot also reconditioned! 2 more available with: 16.500 operating hours 16.000 operating hours

Condition: used, Year of construction: 1977, pressure 250 t stroke 40 - 190 mm no. of strokes 40 /min throat 500 mm passage to the back 1050 mm dayligth 615 mm table surface area 1380 x 880 mm hole in the table 450 mm table height over floor 800 mm ram surface 1200 x 800 mm ram adjustment 125 mm power requirement 22,0 kW Ppedpfx Asvuuaijg Nsl Weight 24,0 t dimensions of the machine ca. 2,0 x 2,5 x 3,95 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, manual stroke adjustment, motoric centralized lubrication, bolster plate, two-hand operation

Condition: like new (used), Year of construction: 1991, functionality: fully functional, overall weight: 35,000 kg, pressing force: 250 t, type of input current: three-phase, power: 30 kW (40.79 HP), punching force: 250 t, input voltage: 200 V, Equipment: documentation/manual, safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Ppjdpfeu Dxb Tjx Ag Nsl Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel rotation speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 tons, space requirement approx. 3.0x1.5 m The machine will be equipped with a new Siemens S7 control system with new control panel, dressing quill SS electrically controlled via servo motor. Machine will be completely checked, defective parts repaired or replaced. Ppsdpfxouy Ifgo Ag Njl Various options possible (KM system, infeed/outfeed, workpiece rulers etc.)

Condition: excellent (used), Several 150 m³ steel storage tanks (extinguishing water tanks) located underground Volume: 150,000 litres diameter: approx. 3.000 mm length: approx. 22.500 mm Weight: approx. 28,000 kg Pjdpfxefnh Tgj Ag Njpl The tanks are converted to underground extinguishing water tanks according to DIN 14230: The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the design form B without gauge connection. Furthermore, the tank has a venting flange connection in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground. - The tank is emptied, cleaned and has been provided with a bitumen exterior coating by us at the factory. - if required, we can provide the tank with a full bitumen-based interior coating (against corrosion) or epoxy resin interior coating A cost-effective delivery with our own truck is possible. Simply inform us of the delivery location, you will then immediately receive the exact freight costs. An inspection is possible at any time by prior appointment. If you need any further information, just give us a call or send us an e-mail to b.barth (a) barth-tank. de

Condition: used, Technical details: grinding length: 12000 mm grinding width: 2800 mm workpiece height: 2510 mm max. workpiece weight: 24.000 kg table surface area: 11990 x 2500 mm distance between columns: 2820 mm cross rail adjustment: 2510 mm table feed: 1 - 40 m/min total power requirement: 110 kW weight of the machine ca.: 151 t dimensions of the machine ca.: 32,5 x 9 x 6,73 m .....machine is in top condition for high precision work! Psdpfswc A Snex Ag Nepl with CNC SIEMENS 840 D 1 universal grinding head, 22 kW swivelling of the grinding spindle +/-110° grinding wheel dimension 700 x 130 mm vertical stroke 1000 mm with dressing unit 1 surface grinding head, 30 kW grinding wheel dimension 600 x 150 mm vertical stroke 230 mm with dressing unit coolant and filtering unit diverse grinding wheel flanges *

Condition: new, Year of construction: 2024, functionality: fully functional, COMPLETE PLASTIC GRANULATION LINES We offer technologically advanced complete plastic granulation lines designed to meet customer needs. Koltex PRS is a Polish manufacturer of high quality machinery and equipment for the various stages of waste recycling: PP,PE,LDPE,LLDPE,PS,ABS,HDPE. We provide comprehensive solutions and support for machine configuration. The innovative technologies of our recycling systems guarantee the highest degree of user-friendliness and equipment efficiency. We offer all the machines needed to configure a complete plastic recycling line. The XR 8 granulation line is the latest model from Koltex Plastic Recycling Systems in the field of LDPE film processing. In addition to the well-known technological solutions used in standard extruders, a number of changes have been made to achieve high production rates while improving the quality of the regranulate achieved. The new system is characterized by low energy consumption and significantly simplified operation thanks to the new SMART software. Numerous modifications have reduced the machine footprint by 30% compared to the previous model, but also increased productivity by 45% while reducing energy requirements by around 15%. An intelligent temperature control system for the plastic in the Agglomerator and an automatic material dosing system ensure process stability. Thanks to the automation of the process, operator involvement has been reduced to a minimum. Our offer also includes: Complete systems for plastics recycling Mills Plastification systems, vibrating screens, centrifuges Screen changers Pjdpfeuqmavjx Ag Nepl Peripheral equipment Washing lines (DWFS®) Dynamic washing machines Drying separators Granulation and extrusion lines Service and spare parts You can find out more about our range of products in this area at our website