TSUGAMI HS32

TSUGAMI HS32

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Godpfx Asur Hfzefnebh Fanuc 310is controller

Condition: used, Year of construction: 2003, Technical details: bar material dia.: 13 mm turning length: 205 mm turning speeds: 12.000 / 12.000 U/min number of tools: 29 driven tools: ja / yes 19 control: FANUC 16 iT total power requirement: 9 kVA weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,7 x 1,4 x 1,7 m CNC sliding headstock machine, subspindle,Year 2003 (0450) FANUC 16i-T control with 9 axes, 9 axes (X / C1 / Y / E / B / A / X / c2), Main spindle, speed max. 12,000 rpm, C-axis, Counter spindle with collet, speed max. 12,000 rpm, C-axis, Godpsvivygefx Afnjbh 4-fold tool holder 3 transverse drilling apparatuses Revolver with 8 stations various additional tool holders, quills, Extinguishing system Kraft and Bauer High pressure system SF-Systeme Büchele /SHD 150/ 150bar / 2 x 40 um /3 valves, Parts conveyor belt Manuals Operation/Programming/Electrical/Spare Parts Operating tool machine Up to 29 turning tools and up to 19 attachments possible 9.0KVA Tank capacity 170L Loading magazine FMB Turbo 2-16 /3200/A / from Ø2- Ø20 mm / Machine coolant use: Oil Dimensions machine: approx. 2700 x 1400 x 1700 [mm]. Weight machine: approx. 1700 [kg] Dimensions of loading magazine: approx. 4300 x 600 x 1800 [mm]. Weight of loading magazine: approx. 700 [kg]. Dimensions of peripheral HD system: approx. 1500 x 500 x 1000 [mm] Weight of HD system peripherals: approx. 250 [kg] Dimensions peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] Dimensions of peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] *

Condition: like new (used), Year of construction: 2019, operating hours: 1,256 h, functionality: fully functional, machine/vehicle number: HTS.XD.26.A1.0133, Machine Name - Dugard Hanwha Machine Model - XD26H S.N A1.0133 Y.OM 2019 Description - Fanuc i Series control Max Turning diameter 26mm 8000 RPM main and sub spindle Upto 20 tools can be used Godpfswxl Rlox Afnjbh LNS Alpha 312 Barfeed

Condition: excellent (used), Year of construction: 2000, Siemens control unit Bar passage 32 mm Gbjdpewh U Edsfx Afnsh 2 x 12-position turrets with driven tools Main / counter spindle Y-axis turret top Parts lifting device Chip conveyor IRCO bar loading magazine

Condition: excellent (used), Year of construction: 2009, CNC control : FANUC 160i - Accessories available. - Fanuc loading robot - Coolant system (Edge 2 tower from ARO-Technologies) - Oil mist separator (ELBARON SA) Gbedor Ha Dvjpfx Afnoh Travels: X-axis 650 mm Y-axis 300 mm Z-axis 300 mm C-axis swivel angle +150°/ -60° C' axis swivel angle +/- 180° Grinding spindle: Wheel dimensions up to 250 mm Speed 0 - 10,000 rpm. Max. spindle power 26 kW HSK 80 holder Max. Number of disks 6 Workpiece headstock Vmax 180°/s Drive power 1.6 kW ISO 50 mounting Precision (resolution) Resolution linear axes 0.001 mm C-axis 0.001° Dimensions: Length 3100 mm Width 1915 mm height 2190 mm Weight 8'500 kg

Condition: good (used), Year of construction: 2023, Description Machine: Cincom B16E-VI Type: 5-axis precision lathe with FANUC 0i-TD control system We are offering the machines together with an Iemca Elite 112/32 bar feeder (year of manufacture 2023). Technical Data Machining: Main spindle max. bar diameter: Ø 16 mm Max. machining length without re-clamping: 135 mm Main spindle max. drilling diameter: Ø 6 mm Main spindle max. thread diameter: M 6 Sub spindle max. bar diameter: Ø 16 mm Sub spindle max. drilling diameter: Ø 5 mm Sub spindle max. thread diameter: M 3 Spindles, Tools and Axes: Main spindle speed: 200 ~ 8,000 rpm Sub spindle speed: 200 ~ 6,000 rpm Driven tool speed: 200 ~ 4,500 rpm C-axis indexing main spindle: 1° Maximum number of tool stations: 16 pcs Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tool holder: 10 x 10 mm Drive Power: Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical Connection: 200 V, 50 Hz, 3-phase Main transformer: input voltage 400 V / output voltage 200 V Connected load: 5.2 kVA Pneumatic Connection: Compressed air connection: min. 5 bar Compressed air consumption: 44 NL/min Machine Data: Dimensions: 1,590 x 837 mm Machine height: 1,761 mm Spindle height (floor to spindle center): approx. 1,000 mm Gjdpfxevzg Ske Afnobh Machine weight: 1,150 kg Control – CNC contouring control Fanuc 01-TD Smallest input increment: 0.001 mm Smallest output increment: 0.001 mm (Z) / 0.0005 mm (X) Input options: Incremental and absolute Interface: RS232 Main and sub spindle synchronization Standard Accessories Working area lighting Signal light (red/yellow/green) Part ejection and discharge device Coolant tank and central lubrication Door interlock Part catcher and finished parts container 5 turning tool holders (10 x 10 mm) Coolant system with movable jet arms Power chucking system for main and sub spindles

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 10'000 [rpm] COUNTER-SPINDLE - Z stroke : 140 [mm] GUIDE BUSH HOLDER 1 - Number of positions : 5 SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 3 x 380 [V] Gbsdpfx Asuhaxxofnoh - Total installed power : 3.5 [kVA] EQUIPMENT - CNC : Fanuc 21iT - Parts catcher - Coolant tank * with high-pressure pump - Bar loader : LNS Alpha 320

Condition: ready for operation (used), Year of construction: 2013, operating hours: 8,185 h, Control Unit Brand HEIDENHAIN Model iTNC 530 Gedox D Dyajpfx Afnjbh Main Drive Number of axis 5 Spindle Speed 18000 RPM Tool taper HSK 63 Movement X-Axis Movement 600 mm Z-Axis Movement 500 mm Y-Axis Movement 500 mm This 5-axis DMG DMU 60 evo Linear was manufactured in 2013 and features a travel range of 600/500/500 mm, a spindle speed up to 18,000 rpm, and a tool magazine with 60 positions. It includes a Heidenhain iTNC 530 control, internal coolant at 40 bar, and a scrap belt chip conveyor. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2019, Doosan Puma TT2100SYY Mfd. 2019 Tooled as pictured Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES Gbjdpfjw Dvnxjx Afnoh FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING 2 machines available

Condition: good (used), Year of construction: 2013, functionality: fully functional, Gildemeister SPRINT 65 Linear IRCO Breuning bar feeder Chip conveyor High-pressure unit with integrated paper belt filter system and cooling unit Fanuc 310 control Operating hours: approx. 61,550 Production hours: approx. 46,400 The machine can be inspected under power Immediately available Gjdpewwa U Aofx Afnobh