Press brake

Trumpf TruBend 5130

Condition: ready for operation (used), Year of construction: 2011, number of axes: 7, pressing force: 133 t, This 7-axis TRUMPF TruBend 5130 was manufactured in 2011. It has a capacity of 3100 mm and 130 tons, featuring a Wila hydraulic upper and lower clamping system and a bending aid. The machine is equipped with CNC-controlled back gauge for X, R, Z1, and Z2 axes. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 5130 press brake we have for sale. Contact us for further details. • Capacity: 3100 x 130 tons • CNC-controlled back gauge: X, R, Z1, Z2 Additional equipment Gbsde Aifl Ispfx Aikjw • Wila hydraulic upper and lower clamping system • Bending aid Technical Specification Bending Length 3230 mm

Condition: excellent (used), throat depth: 1,100 mm, nominal power at 50% duty cycle: 96 kVA, short-circuit current: 31,500 A, input voltage: 400 V, type of cooling: water, overall weight: 830 kg, Equipment: type plate available, Spot welding machine, type PMS 11-4 G3, 3-phase DC version - specifically designed for welding aluminum sheets - rarely used, completely inspected and cleaned - fully functional, ready for demonstration - rated voltage 400V/50Hz - rated power 96 kVA - welding current 23 kA - connection cable cross-section 10 sq mm/phase - fuse rating 63A Gbsdpfx Aish N Sc Eskow - arm reach 1050 mm (!!) - electrode arm diameter 60 mm - electrode holder diameter 30 mm - electrode force 600 daN - stroke 65+25 mm - electrode cone MK2 - control unit MPS 8043/1 from Harms & Wende with current ramp-up and pulse function - with operating manual - 2-stage foot switch according to UVV standards - main machine switch - pneumatic maintenance unit - weight approx. 830 kg - complete documentation with wiring diagram, compressed air circuit diagram, and cooling water circuit - VAT can be shown separately - delivery from warehouse in Dresden approx. 4 days within Germany - export may take longer! On-site commissioning is subject to a charge and will be billed according to the actual effort involved. The machine is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment.

Condition: new, functionality: fully functional, Year of construction: 2025, stroke length: 300 mm, operating speed: 75 mm/s, reverse speed: 75 mm/s, table height: 930 mm, overall weight: 7,500 kg, total length: 4,350 mm, total width: 1,820 mm, total height: 2,680 mm, input voltage: 400 V, input frequency: 50 Hz, pressing force: 100 t, table length: 3,060 mm, Equipment: CE marking, documentation/manual, safety light barrier, Unique opportunity for those seeking a top-of-the-line, immediately available CNC press brake. We offer a SafanDarley E-Brake 100-3100, 100% electric, a NEW machine installed in our showroom exclusively for technical demonstrations and customer presentations. The machine has never been used in production; the few operating hours are solely related to demonstration activities. Key features: • New machine from showroom • Never used in production • Ready for immediate delivery • High-efficiency electric technology • High bending accuracy and repeatability • Reduced operating and maintenance costs compared to traditional hydraulic presses Machine configuration: • EC20 Touch graphic touchscreen control with 2D bending simulator and automatic bending sequence calculation • Motorized and independent Z1+Z2 axes • Extra back gauge Z0+Z3 Gbjdpfszcmabex Aikjw • Wila upper table with hydraulic locking • Wila lower table with mechanical locking and a set of bars for using Schiavi-type dies • Mobile aluminum front supports • Integrated photocells • Clear opening 590 mm / stroke 300 mm • Interface for Industry 4.0 The machine is offered for sale exclusively due to the renovation of the exhibition area and the replacement of the model currently in the showroom.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, laser type: diode laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 24001, laser hours: 10 h, laser power: 24,000 W, warranty duration: 6 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, nozzle changer, safety light barrier, Standard Equipment Machine - Work area: 4000 x 2000 mm - Enclosed machine frame - Longitudinal conveyor belt - Motion unit for highly precise machining - Gantry drive in combination with linear direct drives - Cooling unit for machine and laser (water-air) - Work area lighting - Positioning laser diode - Spray device - Automatic nozzle cleaning - Integrated control cabinets - Integrated cabinet - Enclosed beam guidance via laser light cable (LLC) - Machine status indicator - Machine for ambient temperatures up to 45 °C - Transport and assembly device TRUMPF Laser - Excitation via pump diodes - Laser power control Cutting Head - Universal cutting head with fully adaptive lens system - Protective glass - Online condition monitoring of the protective glass - Dynamic Focus Control - Automatic nozzle centering Control System - Fast re-production Gbedpfx Aij Afxu Sekjw - SINUMERIK control system - Ergonomic control panel with 21.5″ wide- screen multi-touch color display - Integrated technology data - Automatic shutdown - Programmable gas selection for pressure/cutting - Microweld - Remote support interface - Production plan - Multi-sheet processing - Condition Guide - Cutting Guide Functions - AdjustLine - BrightLine fiber - Smart Nozzle Automation - DetectLine - Drop&Cut - Integrated camera 1 for process monitoring - ControlLine - FlyLine - PierceLine - PlasmaLine - High-speed cutting package - High-speed cutting package Eco - Copper cutting package - Brass cutting package Data Transfer - USB interface - RJ-45 network interface - Online Update Manager Safety - CE marking and EC Machine Directive - Light barriers - Multi-chamber extraction system - Electric roll-up roof - Machine enclosure with certified viewing window door on the right and left Extended Standard Equipment - Compact dust collector - Support strips made of structural steel - Automatic pallet changer in longitudinal direction (standard/heavy-duty) - Nanojoints - Smart Rerun Extended Machine Equipment Extended Laser Equipment - External solid-state laser TruDisk 24001 with BrightLine fiber - Separate laser power supply Additional Cutting Packages - High-speed cutting package Eco - Sheet thickness extension cutting package Extended Machine Equipment - Machine for ambient temperatures up to 45 °C - Prefilter for gases N2 + O2

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: Two chucks Groove function: Standard Power range: 3KW, 6KW Round tube processing range: 10mm~160mm Square tube processing range: 10mm~160mm Chuck maximum speed: 130r/min Gedpfjwwz Dljx Aikebw Machine weight: 3T Power specification: 380VAC, 50Hz Optional loading rack: G16pro-automatic loading, G16pro-semi-automatic loading Optional unloading rack: servo unloading rack, cylinder unloading rack Standard: System 3000DE-DH, including nesting, supports servo, dustproof (Y axis), dustproof (X axis), dustproof (Z axis), rear card hollow dust removal, short tail material Optional: safety fence (light curtain), radiation-proof glass

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 100 kg, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Semi-automatic powder coating system | Batch system with chemical pre-treatment & curing oven Gbsdpsulwg Nefx Aikjw Compact, semi-/partially automatic batch powder coating system for steel components (1,500 x 500 x 500 [mm]). Complete system including 2-chamber spray tunnel (degreasing/phosphating/rinsing), flash-off oven, mobile powder spray booth, curing oven (max. 220°C), cardan chain conveyor, and PLC control. New system / project proposal – special dimensions, heating types, layouts, etc. can be individually adapted to customer requirements. System concept & customer-specific customization: Semi-automatic powder coating system in batch mode for the efficient coating of steel parts. The system combines a compact footprint with high throughput and is ideal for small to medium-sized series components. The pre-treatment process is automated in batch mode, and the coating is applied manually. Note on design: The dimensions, assemblies, and heating types listed below correspond to the indicative offer presented. All components (e.g., useful lengths, booth dimensions, chain path, gas instead of electric heating) can be fully customized to your specific component dimensions, space requirements, and process requirements. - Max. component dimensions (standard indicative offer): 1,500 x 500 x 500 [mm] (variable) - Max. load capacity per carrier: 100 kg per batch (higher load capacities on request) - Space requirement / footprint: approx. 12,000 x 6,500 [mm] (layout can be flexibly adapted) - Total connected load: approx. 88 kW (max.) - Batch cycle time / feed rate: Batch dwell time approx. 8.5 - 12 min at a chain speed of 3.2 m/min Technical data (overview of indicative project) System type: Semi-automatic batch system Max. workpiece size: 1,500 x 500 x 500 [mm] (individually scalable) Load capacity / carrier: 100 kg (higher loads can be designed) Oven temperature: max. 220/250°C; operating temperature 180-200°C Heating for dryer/oven: Gas, oil, or electric (indirect) Max. power consumption: 88 kW (depending on system size) Control: PLC (e.g. Siemens) System components overview: Chemical pre-treatment (3-zone spray cleaning): Compact 2-chamber spray tunnel made of stainless steel for degreasing/phosphating (or alternatively nanoceramic) (40 - 45°C) as well as 2-stage rinsing. Complete with stainless steel pumps, PPR nozzle bars, and extraction (4,000 m³/h). Flash-off oven & powder curing oven: Two thermally insulated chambers (100 - 150 mm rock wool) with indirect electric heating (thermoblock with 16 or 30 kW), stainless steel combustion chambers, and powerful air circulation. Dryer up to 120°C, oven up to max. 220/250°C (automatic lift-up doors optional) Mobile powder spray booth: Mobile, open coating booth (2,000 x 2,100 x 2,200 [mm] with ATEX extraction (6,000 m³/h). Integrated filter unit with 4 pulse valves for cleaning, absolute after-filter, and mobile 60 l powder container. Note: Fully enclosed powder booths are also available! Conveying technology & control: Driven cardan chain conveyor with frequency inverter and automatic lubrication unit. Control via PLC for complete control and adjustment of all system processes (control cabinet equipped with Siemens/Schneider) Scope of supply: Complete system including customer-specific design, assembly, and on-site training.

Condition: new, TECHNICAL DATA Gas-fired preheating furnace, make VEI type: VEI_KO_V_GB_400-350 temperature: 350°C burners power: 2 x 200 kW fans: 2 x 4 kW Godpfx Aiefbgz Iokebw useable dimensions x 2 (h x d x w): 1.000 x 1.400 x 2.800 mm

Condition: good (used), We offer a range of tools for press brakes, almost exclusively from the Trumpf brand: OW / OWZ: Upper tool (punch), Top Tool UW / UWZ: Lower tool (die/matrix), Bottom Tool/Die Details, prices and specifications: OVERVIEW OF INDIVIDUAL SETS (Radius / Angle / Composition): 1. Upper tool (punch) – OW 210/S (R1 / h-240 / 28°) Set composition: 3 pcs x 500 mm, 8 pcs x 300 mm, 2 pcs x 250 mm, 4 pcs x 200 mm, 1 pc x 170 mm, 1 pc x 140 mm, 1 pc x 110 mm, 3 pcs x 100 mm, 2 pcs x 100R mm, 2 pcs x 100L mm, 1 pc x 75 mm, 2 pcs x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 2 pcs x 35 mm, 2 pcs x 30 mm, 2 pcs x 25 mm. Total length of the set: 6.760 m Price per meter: 1,069 EUR Total price of the set: 7,226 EUR 3. Lower tool (die) – EV 004 - W12 (R1 / h-150 / 30°) Set composition: 5 pcs x 500 mm, 1 pc x 200 mm, 1 pc x 180 mm, 3 pcs x 100 mm, 1 pc x 55 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 3.485 m Price per meter: 802 EUR Total price of the set: 2,794 EUR 4. Upper tool (punch) – OW 202 K (R1 / h-120 / 28°) Set composition: 6 pcs x 500 mm, 1 pc x 300 mm, 1 pc x 200 mm, 1 pc x 100 mm, 1 pc x 100R mm, 1 pc x 100L mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 4.050 m Price per meter: 735 EUR Total price of the set: 2,976 EUR 7. Upper tool (punch) – OW 280/K (R0.5 / h-140 / 80°) Set composition: 1 pc x 500 mm, 1 pc x 300 mm, 1 pc x 100R mm, 1 pc x 100L mm, 1 pc x 100 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 1.350 m Price per meter: 735 EUR Total price of the set: 992 EUR 8. Lower tool (die) – EV 005 W16 (R1.6 / h-150 / 30°) Set composition: 6 pcs x 500 mm, 1 pc x 300 mm, 3 pcs x 100 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm, 1 pc x 200 mm. Total length of the set: 4.050 m Price per meter: 802 EUR Total price of the set: 3,247 EUR Gbedpfjzrw A Rsx Aiksw 9. Lower tool (die) – EV 006 W 20 (R2 / h-150 / 30°) Set composition: 6 pcs x 500 mm, 2 pcs x 300 mm, 1 pc x 200 mm, 3 pcs x 100 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 4.350 m Price per meter: 802 EUR Total price of the set: 3,487 EUR Please feel free to request a customized price for the entire tool package!

Condition: used, Year of construction: 1997, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm Gbsdpfjxacfmjx Aiksw stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10.0 mm Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Machine in a well-maintained condition (!!) with only approx. 31.800 operating hours - in checked condition - machine video - ?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * Tool & program library * USB keyboard and mouse interface - CNC controlled axes: Y1 + Y2 / X1 + X2 / R1 + R2 / Z1 + Z2 / I axis - CNC controlled back stop (X1 + X2 axis) - CNC controlled height adjustment of the back stop (R1 + R2 axis) - CNC controlled adjustment of the stop fingers (Z1 + Z2 axis) - CNC controlled, pneumatic die displacement (I axis) - CNC WILA electro-motoric table crowning - TRUMPF hydraulic upper tool clamping - TRUMPF manuel Lower tool clamp - 1x freely movable 2-hand / foot control - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + spare parts list

Condition: as good as new (ex-display), functionality: fully functional, Timesavers Series 10 The Series 10 features a pivoting head and a side for quick abrasive wheel changes. We use this side to remove spatter and high burrs. The second side has a mount for a flap brush, which is used for edge rounding and finishing. Due to the various tool options, the Series 10 is a true all-rounder and is suitable for deburring, edge rounding, finish sanding, and removing heavy scale. The 180° rotatable head allows for quick and easy tool changes. The machine is equipped with a vacuum system, and the motor speed is continuously adjustable. The machine is extremely flexible, comes with rollers for easy movement, and its simple operation makes it a user-friendly machine that is accessible to everyone. Gbsdpfxeznlyvj Aikew