Laser cutting machine

TRUMPF LiftMaster 1530 (AL35)

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Year of manufacture: 1998 Made in: Poland Cjdpfxoxlcp No Aqvjri Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Line includes: Decoiler 5 T Recoiler 5 T Multi-knife disc shears Braking and separating segment Turnstile with separator Control panel Purpose: The line is intended for preparation of coil metal for further processing: decoiling, precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm Csdpfx Aqou Ngybsvsri table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Equipment: - oil tank Ø 300 x 600mm - control panel i.D. *

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm Crsdpfera Rrhjx Aqvoi x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200

Condition: used, sheet width 250 mm coil outside dia. 1400 mm weight max. in kg 2500 kg plate thickness 2 ... 4 mm straightening feed 2,5 ... 15 m/min coiler: expanding range mm total power requirement 1 + 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m Csdpfx Aqefn Aqmjvsri decoiler, MHR 250/4: max. coil diameter: 1400 mm coil diameter inside: 450 - 530 mm unbraked decoiler with pressure roller straightening machine, MR 250/4: Belt infeed height: 1250 mm The system was dismantled, checked and repainted.

Year of construction: 2023, condition: new, ! Machine offer for customers in Lithuania / Latvia / Estonia. Crsdpfx Aqsiy N Npjvoi The LVD PHOENIX laser is fiber laser cutting machine which combines high dynamics with flexibility for cutting thick material. PHOENIX is available in different sizes: 3m x 1,5 m, 4m x 2 m and 6m x 2m. Power source varies from 4kW to 20 kW. As standard machine is equipped with automatic shuttle tables, cutting head, adaptive collimation unit (until 12kW), capacitive height sensing, automatic nozzle cleaning, automatic sheet referencing, automatic cutting gas selection (oxygen, nitrogen and compressed air), chiller and fume extraction, SIEMENS control unit. The PHONEX laser cutting machines are compatible with huge range of automatization solutions such as loading / unloading and sheet storage (up to 6 meters), nozzles changer. Shuttle table All PHOENIX lasers come with automatic shuttle tables. The height of the table is 930 mm. The speed of table change depends on laser size: for 3015 – 35 sec., for 4020 -39 sec. and for 6020 – 48 sec. Tables on PHOENIX 4020 and 6020 models are split into 2m x 1m modules for easy replacement. Cutting head Laser source power on PHOENIX laser cutting machines varies from 4 to 20 KW (available: 4kW, 6kW, 10kW, 12kW, 20kW). The cutting head for 4 – 12 kW lasers could be equipped with 150 or 200 mm focusing lens, for powerful 20kW lasers – 250 mm focusing lens are used. Frame The PHOENIX 3015 model has a welded steel mono frame construction. This allows high accelerations without losing the accuracy. Due to the high frame rigidity, no special foundations are requested. The frame of PHOENIX 4020 and 6020 exists out of 4 parts. One rigid left and right frame that are connected with two bolted beams.

Condition: new, functionality: fully functional, Year of construction: 2025, stroke length: 300 mm, operating speed: 75 mm/s, reverse speed: 75 mm/s, table height: 930 mm, overall weight: 7,500 kg, total length: 4,350 mm, total width: 1,820 mm, total height: 2,680 mm, input voltage: 400 V, input frequency: 50 Hz, pressing force: 100 t, table length: 3,060 mm, Equipment: CE marking, documentation/manual, safety light barrier, Unique opportunity for those seeking a top-of-the-line, immediately available CNC press brake. We offer a SafanDarley E-Brake 100-3100, 100% electric, a NEW machine installed in our showroom exclusively for technical demonstrations and customer presentations. The machine has never been used in production; the few operating hours are solely related to demonstration activities. Crsdpfezcmabox Aqvji Key features: • New machine from showroom • Never used in production • Ready for immediate delivery • High-efficiency electric technology • High bending accuracy and repeatability • Reduced operating and maintenance costs compared to traditional hydraulic presses Machine configuration: • EC20 Touch graphic touchscreen control with 2D bending simulator and automatic bending sequence calculation • Motorized and independent Z1+Z2 axes • Extra back gauge Z0+Z3 • Wila upper table with hydraulic locking • Wila lower table with mechanical locking and a set of bars for using Schiavi-type dies • Mobile aluminum front supports • Integrated photocells • Clear opening 590 mm / stroke 300 mm • Interface for Industry 4.0 The machine is offered for sale exclusively due to the renovation of the exhibition area and the replacement of the model currently in the showroom.

Condition: used, CNC CONTROL Controller: Hurco MAX5 AXES Number of controlled axes: 5 Number of simultaneous axes: 5 X-axis travel mm: 3.200 Y-axis travel mm: 2.100 Z-axis travel mm: 900 B-axis degrees: C-axis degrees: ±360 Distance spindle nose - table surface mm: 66 - 966 Feed rates m/min: 10 / 10 / 10 Rapid traverse m/min: 15 / 15 / 10 WORKTABLE Table dimensions mm: 3.000 x 1.700 Number of T-slots: 7 T-slot width mm: 22 H8 T-slot spacing mm: 220 Max. table load kg: 11.000 SPINDLE Max. spindle speed rpm: 18.000 Spindle power kW (S1/S6): 45 / 63 Crodpjz Aqhbefx Aqvsi Spindle torque Nm: 106 Spindle taper / interface: HSK63-A COOLING Coolant through spindle bar: 40 TOOL SYSTEM Tool holder / taper: HSK63-A Tool magazine capacity: 60 Max. tool diam. (free adj. places) mm: 76 Max. tool length mm: 300 Max. tool weight kg: 7

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 22,372 h, laser hours: 11,345 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 16,000 kg, total length: 11,600 mm, total width: 5,200 mm, total height: 2,200 mm, working range: 40,002,000 mm, Equipment: cooling unit, Standard Features: • Enclosed machine frame with integrated laser unit • Laser unit: TruFlow 2000 CO₂ laser with high-frequency excitation, maintenance-free turboradial blower, reflector telescope, cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor belt for small parts/waste • Drive: Maintenance-free three-phase servo motors • Cutting head quick-change device Laser cutting head with 5" lens and laser cutting head with 7.5" lens • Programmable cutting gas pressure setting • ControlLine capacitive height control and process control Cjdsv Sm Rujpfx Aqvori • Automatic focus adjustment with FocusLinePlus • Laser power control • Positioning laser • NitroLine high-pressure cutting • Fast processing with SprintLine • Automatic production of smaller holes • PlasmaLine plasma sensors • Automatic sheet metal surface and edge detection • Programmable Performance cycles • Microweld • Spray device for safe thick sheet processing • Automatic blow-off system • Residual heat extraction • Sinumerik 840D control system: Open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice • TruTops Laser lite workshop programming Safety: • Multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin • RJ45 network connection via installation via teleservice • 3.5" floppy disk drive • TFT color display More powerful lasers: • TruFlow 4000, including NitroLine Plus, nitrogen beam tube ventilation and lens monitoring sensors Extended machine equipment: • PierceLine Process Control System • A total of 2 Machine auxiliary pallets, structural steel webs • Crane-mounted traverse for manual pallet handling • Pneumatic cutting

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, working width: 4,060 mm, stroke length: 300 mm, throat depth: 1,000 mm, distance between stands: 4,200 mm, operating speed: 90 mm/s, table height: 1,000 mm, back gauge travel distance R-axis: 150 mm, overall weight: 17,000 kg, total length: 5,300 mm, total width: 1,950 mm, total height: 3,000 mm, warranty duration: 6 months, pressing force: 200 t, Equipment: safety light barrier, SAFANDARLEY E-Brake press brakes have an electric drive. Lenze servomotors controlled by inverters from the same company allow for fast and reliable operation of the system. Crjdpfx Ajvpqpijqvji Additionally, the machine consumes electricity mainly when the slider goes down. The slider returns using the force resulting from the spring package on both sides of the machine. When the machine is not in use, it does not consume electricity because there is no pump in the system as in hydraulic presses. Electricity consumption is estimated at 70% lower than in conventional hydraulic presses. Servo-electric press brake SAFANDARLEY model E-Brake Pressure 3000 kN (300 tons) Slider stroke 300 mm Opening Q=690 mm Upper beam exit speed 90 mm/s Upper beam accuracy +/- 0.01 mm CNC controlled axes: Y1-Y2 - upper beam control with the possibility of using skews X - bumper beam exit (gives the dimension of the bent element). Very high positioning accuracy. delta X - independent bumper finger used for skewing R - bumper beam top/bottom, stroke 200mm Z1-Z2 - bumper fingers sliding along the bending line (speed 2000mm/s) Max bumper finger speed 350mm/s Max bumper finger range (third reference point range in X axis) 1000mm R axis bumper range 200mm Connected power 22kW (controlled by inverter) Weight 17,000kg Machine width 5,300 mm Machine depth 1,950 mm Machine height 2,810 mm Power supply 3/N/PE 50Hz – 400/230V Servo-electric drive (without hydraulic system) Drive transmission by means of belts

Condition: good (used), Kemper SP125 A 2 speeds 2 stainless steel bowls Stainless steel spiral and bar Csdpfx Aqsva Rikjvsri Machine works perfectly and is in very good condition