Center Lathe

TOS SV 18R

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers Iijdev Hzqxjpfx Akpjh - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Condition: as good as new (ex-display), Year of construction: 2023, Container rotating device, 10-ton lifting capacity Iedpfxod Nmx Te Akpeih Speed: continuously adjustable Hand and foot remote control Diameter: 320mm to 2800mm Roller diameter: 300mm Speed: 6 - 60 m/h Power: 2 x 0.55 kW

Condition: excellent (used), I am selling this machine, connected, can be tested. Max. workpiece diameter ..... 1600 mm Module ..... 16 - Power of the main electric motor ..... 12 kW Dimensions l x w x h ..... 4300 x 2000 x 3170 mm Iodpfjv Nqppox Akpjih Machine weight ..... 18500 kg Can send a video of the machine, via whatsapp.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 15,043 h, laser power: 3,600 W, travel distance X-axis: 6,500 mm, number of axes: 4, This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. • Circular diameter: 200 mm • Reject station: 3 m with brush table • Reject tray • Working Range X Tube Axis: 6500 mm • Outer Circle Diameter: 254 mm (Upgraded from standard 200 mm) • Unloading Station: 3 m with brush table, front unloading • Laser Type: CO2 Laser TruFlow 3600 including LensLine (Surcharge upgrade from standard TruFlow 2000) • Control: Sinumerik 840D, Teleservice • Standard Software/Features: NitroLine, FocusLine, SprintLine, Laser power control, Programmable cutting gas pressure, Program re-entry, Automatic shutdown, Workspace lighting, Laser logbook function, Laser cooling unit • Laser: CO₂ laser TruFlow 2000 • Laser cooling unit • Cutting Head: Lens cutting head with 155 mm focal length, ControlLine • Control unit: 84D Iijdpfox D I H Dex Akpjh • Connectivity/data transfer: RJ-45 network connection, USB connection; network connection incl. installation • Safety: CE marking, Multi-beam light barriers, Compact dust extractor 1500 Nm³/h, Protective cabin with Makrolon panels • Ambient Operating Temperature: Up to 43°C • Installation Type: Special machine installation setup Additional equipment • Accessories: • Spare parts case for cutting heads • 1 x remote control kit • Clamping jaw set Ø 16 / 200 mm • U-shaped guide rails for reject station with ID = 200 mm • Automation: • Loading Unit: LoadMaster Tube 6.5 m with bundle support, 2 grippers, 254 mm outer circle diameter capacity, low-scratch design for 6m, swiveling conveyor line, additional gripper D=254 mm • Options for LoadMaster Tube 6 m: • Circular diameter 250 mm • Shorter belt support • Swivelable conveyor section • Additional gripper Ø 200 mm • Additional gripper Ø 250 mm • Special equipment: • Flexible reject station 4.5 m (prototype) instead of reject station 3 m, without brush table • Special installation for flexible reject station • LoadMaster (series version 103) • Installation 100 mm higher (use of wire mesh container possible), decision upon acceptance

Condition: used, turning diameter over bed 435 mm turning diameter over slide rest . mm turning length 750 mm - Accessories available. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Iijdpfx Asyqvgmjkpjh We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1993, 1 used lathe with guide and draw spindle Manufacturer: Weiler Iedpjzq R Ecofx Akpoih Type: Praktikant 160 B Year of manufacture: 1993, with 3-axis digital display, very good condition, CE compliant Technical data: Center height: 160 mm Center distance: 650 mm Spindle speeds: from 24 to 2500 rpm Spindle bore: 40 mm Short taper spindle head, DIN 55027, size 5, with bayonet lock Tailstock: MK 3 Feeds: from 0.02 to 0.63 mm/rev Possible threads: metric, inch, module, and diametral pitch Metric thread pitches: from 0.25 to 8 mm Weight: approx. 680 kg Spindle brake can be engaged Length: 1.6 m, height: 1.25 m, depth: 0.7 m Accessories and equipment: 3-axis digital display The machine comes from a vocational training center and is in very good condition.

Condition: new, cutting diameter 355 mm dimensions of saw-band 3770 x 34 x 1,1 mm cutting speed 20 - 80 m/min cutting width 490 x 280 mm 290 mm Impact energy 250 mm 230 mm 180 mm connected load frequency 400 Volt Iiedpfx Asmhm Aqskpsh total power requirement 2,2 kW weight of the machine ca. 0,7 t dimensions 1,43 x 0,72 x 1,7 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling

Condition: excellent (used), Year of construction: 1979, turning diameter over bed 480 mm turning diameter over slide rest 295 mm turning length 1000 mm spindle bore 56 mm Iiodpeyiu T Asfx Akpjh weight of the machine ca. 1,8 t dimensions of the machine ca. 1,4 x 0,8 x 1,6 m

Condition: good (used), Rolling width: 2050mm Rolling thickness 3x toproll Ø:18mm Iiodpowtpgtofx Akpoh Rolling thickness 5x toproll Ø:21mm Rolling thickness prebending: 12mm Top Roll Ø: 280mm Side roll Ø: 260mm Number of rolls: 3 Rolling speed: 0-5 Adjustiment lower roll: 0-150mm/min. Adjustment side rolls: 0-150mm/min. Top support: yes Power: 12kW Length: 3000mm Width: 1500mm Height: 1600mm Weight: 5200kg

Condition: used, functionality: fully functional, spindle bore: 62 mm, turning diameter: 410 mm, center height: 205 mm, turning length: 1,500 mm, type of input current: three-phase, Parallel lathe Norwich Orion Mod. c 6241 / YZ 1500 Centre height: 205 mm Swing over bed: 410 mm Distance between centres: 1500 mm Bar passage: 62 mm Ijdpjy N T R Isfx Akpeih Main motor power: 5.5 HP Steadies included