Hydraulic unit for elevators

Thyssen-M.A.N. 11,1 kW

Condition: excellent (used), Year of construction: 2021, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 229404, overall weight: 50 kg, power: 2.8 kW (3.81 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 4 A, Purchased and installed. Found to be too strong so removed. It has been used a total of 10 minutes. 1250L/min 3 Phase Dujdpjrqgaujfx Akkjw Max head. 20m IP68

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) Dusdpog Ezarefx Akksw -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, functionality: fully functional, Truxor Amphibious Vehicle Suction Excavator with pump and cutter, grab for removal of sludge, sediment, or aquatic vegetation. The Truxor DM 5045 is an amphibious tool carrier, specifically designed for operations in water bodies, wetlands, and shorelines. Engine: Kubota V1305, liquid-cooled, 4-cylinder, water-cooled turbo diesel. Emission standard: EURO 3 33kW/44.9 hp/3000 rpm. Coolant volume: approx. 8 l. Electrics: Generator 12 V, 40 amp, 45 Ah battery, work lighting. Fuel: 35 l tank, consumption min. approx. 3.8 l/h, average approx. 4.5 l/h. Hydraulic system: demand control with dynamic adjustment, max. 140 l/min. Tank capacity 19 l + system approx. 36 l. Control via joystick: vehicle movement, lifting, tilting, weight distribution. Cab: foldable canopy, adjustable driver's seat, instrument panel. Speed: 0-100 m/min (without attachments). Front lift: lifting capacity 250 kg. Quick-change attachment system, tilting function. Duodpfxjyn Hpae Akkjw Saltwater-resistant aluminum, hot-dip galvanized steel frame. Length: 4,700 mm, with lifting arm 5,000 mm. Width: 2,060 mm. Height max. 2.59 m, min. 1.9 m. Weight: 1,400 kg (vehicle only), additional weight for attachments. Truxor available ex stock Gladbeck without trailer.

Condition: excellent (used), Year of construction: 2011, operating hours: 28,000 h, functionality: fully functional, clamping force: 1,300 kN, For sale is a hybrid injection molding machine, 2 components, of the brand KraussMaffei and type KM 130-750 CX The machine is in very good condition, ready for immediate use, with low operating hours. Electronic injection unit and dosing unit, hydraulic clamping unit. Technical data: Year of construction: 2011 Operating hours: 28,000 h Dedpfsu Hxm Uex Akksuw Clamping force: 130 T Cylinder Ø 30mm / 40 mm (& 2*50mm additional) Core pull: 1*Hydraulic Valve gate: Pneumatic Tie bar extension: 160 mm Internal pressure transducer Selector switch On request, transportation and loading can be organized at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 9,300 h, load capacity: 3,500 kg, lifting height: 4,700 mm, free lift: 1,500 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, gearing type: automatic, battery voltage: 80 V, battery weight: 1,580 kg, fork length: 1,150 mm, tire condition: 95 %, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), empty load weight: 6,400 kg, total height: 2,200 mm, Equipment: cabin, full service history, lighting, pallet forks, sideshift, trailer coupling, For sale: Used Toyota electric forklift, type 8FBMT 35, year 2018, with triplex free lift mast! Overall height: 2.2 m Lift height: 4.7 m Load capacity: 3,500 kg Dsdpfx Akjxzr E Eekeuw Solid rubber tires, 95% Hydraulic sideshift Fork length: 115 cm Includes charger Both drive motors and the rear axle have already been overhauled on the forklift, and the battery has also been replaced! Forklift is immediately available! Forklift is ready for immediate use! Forklift can be inspected and test-driven at our premises! Transport can be organized on request!

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Duedpfjvl Skajx Akkow Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2000 bar Working hours: 7397 h

Year of construction: 1989, operating hours: 24,048 h, condition: good (used), machine/vehicle number: DS 85 777, Brand Hans Weber Maschinenfabrik GmbH Type DS 8.7 Dedpfevuzqzsx Akksuw Serial number DS 85 777 Type Screw Double screw Year of manufacturing 1989 Working hours 24.048 H Screw diameter 87 mm Connection Load 90 kW

Condition: used, Year of construction: 2006, System: Used Amphibious Suction Dredger, Amphibious Vehicle for Water & Land Model: Conver C 580 H Amphibious Boat Year of Manufacture: 2006 Application: This machine is specifically designed for combined use on water and land, making it ideal for desludging, cleaning, and dredging operations in bodies of water and hard-to-reach wet areas. - Desludging of lakes, ponds, and canals Dujdpfx Aey Dz H Tjkkew - Work in port facilities and shoreline zones - Suction of sludge, sediments, and sand - Maintenance and cleaning of waterways - Municipal and industrial applications Serial Number: 501 Own Weight: approx. 2,750 kg Draft: approx. 0.85 m Freeboard: approx. 0.50 m Ground Clearance: approx. 0.30 m Speed: approx. 7 km/h (water) / up to 15 km/h (land) Dimensions: Length (transport) approx. 3.60 m, Width approx. 1.80 m, Height approx. 1.10 m (+ tracks) Working dimensions: Length approx. 4.20 m, Width approx. 2.60 m, Height variable min. approx. 1.50 m Drive and Engine: Hatz diesel engine Output: 48 kW (65 HP) at 2,300 rpm, air-cooled Water drive: 2 hydraulically driven propellers (twin-screw) Land drive: 6x wheel motors (Danfoss), 6x wheels, additional rubber tracks for difficult terrain Hydraulic System: 2 x Sauer pumps (each max. approx. 120 l/min), Danfoss proportional valves, additional VCD valves for various functions Hydraulic tank: approx. 200 liters Equipment: - Heavy duty boom (2-part 1..50+) - Aluminum pontoons: hydraulically adjustable, extra wide - Pontoon adjustment: hydraulic - Double cutting device (including knives and chains) - Crop collection frame: approx. 2.00 m with spring tines - Sludge blade: hydraulically adjustable - Sludge dredge pump: incl. spray nozzle - Support legs: hydraulically adjustable for dredging operations - Comfort seat: swiveling - Steering wheel: adjustable - Dashboard: with display instruments Pump technology: Speed approx. 1,600 rpm, pump pressure: approx. 30 mWC, capacity: 44-74 kW Special features: Fully-fledged amphibious vehicle for water & land, operates in accordance with regulations for public waters, environmentally friendly design, highly versatile. Condition: used, functional, age- and use-related wear Inspection: possible by appointment Other: Subject to errors, changes, and prior sale.

Year of construction: 2000, condition: good (used), For sale: Horizontal flow packer + infeed conveyor from Dekapack Dsdjwtq I Eepfx Akkjuw Model: S4 - 35 / 2 Control: Siemens S7 Documentation & electrical diagrams available. The machine is complete. Everything included as shown in the photos Transport upon agreement. Price: €5000,- EXW If you have any questions or remarks, please let us know! Best regards, Leo Holland

Condition: not inspected (used), 3 pad printing machines with comprehensive accessories for sale Three pad printing machines are available for sale, all in perfect working condition. The machines only need to be adjusted to your specific printing templates. The package also includes: - At least 200 new, unused printing pads - New, etched printing plates (unused) - Additional accessories All machines operate flawlessly and are ready for immediate use once set up for the respective templates. Ideally, I would prefer to sell everything together as a complete package. Regarding the value of the pads: Dodpfsyrut Ujx Akkouw A single printing pad costs approximately €35–45 each, depending on the model, so the stock of pads alone represents a value of several thousand euros. If you are interested or have any questions, feel free to contact me. Videos of all three machines are also available! Just make me an offer.