Rotary valve 1.5 kW 37 rpm

Tecom Modena PST 28 D 8 flügelig

Condition: used, (14) Unused Man UPB 12-L-W-E3262E302 CHP cogeneration units with capacity 130kWel and 226 kWTh made in 2022 and designed to be fed by wood gas. Project was dropped so the equipment was never installed or commissioned. Plant includes the following major equipment: - Man 12 cylinder engine rated 273 kW, 50Hz, 1500 RPM - Marelli MBX-E 250 MA4 generator rated 169 kVA, 400V, 50Hz, 1500 RPM - AFR Air-Fuel Ratio control system by Motortech - Generator control system by ComAp Ndedpfxjyhc T Ij Almea (14) units available.

Year of construction: 2001, condition: excellent (used), Single screw extruder WEBER NE5 1-30:D with 2 co-extr. WEBER ZE30 Year of construction 2001 Screw diameter 50 mm Application:PE-PP, Three-layer pipes or pipes with colored stripes The plant has manufactured heating pipes Condition: very good 2 Co-Extruders WEBER ZE30 Screw diameter 30mm The three-layer pipe system is my property Ndjdpfjhy Tp Djx Almea Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Condition: new, Year of construction: 2026, Motor power: 7.5 kW - Cutting force: 30 tons Cutting channel designed for: - Maximum roll length: 1500 mm Ndedoltmi Sspfx Almja - Maximum roll diameter: 1250 mm - Machine weight: approximately 3800 kg - Tank capacity: approximately 110 liters - Hand protection grille in the area of the control panel and on the opposite side - Knife locking mechanism - Straight design slitter table - Documentation: 2 copies in German (1 printed, 1 on USB) - Color: RAL 5012 - light blue Protective grille/knife beam: RAL 1028 - melon yellow Machine in stock, immediately available Price and further information upon request.

Year of construction: 2016, condition: new, 1 unit of a completely overhauled, unused industrial bevel-helical gearbox from ASUG. TGL 21815. All gearbox parts have been replaced, with the exception of the housing!!! Clutch: 800 mm (only one half available) Maximum torque: 27,829 Nm Nsdpfx Alsgwlrdsmsda Gear ratio: i = 1:80 Maximum power: 51 kW Oil capacity: 170 kg Speed: n1 = 1400 Speed: n2 = 17.5 Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Overall height h2: 925 mm Length of base: 1170 mm !! The gearbox does not have an oil cooler !!

Year of construction: 2008, condition: ready for operation (used), A large-format single-shaft shredder Vecoplan is available. Rotor diameter: 370mm, effective rotor length: 1300mm, speed: 120rpm, knife rows: 37, knife dimensions X/Y: 40mm/40mm, feed opening X/Y: 1400mm/1300mm, hopper volume: approx. 3m³. Machine dimensions X/Y/Z: 3200mm/2400mm/1500mm, weight: approx. 5500kg. An on-site inspection is possible. Ndsdpfx Alsyddyzjmoa

Year of construction: 2022, condition: new, Complete solution for transporting bulk goods such as wood chips, wood pellets, shredded goods, granulate, etc. Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 4,000mm (customizable) Angle in the bend freely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, ​​felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x30mm T-40 lugs - 300mm pitch 2-layer particularly laterally stable We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Our core competence lies in supplying the customer with exactly what he really needs. Ndjdpfoilg U Esx Almoa Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: good (used), Year of construction: 2005, functionality: fully functional, cooling capacity: 350 kW (475.87 HP), type of input current: three-phase, overall weight: 1,930 kg, input voltage: 400 V, total width: 1,200 mm, total length: 3,600 mm, total height: 2,000 mm, AMMONIA CHILLER GEA GRASSO 350 KW Brand: GEA Cooling capacity: 350 kW Refrigerant circuit: 1 pcs. Type of refrigerant: R717 Year of manufacture: 2005 Compressors: 1 pcs. reciprocating GRASSO Heat exchanger: Shell and tube Dimensions: 3.60 x 1.20 x 2.00 m Weight: 1930 kg Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Nodpfx Alsim R A Ismeda Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2026, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. Nsdpfxjq Nf Uwe Almsda When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: excellent (used), Automatic filling system Logdos Späth GmbH Type K-DOS.F/AL 40/EX for filling liquids into buckets, jerricans, IBCs and drums ATEX-protected Ndjdpfxeiyytqj Almsa mobile, can be moved on rollers compact dimensions: 3m x 2m x 2m (L x W x H) Programmable X/Y axis and palletizing Very good condition, directly from production!!!

Year of construction: 2023, condition: new, Due to overproduction, 9 units are available. Dimensions: approx. 3000 x 300 x 105 mm Aluminum construction: Conveyor belt width without wave edge Smooth PVC conveyor belt Green conveyor belt, 2-layer, particularly resistant to transverse forces, endlessly welded with a stepped joint * antistatic due to threads in the fabric of the running side Drive: motor approx. 0.18 kW, speed 0.3 m/sec. * speed controllable with a frequency inverter Connection 220/400V, 50Hz, protection class IP54 Nedpfx Asff Hgajlmeda Drive and motor control optionally available.