CNC lathe

Takamaz XYT-51

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm Fodpfx Agohzbipe Dopd DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: good (used), turning length: 6,000 mm, spindle bore: 260 mm, Swing over bed Ø: 850mm Swing over cross slide Ø:500mm Fpsdpfxowvtg Ae Ag Ded DBC Turning Length: 6000mm Spindle bore: 260mm Spindle power: 28kW Bed width: 650mm Stroke pinole: 300mm Spindle taper: 6Mk Workpiece weight: 5000 Length: 10000mm Width: 2100mm Height: 2600mm Weight: 12800kg

Condition: like new (used), Year of construction: 2019, operating hours: 1,256 h, functionality: fully functional, machine/vehicle number: HTS.XD.26.A1.0133, Machine Name - Dugard Hanwha Machine Model - XD26H S.N A1.0133 Y.OM 2019 Fodpfx Agswxl Rlo Djpd Description - Fanuc i Series control Max Turning diameter 26mm 8000 RPM main and sub spindle Upto 20 tools can be used LNS Alpha 312 Barfeed

Condition: used, Thread rolling machine ORT RP30U 2-roll 30 ton Fjdpfxjt H Ty Us Ag Dopd swiveling heads variable speed drive #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior Power (Ton): 30 Number of rollers: 2

Year of construction: 1980, condition: good (used), A used very well preserved cycle controlled lathe from Weisser Heilbronn with SIEMENS control. centre distance 2000 mm centre height 295 mm Swing over bed 600 mm Swing over cross slide 260 mm Swing diameter in the bend 800 mm Total length of the crank 375 mm Bed width 450 mm Plan travel X-axis 350 mm Longitudinal travel Z-axis 1850 mm Spindle nose DIN 55022 size 8 Spindle speed Number 18 14 - 1400 rpm spindle bore 71,5 mm Fpjdpfxsgyy I Ae Ag Dod Diameter of front bearing 110 mm feed range 0,01 - 40,95 mm/rev rapid traverse 8 m/min Direct current drive 15 kW 400V 50Hz Max. permissible torque at the spindle 2500 Nm Tailstock quill 80 mm quill stroke 250 mm inner taper quill MK 5 Length x width x height Weight of the machine 5500 kg Accessories Tailstock Pneumatic three-jaw chuck with interchangeable jaws 315mm Quick change holder "MULTIFIX "in front of the center size "C Quadruple turret behind the center Tool holder Coolant device Pneumatic steady rest Technical data and dimensions: Errors excepted. Videoconference via whatsapp possible by appointment

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning length: 1,275 mm, turning diameter: 481 mm, spindle motor power: 26 W, spindle speed (min.): 20 rpm, spindle speed (max.): 2,800 rpm, spindle bore: 102 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, total height: 2,110 mm, total length: 4,636 mm, total width: 2,035 mm, spindle nose: ASA 11, overall weight: 6,900 kg, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​2-axis CNC lathe "DOOSAN model PUMA GT3100L" complete with chip conveyor. Fpsdpjx N R E Aefx Ag Dsd

Condition: new, Year of construction: 2020, operating hours: 1 h, SWISS KRONO Kft. offers the CNC drilling and milling machine MW2131KS Masterwood. As an attachment we are attaching the description of the machines as well as further pictures and information in a shared folder. SWISS KRONO Kft. bietet die CNC-Bohr- und Fräsmaschine MW2131KS von Masterwood an. Fpsdpfjrxubwsx Ag Djd Als Anhang fügen wir die Beschreibung der Maschinen sowie weitere Bilder bei und Informationen in einem freigegebenen Ordner.

Condition: used, Year of construction: 2022, INDEX - C200 - 2022 Fsdpfx Aoyl Nnasg Depd - less used condition as shown on photos - under power, can be tested

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 1,800 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 3,250 mm, spindle motor power: 75,000 W, overall weight: 21,500 kg, number of axes: 3, This 3s DOOSAN PUMA 600LM was manufactured in 2007. It features a 45° inclined cast-iron bed and prismatic guideways with Rulon 142 antifriction material. The spindle offers a speed range of 15 – 1,800 rpm and a maximum torque of 9,025 Nm. With a bar capacity of 152 mm and continuous C-axis rotation, consider the opportunity to buy this DOOSAN PUMA 600LM horizontal turning machine. Contact us for further details. • Guideways: Prismatic with Rulon 142 antifriction material • Spindle: • Nose: ASA A2-15 • Maximum torque: 7,220 / 9,025 Nm • Bar capacity: 152 mm • C-axis: continuous interpolated, 0.001° resolution • Axes: • Number of axes: 3 (X, Z, C) Fsdpfx Agsyi Uwbj Djpd • C-axis rotation: ±360° continuous • Feeds: • Rapid feed X-axis: 12 m/min • Rapid feed Z-axis: 10 m/min • Maximum interpolated feed: 500 mm/rev • Ball screws diameter: Ø 50 / 63 mm

Condition: used, Year of construction: 2017, functionality: fully functional, Equipment: documentation/manual, Index ABC Lathe with IRCO ILS MUK 7012-II Bar Loader, including Knoll coolant system, chip conveyor, and extraction unit Year of manufacture Index ABC: 2017 Year of manufacture Knoll coolant system: 2017 Year of manufacture Knoll chip conveyor: 2017 IRCO ILS MUK-II bar loader: 2015 Control: Fanuc Series 32i-Model B Condition: used Availability: immediately Price: negotiable Technical data: Spindle bore: Ø42 mm Number of turrets: 2 (1 upper, 1 lower) Fixed tool holders: 3 Number of tool positions on lower turret: 6 Fedex E Spnspfx Ag Dopd Number of driven tool positions on lower turret: 0 Number of tool positions on upper turret: 8 Number of driven tool positions on upper turret: 8 Weight: Index ABC including coolant system and extraction approx. 3,500 kg Space requirements: Machine approx. 2.83 m (L) x 1.5 m (W) x 2.2 m (H) Chip conveyor approx. 1.6 m (L) x 1.25 m (W) x 1.78 m (H) Bar loader approx. 1.8 m (L) x 1.0 m (W) x 1.28 m (H) Complete machine with Breuning IRCO ILS MUK 7012-II bar loader, coolant system, chip conveyor, and extraction unit. Power supply Index ABC: 400V/50Hz Current Index ABC: 63A Rated power Index ABC: 37 kW Connected load Index ABC: 44 kVA Power supply IRCO ILS: 400V/50Hz Rated power IRCO ILS: 1 kW Accessories: Chip conveyor and chip container Complete machine documentation (operating manuals, circuit diagrams) Additional technical data available on request.