Tool holder / tool holder

system 3R 3R-901-20

Condition: ready for operation (used), Year of construction: 2011, Travel X/Y/Z: 1000mm/500mm/635mm, tool holder: BT40, spindle speed: 10000rpm, tool positions: 40, control: Haas, spindle hours: approx. 4500h. 3-axis robot System 3R WorkPartner, year of manufacture: 2005, transfer weight: 80kg, stroke: 1500mm, pallet positions: 20. Including System 3R GPS 240 zero-point clamping system, tool measurement, tool breakage control, Renishaw 3D probe, and oil mist extraction. Documentation available. An on-site inspection is possible. Blsdpfxsxg Rias Akaog

Condition: used, Year of construction: 2005, control HEIDENHAIN - iTNC 530 number of spindle speeds 18.000 U/min tool taper HSK-A63 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & pallet changer. The machine is in a well-maintained condition and can be inspected under power at any time in the Swiss factory location. A machine video from the production plant will be shared on request. Blodpfjyy A Nuex Akajg Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch Bledpfsylw Stsx Akasg • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40

Condition: excellent (used), Sunnen GH210 Horizontal Hone Year 2010 Max Stroke 8000mm, Spindle Speed:0 - 300 rpm Maximum Spindle Power: 40 Hp (29.83 kW) Maximum Stroker Power: 18 Hp (13.42 kW) Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) I.D. Range: 2 – 24 inches (50.8 – 609.6 mm) O.D. Range: 26 inches standard (660.4 mm) Blsdpfx Asw U Uh Djkaeg Maximum Part Weight: 8000 kg Approximate Machine Weight: 12,066 kg 400 VAC 50 Hz, 3-Phase (85 A) Siemens Simatic Control,

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Scanning Electron Microscope (SEM) Zeiss XB 350 Configuration and Accessories • Without FIB Column • SmartSEM- and SmartFIB-Software • GIS with Pt Precursor • Integrated Plasma Cleaner • EDS Oxford Xplore 30 (incl. Interface & Software) Bljdpfxew Rdvvj Akaeg • Automatically 200 mm Air Lock • Electrical Feed-Through (2 x 15 Channels) • Circulation Cooling • Vacuum Buffer Tank (Quiet Mode) • ... and Table, Screen, Control Panel (i.e. Unique Zeiss Keyboard + Joystick) and Misc. Probe Holders Launch: August 2024 Site: Germany, Mainz Available at short notice by arrangement. The SEM is still in operation and can be viewed and demonstrated. The device has no defects or quirks and is fully functional. Further information available on request!

Condition: ready for operation (used), Year of construction: 2012, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 4, This 4-axis Mazak VTC 800/30SR was manufactured in 2012. It features a high-pressure coolant system at 15 bar, a 48-tool magazine, and dual auto tool length measurement units. Equipped with Siemens software, a Visiport, and an RMP60 probe, it's ideal for precise vertical machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information. • High-pressure coolant (15 bar) • Auto tool length measurement x 2 units • Visiport • 19" screen • Siemens software P • Signal tower • Additional work light • RMP60 probe • Bracket for NCRT for vertical use • Table centre partition • 48-tool magazine Additional equipment Bodpfxjx D I A Se Akaolg • Consep 2000 (chip conveyor/coolant system) for 15 bar, left-hand discharge

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Bledsxl R Hvspfx Akaeg Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ±360° Maximum workpiece dimensions 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) 5-axis machining is possible in a single setup with a 300 mm long tool (A-axis at 90° swivel). Machine operating hours: approx. 82,500 h Total spindle hours: approx. 36,500 h Clamping table No machine table is included in the delivery. However, we are happy to offer a customer-specific solution at extra cost. 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Tool holder: HSK 63A Tool release: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drives, linear axes Feed rate X, Y, and Z axis: up to 65 m/min Axis acceleration X, Y, and Z: up to 5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Power requirement: 130 kW Dimensions, weight Space required machine without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-fold tool changer - Work area enclosure Optionally available at extra cost: - Renishaw RMP60 probe - BLUM LaserControl NT mini Condition of the machine Fully functional, in very good condition. Can be inspected under power until April 2026.

Condition: good (used), Year of construction: 2006, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 813 mm, overall weight: 13,611 kg, table length: 1,626 mm, table width: 914 mm, controller model: HAAS, nominal power (apparent): 22 kVA, rotary table diameter: 760 mm, spindle speed (max.): 6,000 rpm, table load: 4,536 kg, Equipment: chip conveyor, IBN 03/2006 Blodpfxevgmr Io Akasg IKZ 70 bar (TSC 1000) WZW 30-fold (BT50) Full 4th axis Spindle & gearbox new in 2017 1-shift operation Machine can be inspected under power !!!! free loading until CW04/2025 !!!! (with same-day delivery of our new machine)

Condition: ready for operation (used), Year of construction: 2008, Make: MAZAK Type of machine: INTEGREX 300-4ST Year of manufacture: 2008 Control system: Mazatrol Matrix Machine's weight: 13.900 kg Tool holder: Capto C6 x-travel: 530 mm y-travel: 200 mm z-travel: 1.065 mm Speed range: 4.000 U/min Cutting diameter: 300 mm Bjdsyh I Tdepfx Akaslg Turning length: 1.000 mm Overall dimensions: 6.500 × 3.000 × 3.200 mm Tool turret - slots: 80 Pl.

Condition: excellent (used), Year of construction: 2000, Nominal diameter: 4,500 mm Swing diameter over bed: 820 mm Bodjyk R Dyopfx Akaelg Swing diameter over steady rest carriage: 650 mm Spindle bore: 115 mm Main spindle drive power: 40 kW Milling spindle drive power: 25 kW Milling spindle tool holder: HSK 100 Tool changer: 3 x 30 positions Control: SINUMERIK 840 C Including chip conveyor Including documentation Machine is under power and will be available in approximately 2 weeks!