Mechanization

Swedabo THx1

Condition: used, Number of boring spindles 5 St. Working width 230 mm Working height 160 mm Hedpfxsrmvhfs Afnsnh

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m Hnedpfofg E Hljx Afnsh ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, with planing spindle Hnsdpfxsd H Sc Eo Afnjh Type R-R-RP1300 Working width 1300 mm Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Condition: excellent (used), Technical data: Max planing width: 400 mm Max planing height: 240 mm Knife shaft diameter: 120 mm Number of knives: 4 Hnedpov Rv Dbefx Afneh Feed speed: 6-12 m/min Manual lifting Extraction port: 110 mm Power supply: 400 V Motor power: 10 kW Overall dimensions: Length: 2200 mm Width: 860 mm Height: 1250 mm

Condition: good (used), Year of construction: 1991, Braun Canali band resaw TB 1100 Unimaster Hnjdpfxeucnt Ho Afnsh Roller diameter 1100mm With swivel table for diagonal cut disassembled from our warehouse in 23936 Grevesmühlen

Condition: good (used), Year of construction: 1990, RANDEK SP700 cut saw manufacture Randek Sweden Hjdpfxoh Ayyqo Afnonh Year 1990 in good condition Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting roller conveyor system with 5 adjusteable pneumatic stoppers . Lenght 6,25m outfeeding roller conveyor 4,10m Complete line: 11,5m technical inforamtion under subjet of correction

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine - Strip magazine not for sale - Package cross conveyor Hnjdpfewclkysx Afnjh The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.

Condition: new, Year of construction: 2023, OMC PL 105 LC 30/13 Water-based veneering press Working surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Hnsdpfx Afoiypzlonoh Maximum heating temperature of 85 degrees Control system logic contorl Machine control from touch panel readouts Temperature, pressure force, shelf opening time, loading area calculator, glue process programming Power 21KW CE certificate Production 2023 Machine available on request New machine

Condition: excellent (used), functionality: fully functional, Brief description Hodpsxvx Ezefx Afnenh Table dimensions: 3000 mm x 1300 mm Number of cylinders: 6 Pressing force: 90 tons Table opening: 400 mm Heating with hot water Boiler: 20,000 kcal/h

Year of construction: 2001, operating hours: 123 h, condition: ready for operation (used), machine/vehicle number: 123, Metal silo for storage of woodchips, etc. Technical description: silo DM: 5m Height: 8 m with outfeeding unit (screw conveyor connection to output) Hnsdpfxeftdv Ue Afnsh Cappacity: 42 m3 With outfeeding transport screw conveyor to the top of the silo building. Already dismountled, visit possible by appointment at our warehouse H-2013 Pomáz/Hungary.