Cylindrical Grinding Machine - Universal

STUDER S 40-3

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s Lrjdpfxsvc Ax No Aiger ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: used, Dicer Lrodpfxjqlbzvo Aigjr Rühle Type: SR 1 Dimensions: 90x50x90cm Electrical power: 1.5kW

Condition: excellent (used), control: Heidenhain Positip 850; tool taper: SK 40; hydr. clamping; Ljdpfjlkgvbex Aigorr stroke: 100 mm; table: 800x480 mm travel: x-600 mm, y-400 mm, z-400 mm rapid motion feed: 63-800 mm/min (18 steps) spindle speed: 63-3150 rpm (18 steps) accessories: coolant equipment, collet chuck incl chucks

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN 530, workpiece length (max.): 1,250 mm, workpiece width (max.): 850 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 1,200 kg, table width: 850 mm, table height: 640 mm, table length: 1,250 mm, spindle speed (max.): 18,000 rpm, distance table to spindle center: 700 mm, number of slots in tool magazine: 60, Equipment: chip conveyor, rotational speed infinitely variable, DECKEL MAHO DMC 100V Machine after complete rebuild. Spindle overhauled and bearings replaced. Tool measurement laser: BLUM Due to company restructuring, we have for sale: HIGH-SPEED 3-AXIS MACHINING CENTER Manufacturer: DECKEL MAHO Model: DMC 100V LINEAR Control: HEIDENHAIN 530 Year of manufacture: 2003 Table size: 1250x800 mm Travel: X 1000, Y 800, Z 500 mm Workpiece weight: max. 1200 kg Major machine overhaul: 06.2025 Lsdpex Elxiefx Aigjrr Spindle: HSK 63A 18000 rpm Power S1/S2: 15kW/19kW Torque S6 40%ED: 130Nm Tool changer: 60 positions Workpiece probe: HEIDENHAIN Tool probe: BLUM laser Chip conveyor Internal coolant supply (IKZ) Machine in very good condition, after complete overhaul. Regularly serviced. Machine is in continuous operation.

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Ledpfjtqf Rzsx Aigjrr Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: used, TOS BHU 50×2000 – USED UNIVERSAL CYLINDRICAL GRINDER A used TOS BHU 50 universal cylindrical grinder, center distance 2,000 mm, from a company liquidation. Inspection on-site or via video call is possible at any time. The following technical data are taken from the machine-specific TOS-BHU-50 data sheet and serve as a technical reference. Binding values for this individual machine will be determined after inspection. KEY FEATURES - Automatic program for longitudinal, transverse, and plunge grinding, external and internal - Precision standard IT class 5 - Spindles on hydrodynamic bearings with automatic bearing adjustment - Infinitely variable workpiece spindle speed, swivel headstock on both sides - Swiveling grinding wheel head TECHNICAL DATA (BHU 50 SERIES) - Grinding diameter: 500 mm - Center distance: 2,000 mm - Center height: 250 mm - Grinding wheel (Ø x width x bore): 500 x 80 x 203 mm - Diameter of worn grinding wheel: 380 mm - Diameter of workpiece in open/closed steady rest: 110 mm - Diameter of chuck: 200 mm - Taper in workpiece spindle and tailstock spindle: MK 5 - Swivel range of workpiece spindle headstock: 90°, grinding wheel headstock: ±45° - Largest longitudinal travel of the table (at 2,000 mm center distance): 2,290 mm - Table speed, infinitely variable: 0.05-5 m/min - Grinding spindle speed: 1,230 / 1,470 rpm - Workpiece spindle speeds: 16 steps, range 12-400 rpm - Grinding wheel headstock motor: 7.5 kW - Total power consumption: 16 kVA - Machine weight (at 2,000 mm center distance): approx. 6,600 kg - Largest workpiece weight: 300 kg between centers, 300 kg cantilevered STANDARD EQUIPMENT (SERIES) - Grinding wheel 500 x 80 x 203 mm for 33 m/s circumferential speed, flange, and guard - Dressing and mounting device for the grinding wheel flange, balancing mandrel - 2 fixed centers MK 5, 2 open steady rests (Ø 10-110 mm) - Sedimentation coolant system, splash guard - Micrometric dressing device for the grinding wheel (tailstock) - Driver and operating key set, machine lamp, technical documentation We would be happy to clarify in advance whether the specific machine has the full range of features based on its actual equipment. Ljdpozi Strsfx Aigerr CONDITION Used machine from a company liquidation. Sold "as is, where is," warranty excluded. On-site inspection or video call inspection is highly recommended; independent functional and accuracy testing is available upon request. A general overhaul is possible upon request and for an additional charge. OUR SERVICE Online or on-site factory inspection, transport can be organized upon request, installation, commissioning, and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of FDM, the German Association of Machine and Tool Wholesale. As this is an individual machine, availability is subject to prior sale. Please call or write to us briefly, and we will arrange an inspection appointment as soon as possible.

Condition: excellent (used), Year of construction: 1997, Romanian Lathe SARO SPS 1250x9000, Manufacturer: Saro Targoviste, Year of Manufacture: 1997. Chuck diameter: 1250 mm, Maximum swing over bed: 1250 mm, Spindle diameter: 250 mm, Distance between centers: 9000 mm, Maximum swing over slide: 920 mm, Maximum workpiece weight between centers: 15,000 kg. Grinding attachment available! Video of the machine under power available. Weight approximately 25 tons. Lrjdpfxey Icbaj Aigjr

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : WMW - GLAUCHAU Hydraulic Internal Grinding Machine with Face Grinding Device model SI 6/1 AS-N x 315 year 1991 Internal grinding diameter 40 - 400 mm Lodpfxexyllvs Aigjrr Internal Grinding depth, max. 315 mm Max. grindable External dia. 400 mm Weight of workpiece without steady, max. 630 kg Workpiece Swing Ø, with / without safety hood, max. 500 / 600 mm Height of centre above table 360 mm 16 step workpiece spindle speeds 40 – 400 rpm Workpiece spindle bore, approx. 53 mm Workpiece headstock swivelling max. 30 ° Adjustment of workpiece headstock position crosswise, max. 400 mm Automatic cross traverse of grinding head 70 mm Adjustment of grinding head position on slide crosswise, approx. 100 mm Feed of grinding head, intemittendly 0.001 – 0.025 mm/stroke Feed of grinding head, continually 0,1 – 1 mm/min Table stroke, max. 630 mm Table speeds infinitely variable 0,1 – 8 m/min (10 m/min) Distance workpiece headstock and grinding slide, max. 1,250 mm Adjustment of Grinding spindel stock on table 520 mm Spindle drive, approx. 7.5 kW Total electrical load, approx. 17 kW - 380 V - 50 Hz Weight, approx. 6,000 kg Accessories / Special Features: • Universal internal grinding spindle head with automatic cycles to grind cylindrical and conical bores with one or multiple diameters, external diameters and grinding of narrow end-faces. • Face grinding device, hydraulic swivel-in, with automatic cycles to grind end-faces, multiple end-faces and two tiered end-faces simultaneously • Electronic cycle control with control tableau to set up all the grinding and dressing cycles including ampere-meters for internal grinding spindle and face grinding spindle • Belt-type grinding spindle drive with mounted grinding spindle and 5 pieces separate interchangeable grinding spindles along with various pulleys with various diameters. • Dressing device for both grinding spindles • HEIDENHAIN Digital Read-Out for the cross adjustment of the Workpiece headstock • A large amount of operating tooling and accessories as : 4-jaw Faceplate Ø approx. 520 mm, 3-jaw chuck Ø approx. 380 mm, 3-jaw-chuck Ø approx. 130 mm, pulleys, spindle sleeves, grinding flanges, foot switch, • Separate hydraulic unit, built on switch cabinet, coolant device with magnetic separator. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: good (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 3,000 mm, - CNC control Heidenhain TNC 415B - controlled 2-axes NC-milling head 2,5° - coolant device The machine will be sold without the plate field Accessories: ca. 20 pieces tool tapers DIN 2080 with bolts DIN 69872 some spare parts like bevel gears for the milling head and ball screw for X-axis. Technische Daten / technical details: Verfahrweg X längs / X-travel longitudinal 10000 mm Verfahrweg Y quer / Y-travel cross 1500 mm Verfahrweg Z vertikal / Z-travel vertical 3000 mm Werkzeugschaft / spindle taper SK50 Drehzahlbereich (2-stufig) / spindle speed (2-steps) 35-3000 UpM /rpm Vorschub / infeed 6-10000 mm/min Eilgang X,Y,Z / rapid feed X,Y,Z 10, 15, 10 m/min Antriebsleistung Hauptmotor 100%ED / drive capacity main motor 100%ED 37 kW Gewicht der Maschine ca. / weight 39300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Ljdewrzkzspfx Aigsrr

Condition: used, Year of construction: 1993, Name: Industrial decanter Manufacturer: Alfa Laval NX 4045 Type: 919B-31G Year built: 1993 Max. bowl speed: 3250 1 / rpm Material: Edelstahl Stainless Steel Driving force: 18,5 / 21 kW Inner diameter drum: 353 / 198 Interior drum length: 1200 mm Permissible sediment density: 1,2 kg / dm3 Dimensions: Length 3000 x width 1000 x height 1150 mm Empty weight: 2500 kg Technical doc.: Yes Message: Eddy current brake Accessories: A control cabinet Condition: Second hand Price: On demand Lrsdpfxswid Nhe Aigsr