Cylindrical grinding machine

STUDER RHU 750

Condition: good (used), Year of construction: 1970, Grinding diameter Ø 250 mm grinding length 750 mm grinding wheel size 400 x 50 mm kW Power at the spindle 3 kW DIMENSION Gbsdpshbafwsfx Acwjk length 2400 mm width 1300 mm height 1500 mm

Condition: used, Year of construction: 2012, grinding length 1000 mm grinding width 600 mm workpiece height 400 mm table-size 1.100 x 500 mm max. table load 1.000 kg dist. center of grinding spindle - table 600 mm table travel longitudinal 1400 mm table travel cross 550 mm table feed 1 - 30 m/min turning speed range - grinding wheel 1.000 - 3.000 U/min power capacity - grinding motor 11,0 kW Gbodjya Ihhspfx Acwjk grinding wheel size 400 x 80 x 127 mm magnetic clamping plate 1000 x 500 mm dressing device Tischabrichter voltage 400 V total power requirement 21 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 4,30 x 2,95 x 2,55 m band filter unit 1,80 x 1,30 x 0,80 m hydraulic power unit 0,90 x 0,75 x 0,95 m suction device 1,10 x 0,60 x 0,70 m - Serial-No.: Spindle ON: 11.742 hours - autom. vertical feed - table dresser with compensation - electr. hand wheel - paper band filter unit with magn. separator - coolant mist extraction unit

Condition: ready for operation (used), Year of construction: 2015, A lightly used Clayton quick steam generator including water treatment in container design is available. Operating overpressure: 10bar, operating temperature: 184°C, pressure vessel volume: 235l, heating surface: 27.5m², steam capacity: 1253kg/h, output: 786kW, test pressure: 15bar, fuel: natural gas H, fuel heating value: 33200kJ/Nm³, burner output min./max.: 281kW/843kW, max. gas pressure regulator/burner: 40mbar/25mbar, nominal gas flow: 91.4Nm³/h. Overall system dimensions X/Y/Z: approx. 6300mm/2450mm/3000mm, weight: approx. 6000kg, operating hours: under 4000h. The system was tested at the end of 2023 and in mid 2024. Documentation available. On-site inspection is possible. Gedpfx Asx Srphecwjbk

Condition: excellent (used), Year of construction: 2017, operating hours: 5,000 h, functionality: fully functional, Controller HAAS Table size D500 mm Table load 300 kgs X travel 762 mm Y travel 508 mm Z travel 508 mm B swivel +120 - 35 degree C rotation 0,001 - 360 degree Distance between spindle end and table surface 102 - 610 mm Max. spindle speed 8100 rpm Max torque 122.0 Nm at 2000 rpm Spindle power 22,4 kW Spindle drive system Inline Direct-Drive Tool holder SK40 ATC magazin 30+1-fold Max. tool dia (next to each other) D64 mm Max. tool dia (neighboard places empty) D127 mm Max. tool length 305 mm Max. tool weight 5.4 kgs Weight 6500 kgs Dimensions LxWxH = 4420 x 2340 x 2540 mm Features, accessories Gbsdsxva Ahepfx Acwek - Coolant unit - High pressure pump (CTS) - Chip conveyor - RENISHAW tool presetter - RENISHAW zero point presetter - Manuals The machine is still in production in Hungary and can be inspected in operation. It was purchsed as new. Ready to buy immediately.

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 180 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 2.2 [kW] Gbjdpfx Ajuha Slecwok - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 1.5 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 9 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] - X/Y stroke : 50/325 [mm] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 4 POWER SUPPLY - Supply voltage : 400 [V] MACHINE HOURS - Number of hours under power : 31902 [h] - Number of spindle hours : 12146 [h] EQUIPMENT - CNC : Fanuc 32-iB - Interface : USB - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor - Coolant tank * with high-pressure pump * with paper filtering unit - Bar loader : IEMCA 338-HD - Cooling unit - Electric transformer - Number of turning tool holders : 3

Year of construction: 2019, condition: ready for operation (used), A simultaneous turning center Spinner with three turrets and extensive accessories, spare parts and tools is available. Travel X1/X2/X3: 180mm, travel Y1/Y2: +/-45mm, travel Z1/Z3: 704mm, travel Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: Speed: 5000rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: Speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turret 1/2/3: Turret stations: 3x12, speed: 8000rpm, tool holder: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27102h, control: Fanuc 31i. Including loading magazine Top Automazioni, cooling/high pressure system with 80bar, chip conveyor, fire extinguishing system, a comprehensive tool package and other spare parts. Documentation available. On-site inspection is possible. Gjdpfxeua E Tro Acwobk

Condition: good (used), Distance between centers: 1000 mm Height of centers: 175 mm Grinding length: 500 mm Maximum grinding diameter: 300 mm Working wheel dimensions (OD x ID x W): 500 x 203 x 80/100 mm Internal Morse taper: 5 Working wheel motor power: 7.5 kW Total power: 17 kW Longitudinal travel of the carriage (X-axis): 267 mm Transverse travel of the carriage (Z-axis): 650 mm CNC brand: FANUC CNC model: 16-T Rotating range: +/- 8.5º Dimensions: 2600 mm x 2300 mm x 2100 mm Approximate weight: 4200 kg Gedpfx Acjtt Rawowjbk

Condition: good (used), Year of construction: 2000, machine/vehicle number: 13639, Control Heidenhain X-Way 1,200 mm Y-way 800 mm Z-way 500 mm Main spindle: Speed 16,000 rpm Drive power - main spindle 17 kW Spindle Tool holder Type HSK63 Spindle diameter in front. Bearing 70 mm Upgraded Tool changer Size: 100 Swing round table: Round table diameter 800 mm Swivel range A: -15 / + 97° Godpoinh Rqjfx Acwjbk rotatable C: 360° max. table load approx. 1,000 kg max. tool diameter 80 mm max. tool byway. with free neighbor box. 125 mm max. tool length 300 mm max. tool weight 8 kg Feeds: Rapid response ( X / Y / Z ) 30 m/min Total power requirement 31 kVA Machine weight 15 tons Space requirements approx. 6.0 x 5.0 x 3.6 m other equipment - Documentation - Chip conveyors - electronic heat compensation Y- + Z-axis

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, spindle diameter: 130 mm, travel distance W-axis: 800 mm, CNC Boring Mill TOS VARNSDORF Technical Specifications Brand: TOS VARNSDORF Model: WHN 130 CNC: Heidenhain ITNC 530 Year: 1999 / Fully Retrofitted 2014 X: 3500 mm Y: 2000 mm Z: 1250 mm Gbedpfx Acex Tfngjwok W: 800 mm PRICE AND FURTHER INFORMATION ON REQUEST (CNC, SIEMENS, HAAS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, Machining, PINACHO, MORI SEIKI, Milling Machine, Lathe, Grinding Machine, Boring Mill, Press, Laser, Shear, Press Brake)

Condition: ready for operation (used), Year of construction: 2021, General Data Machine weight 2500–2950 kg This 12-axis Citizen Cincom M16-4M8 was manufactured in 2021, featuring a robust configuration with up to 38 tools, including gang, turret, and back tool post options. It supports a rapid feed rate of 32 m/min, with specialized rates for X2, Y2, and B axes. The main spindle motor outputs 2.2/3.7 kW, ensuring efficient operations. Consider the opportunity to buy this Citizen Cincom M16-4M8 Swiss type turning machine. Contact us for more information about this machine. Application Types Gedpex D Nfuefx Acwsbk Turning