Diesel Forklift

STILL RX70-80/900 | Nur 2.025 Bst. | Kamerasys

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ----- Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically timed up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: pneumatically timed up-down glazing bead saw Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Can be used for glazing bead cutting or as a grooving machine Nodpexpn T Usfx Aqwsda > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with 99-program memory > Machine operation: Window package Joint control of the right spindle and the glazing bead feed via manual selector switch on the control panel > Spindles with mechanical digital display (Technical data according to the manufacturer - no guarantee!)

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 251 h, load capacity: 8,000 kg, lifting height: 4,490 mm, free lift: 1,550 mm, fuel type: electric, mast type: triplex, construction height: 2,900 mm, fork length: 2,400 mm, empty load weight: 16,850 kg, total length: 2,640 mm, drive type: Elektro, construction width: 2,140 mm, Electric 4-wheel forklift Nodpfxoxxdy No Aqwoda Load center: 900 Mast type: Triplex Condition: As good as new Technical condition: very good Front tires type: Non Marking Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Condition: 80 - 100% Battery Volt: 80V Battery year of construction: 2020 Sideshift, Fork positioner, 3rd valve, 4th valve, heating, STVZO, full cab, full free lift, CE certificate,

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, feed rate X-axis: 40 m/min, working width: 240 mm, planing height: 120 mm, spindle diameter: 40 mm, overall weight: 4,000 kg, power of feed motor: 4,000 W, We offer this very well-maintained SCM superset nt moulder and planer, year of manufacture 2022. Manufacturer: SCM Model: superset nt Year of manufacture: 2022 Condition: very good Category ID: 858 Type ID: 2293 Type: Moulder and Planer If you have any questions or need further information, please feel free to send us a message or call us. Ndodpfsyapi Hex Aqwja

Condition: excellent (used), Year of construction: 1994, Device description: grinding top/bottom working width 200mm electric adjustment of the upper unit star/delta start-up installed power 14kW Njdpewyb Ntofx Aqwsda pneumatic belt tensioning belt oscillation working height up to 150mm

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Throughfeed moulder ideal for companies working profiles for windows, doors, stairs, beads, frames and furnishings. Nedpfxey Hu Suo Aqwjda This machine was in display in showroom, fully functional, 0 (zero) working hours Packed and ready for loading within 3-5 days after order confirmation. Stored in warehouse in Croatia

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Technical data: Wood infeed length: 150–700 mm Wood width: 40–150 mm Wood thickness: 20–50 mm Press length: 6100 mm Pressing force: 120 kN / 12 t Milling spindle power: 15 kW Chipper power: 5.5 kW Glue application system: Flankenjet / Glue nozzle Performance: Tenoner – 2 bundles per minute Press – 2 cycles per minute Ndsdpfx Ajy N D A Usqwja

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: 10999, DESCRIPTION Double-sided grinding machine / grinding machine top/bottom Manufacturer Löwer Type DSM 3000 with workpiece return Bthgq0Ygu0 Working width: 290 mm Grinding thickness: 2-200 mm Shortest workpiece length: approx. 320 mm Equipped with: 1x grinding unit from above, 7.5 kW 1x brushing unit from above, 0.37 kW 1x grinding unit from below, 7.5 kW 1x brushing unit from below, 0.37 kW Grinding belt dimensions: 300 x 1800 mm Electric height adjustment, 0.37 kW Adjustable feed, 6/11/16 m/min. Compressed air: 6-8 bar Ndjdpfjv Dfp Hox Aqwea Dimensions approx. 2700 x 1100 x 1900 mm Weight approx. 1600 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Unicontrol 12 Consisting of: Cut-off unit (item A), Tenon and slotted spindle (item C), Transfer belt (Pos. I), profiling spindle (Pos L), profiling spindle (Pos. N), Profile shaving unit vertical right (Pos. P) For the production of individual parts and elements in frame-by-frame or serial production. Consisting of a cross processing unit and a longitudinal processing unit connected to a transfer belt. Working width 40-140mm (See pressure ruler left 40 - 140 mm) Working height 40-120mm Workpiece length min. approx. 275 mm + 1 x end profile length Long machining: approx. 220 mm + 2 x end profile length Workpiece length max. 3500 mm The part dimensions depend on the machine equipment, production type and tool assignment. A final definition of the part dimensions is only possible after receipt, inspection and approval of the complete and final layout drawings. Nedpoumci Sefx Aqwoda Cross machining: Table feed Motor power 0.3 kW (0.4 HP) Pre-set feed speed for cutting, profiling and return 3-25 m/min Vario table with (studio window production possible) The clamping length of all tenoning and slotting spindles can be used without a tool blank. Workpiece clamping by means of a clamping bridge. Operated by a clamping cylinder installed under the table. NC-controlled long fence mounted on the slotting table. Studio window device Swivel angle max. +/- 75° The minimum workpiece length for slanted windows depends on the angle and the width of the wood. Possible part dimensions for slanted window production Angle Max. Min. Working width Workpiece length +/-75° 80 mm 800 mm +/-70° 120 mm 490 mm +/-60° 240 mm 360 mm +/-90° 350 mm 185 mm For angles greater than 60° only counter processing Commission not documented 1)NC automatic angle adjustment for machining angled parts Splinter protection by means of overtravel counter Over the entire spindle length of the tenoning and slotting spindle for 90° machining Manually trackable counter-rail for angled part machining 2) Additional counter-rails

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: AA2/001942, SECOND-HAND 6 SPINDLES MOULDER SCM MOD. SUPERSET NTPL - CE RULES - 1. Horizontal bottom 11 kw - 2. Vertical right 7.5 kw - 3. Vertical left 7.5 kw - 4. Horizontal top 11 kw Nedjywfkvspfx Aqweda - 5. Horizontal top 7.5 kw - 6. Horizontal bottom 7.5 kw - Label AA2/001942 - Year 2012

Year of construction: 1990, condition: excellent (used), Double miter saw STRIFFLER Cutting length 2.2 m Ndsdpfx Aeibyknsqwja