Diesel Forklifts

Still R70-35

Condition: used, machine/vehicle number: 70410188, Year of construction: 1991, fuel type: diesel, weight max. in kg:3500 kg stroke:3300 mm fork length:2400 mm width of fork carrier plate:1300 mm height over floor:2350 mm weight:5799 kg :10020 kg :9140 kg :3000 kg weight of the machine ca.:5,8 t dimensions of the machine ca.:4,70 x 1,36 x 2,36 m :2,25 x 1,36 x 2,36 m equipped with safety glass front and back, opening rear panel, windscreen wipers Bsdpocxxv Refx Akqsdd front and back, reversing light, brake lights, indicators front and back, front lights, adjustable seat, safety belt, hand brake, tank gauge, engine-hour display, solid-rubber tyres

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 20,200 h, load capacity: 5,500 kg, fuel type: gas, Equipment: clamp, gripper hydraulics, For sale is a Hyster S 5.5FT gas-powered forklift. The forklift is fully functional and in good condition. Not offered with forks as shown, but with a Mayer paper roll clamp with rotary hydraulics from 2005 (last photo). Technical specifications: Year of manufacture: 2012 Rated load: 5500 kg (5.5 tonnes) Load center: 600 mm Turning radius: approx. 2375 mm - 2534 mm Lift height: up to 5300 mm Free lift: available Transmission: DuraMatch™ 1-speed or DuraMatch™ 2-speed Travel speed (loaded/unloaded): approx. 16.7 - 17.2 km/h Dimensions: approx. 3,500 mm * 1,420 mm * 2,500 mm mm Weight: approx. 7,800 kg Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? Bdedpfx Akjwalyioqsd For further information or to contact us, visit our website

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 13,254 h, load capacity: 3,500 kg, lifting height: 3,500 mm, free lift: 150 mm, load center: 500 mm, fuel type: diesel, mast type: mono, construction height: 2,500 mm, motor manufacturer: Deutz, fork length: 1,200 mm, empty load weight: 6,100 kg, Equipment: cabin, lighting, pallet forks, sideshift, trailer coupling, Still H 35 T - ex German Army (Bundeswehr) Manufactured in Germany. Good condition, technically sound and ready for operation. Operating hours have been read off. 13,254 operating hours Full cab Exterior mirrors Heater STVO-compliant lighting 2 rear work lights Standard mast Lifting height: 3,500 mm Overall height: 2,500 mm Free lift: 150 mm Integrated side shifter Forks: 1,200 x 125 x 45 mm - N E W - Forks: 1,200 mm 3rd valve Bdsdeyrdwvspfx Akqod SE tyres Front tyres 80% Rear tyres 80% Technical specifications subject to error. Sale takes place without warranty.

Condition: excellent (used), Year of construction: 2006, FAMUP MCP 45 CNC machining center TECHNICAL DATA Bjdpfx Akeq U Rm Hoqjdd axes Number of axes: 3 X-axis: 450 mm Y-axis: 300 mm Z-axis: 400 mm Feed rate Work feed X,Y,Z: 10`000 mm/min Rapid feed X,Y,Z: 30`000 mm/min Working pressure force X,Y: 2000 N Working pressure force Z: 3300 N Pallet Dimensions: 400 x 300 mm Number of grooves: 2 Groove width: 14 mm Groove spacing: 80 mm Max. Table load: 100 kg Changeover time: 9 sec. Spindle Spindle motor power: 5 kW Speed: 10`000 rpm Tool changer Magazine slots: 16 Max. Tool diameter: 63 mm Max. Tool length: 150 mm Max. Tool weight: 4 kg Tool change time: 1.7 sec Weight: Approx. 3000 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Storage location: Nattheim Bjdovvi Nbspfx Akqodd

Condition: used, table length 400 mm table width 300 mm x-travel 300 mm y-travel 250 mm z-travel 250 mm weight of the machine ca. 1,2 t dimensions of the machine ca. 2000 x 1200 x 2500 mm Bedsvwgq Sopfx Akqsdd The machine is supplied with a wide range of accessories

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Bjdpstvf Htofx Akqedd Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Working spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant system, linear guides, and 30-tool automatic tool changer. Table size: 2 x 1000 x 450 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1100 mm Y-axis: 500 mm Z-axis: 640 mm Spindle speed range: 50 – 10,000 rpm Bdedpfjd I R E Nex Akqsd Table load: 600 kg Feed rate range, X/Y/Z, stepless: -10,000 mm/min Rapid traverse in all axes: 30 m/min Drive power: 18.5 kW Machine dimensions L x W x H: approx. 3605 x 3041 x 3220 mm Weight: approx. 6700 kg Accessories / Special features: • CNC control system SIEMENS 840 D • Dual pallet changer • 30-tool automatic tool changer • Full enclosure with safety doors, electrically secured • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller recirculating bearing, allowing high torques to be absorbed evenly in all directions • Ball screws in all 3 axes • The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Chip conveyor with integrated coolant system • 4th axis pre-configured • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2000, functionality: fully functional, CNC lathe, HITACHI SEIKI, type HT 23-RIII, year 2000 SEICOS L MULTI DIALOG control system. Maximum turning diameter: 450 mm Bjdpfx Asv T Un Dokqjdd Maximum turning length: 630 mm Tool turret with 12 positions VDI 40 Chuck diameter: 250 mm Spindle bore: 78 mm Spindle speeds: 30-4000 rpm Rapid traverse: X and Z 30 m/min Chip conveyor. For further information, see data sheets. The machine is in good condition and can be demonstrated under power. Machine documentation is available.

Condition: good (used), Year of construction: 2001, Mori Seiki SV-500/50 4 Axis Vertical Machining Centre with Mori Seiki MSC-501 CNC Control, Table Size 1100mm x 600mm, 40 Tool ATC, BT50 Spindle Taper, Cool Jet 70 - 30 DF High Pressure, Coolant Filtration Unit, Filtermist FX7002 Oil Mist Extractor, Spindle Speed Max 6000rpm, Renishaw Tool Probe Eye, Machine Weight 7800kg. S/No. 1864 Includes Various BT50 Spindle Tool Holders in ATC and Boxes Bsdox Nap Djpfx Akqodd