Meat processing machine

Steriflow Barriquand Autoclave 1351

Condition: like new (used), Year of construction: 2010, functionality: fully functional, Brewhouse Stainless steel lauter tun with copper cladding, 1800 liters. Stainless steel mash tun with copper cladding, 1800 liters. Steam generator, stainless steel, 800 liters. Hot water tank, stainless steel, 3600 liters. Leach tank, stainless steel, 397 liters. Stainless steel tank, stainless steel, 1900 liters. Plate heat exchanger: M9 NBN Plate heat exchanger: SIGMA M13 NAL SIEMENS control system 5 centrifugal pumps Storage Total volume: approx. 48,000 liters. 3 x horizontal stainless steel tanks, identical, 1600 liters each, on a frame with casters. 3 x vertical stainless steel tanks, identical, 1600 liters each. 1 x vertical stainless steel tank, stainless steel, 2100 liters. 11 x stainless steel tanks V2A vertical, identical, 2000 lt each. Kfsdpewiu Twofx Aa Esa 4 x V2A horizontal stainless steel tanks, on a frame, identical, 1000 lt each. 5 x V2A vertical stainless steel tanks, identical, 1690 lt each.

Condition: used, Year of construction: 2010, turning diameter max. 410 mm turning length 1.235 mm control IT / Turn Plus Heidenhain greates pass round over bed 700 mm turning speed range - main spindle max. 4.000 min/-1 power capacity - main spindel 35 / 45 kW max. Torque 770 Nm spindle head 220 h5 spindle diameter in front bearing 160 mm max. usable bar diameter 95 / 104 mm C-Axis 0,001 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Kjdpfxsvzhiwj Aa Eofa Spindle speed - driven tool stations max. 4.000 min -1 power capacity driven tool-stations 12 kW max. Torque 36 Nm tool taper VDI 40 DIN 69880 turret change time 30°: 0,4 sec. Y - Axis 120 (+/- 60) mm x-axis 300 mm z-axis 1.300 mm y-axis +/- 60 mm tailstock 1.200 mm taper of center MK 5 clamping capacity 1.400 daN rapid traverse ( X / Y / Z ) 30 / 22,5 / 30 m/min total power requirement 60 kVA weight of the machine ca. 7,7 t dimensions of the machine ca. 6,0 x 3,5 x 2,5 m CNC - Turning- and Millingcenter GILDEMEISTER - CTX beta 1250 V4 - Tailstock - Y-axis - Tool drive - Direct measuring system - Bar machining package - Connection for bar feed / bar loading magazine

Condition: good (used), machine/vehicle number: 2852, Year of construction: 2006, load capacity: 8,000 kg, lifting height: 5,000 mm, mast type: duplex, fork carriage width: 150 mm, fork length: 1,600 mm, total length: 4,120 mm, total width: 2,220 mm, additional equipment features: Dual tread, Weight system, Fire extinguisher, Equipment: lighting, TCM FD80 from Uniktruck Kfsdpfxerk Rd No Aa Eea

Condition: good (used), Technical specifications: Kfjdpfswchplex Aa Eoa Working length: 3050 mm Max. bending capacity: 30.0 mm Pre-bending: 25.0 mm Number of driven rollers: 3 Top roller diameter: 410 mm Bottom roller diameter: 380 mm Hydraulic folding bearing Extended rollers for profile bending Control panel with digital display Motor power: 40 kW Dimensions (length x width x height): approx. 6900 x 2000 x 2450 mm Weight: approx. 22 tons Accessories: Side hydraulic bending aids

Condition: excellent (used), Year of construction: 2003, pressure: 13 bar, 1 fired steam boiler ----- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 sqm Boiler capacity max. : 1.250 kg/h Kfodpouugi Sjfx Aa Eoa Operating overpressure : 13,0 bar increased test overpressure : 24.05 bar Water content at NW approx. : 993 l Water content full approx. : 1,365 l Year of construction : 2003 CE mark : 0036 equipped with Weishaupt gas burner type G7/1-D, ZMD-LN, 250-1,550 kW, 15-500 mbar, gas control system, switch cabinet, feed water pump and the existing coarse and fine fittings. Econmizer: Eco 3, 82 kw, 31 bar, 238°C, 28 ltr.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, overall weight: 8,000 kg, total length: 9,040 mm, total width: 3,390 mm, total height: 3,690 mm, space requirement length: 11,040 mm, space requirement width: 3,390 mm, space requirement height: 4,000 mm, Equipment: documentation/manual, Transportable cleanroom container ABN Stericube, as good as new, suitable for outdoor installation, so far only indoor installation, serviced annually (last maintenance log: see documents). Optional cleanroom equipment available (cleanroom vacuum cleaner, work tables, shelves + cabinets). Features: * Cleanliness class: ISO 6 (in the cleanroom, one class below in personnel and material airlocks) * Filter: HEPA H14 * Max. volume flow: 2 x 1,250 m3/h Kfodjtvf Ahspfx Aa Eea * Air exchange rate: 10 - 60 ACH * Electrical connection: 380 V AC, 50 Hz, 3 Ph, 16 A * Sockets inside: 8 x 230 V AC, 50 Hz * Internal dimensions of clean room: 5 x 3.2 x 2.35 m * Temperature: 20 °C +/- 2 K * Humidity: not regulated

Condition: ready for operation (used), A Hako compact sweeper with 2 disc brushes and central suction is available. Axle loads 1/2: 1200kg/1500kg, turning circle: 1390mm, engine: Yanmar 3TNV88C, power: 25.5kW, displacement: 1642cm³, cylinders: 3, emission stage: V, fuel capacity: 41l, forward/reverse speed: 25km/h/12km/h, operating hours: 97.6h. Machine dimensions X/Y/Z: approx. 3150mm/2000mm/1100mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible. Kfedowaa Hqjpfx Aa Eja

Condition: excellent (used), Year of construction: 1998, cutting diameter 150 mm cutting range min. 150 mm saw blade diameter 400 mm cutting length min. 420 mm cutting lenght max. 4000 mm dimensions of the machine ca. 4800 x 1100 x 1500 mm The double tiller saw is in very good condition and has only been used very little use. Kfedpfjvwgnwox Aa Eoa

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized control Motor power: approx. 30 kW Power supply: 400 Volt, 50 Hz - Backgauge with ELGO position control - Backgauge adjustment via ball screw spindles - SICK safety light curtain at the front for access protection - 3 material support arms with ball rollers - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Extremely heavy-duty machine in very robust construction Base machine dimensions L x W x H: 4650 x 2610 x 3200 mm Kfedpfxsd Hxx Ae Aa Eea Base machine weight: 27,000 kg Transport space required (base machine) L x W x H: 4650 x 2610 x 3200 mm Transport space required (additional) L x W x H: 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau. Test cuts possible.

Condition: like new (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 956158, control type: manual, number of rollers: 3, shaft diameter: 75 mm, overall weight: 1,300 kg, total length: 1,000 mm, total width: 1,130 mm, total height: 1,100 mm, power: 4 kW (5.44 HP), input voltage: 380 V, We can offer you a ROUNDO (Sweden) electro-hydraulic profile bending machine Model: R-3 Capacity: 14 cm³ Machine no.: 956158 Delivered to agent: 10-1995 Delivered to customer: 26-07-1996 Dimensions: 1 x 1.13 x 1.1 m Weight: 1300 kg Shaft diameter: Ø 75 mm Motor power: 4 kW - Hydraulic machine - Can operate in horizontal or vertical position - 3 driven rolls Included: Brake motor Push-button control Digital readout 1 extra set of rolls for tube Ø 48 and Ø 42 mm Dutch-language manual Price for the ROUNDO section bending machine, model R-3: on request via email The machine has its original paint and has been used very little! Kfjdpfx Aajxl Sq Aj Esa Delivery conditions: Delivery time: available from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: prior to collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that trades and stocks mainly used Kardex Remstar VLM automatic lift (shuttle systems) & rotary storage systems (paternoster systems). See our website for current stock. We assemble and/or dismantle these systems safely with VCA-certified technicians and have been doing so for over 33 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7–B 5111 PA Baarle-Nassau The Netherlands