Mixing and Filling Machine

STEINER, HÖFELMEYER

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ Ndedpfx Aet Hagnja Esf * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Year of construction: 2005, condition: refurbished (used), functionality: fully functional, Type: Loma IQ2 Search head dimensions: 550x220 (wxh in mm) Product dimensions: 500x165 (wxh in mm) Conveyor belt length: 1500mm Conveyor belt width: 500mm Conveyor belt height: 850+/-50mm Basic sensitivity: FE:1,5/NFE:1,8/SUS(316):2,0mm Search frequency: 156kHz Year of construction: 2005 Conveyor belt: modular belt Conveyor speed: 25m/min Ndsdpfxor Eq Une Aa Esf Drive: gear motor Connection: 400V/50Hz Removal : stop at detect Operating side: from right to left

Condition: new, Year of construction: 2023, New flexo printing machine for printing 3-color corrugated paper with automatic feeding. KIKI 1200 Automatic 3 colors printing machine for corrugated board Colors: 3 colors Material: Corrugated board, Cardboard Printing width: 1200 mm Printing length: 800 mm Material thickness: 1.5mm-7mm Speed: Max. 60 pcs/min Feeding: Automatic Ink system: 3 pcs, Pneumatic pumps Production year: 2023  With motorized longitudinal register  Anilox cylinders, 3 pcs  Cliché holder cylinders, 3 pcs  Cliché holder hoist lifting NEW machine never used, we bought it as a demo machine from China and we made modifications on it for professional use. Nsdpfx Aasrg D Hps Eedf

Year of construction: 1985, condition: good (used), FILLETING LINE FOR FISH Item: D-1640-Baader-FilletingLine Manufacturer: Baader Consist of Model: 478 Year of manufacture: 1985 Has been used for sardines Baader in feed line consisting of: Baader mobile automatic 5 lane infeeder, type: 478 . Baader mobile automatic feeder, type: 478, year of construction: 1985, 400 V, 3 Ph, 50 Hz, 5 A, 5 lanes, lane width: (5x) 40 mm, total dimensions: 3350 mm x 1300 mm x 2450 mm. Nsdpfx Aajd Dtuhe Esdf

Condition: used, mileage: 229,000 km, power: 93 kW (126.44 HP), first registration: 11/2010, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, central locking, NEW!!! Chat with our sales consultant via WhatsApp: *.----Optional: Nedswzgi Ijpfx Aa Eedf * 12-64 month warranty (valid throughout Europe) * New inspection * New MOT & AU (exhaust emission test) * Nationwide delivery * Financing also without a down payment ---- * 19% VAT deductible * German vehicle * Regularly serviced * Euro 5 standard ---- We offer attractive leasing and financing offers - contact us! (Without a down payment upon request) Have we piqued your interest? Please contact us by phone at: or by email at: ----Directions: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45177 Datteln Germany Opening Hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. ----Legal Notice: The information provided online is non-binding. It does not represent guaranteed features, but merely serves as a general identification of the vehicle and does not constitute a warranty under the German sales law. Please understand that we may also make mistakes. Therefore, we expressly reserve the right to make prior sales, errors, or typing errors, particularly regarding technical specifications and the advertised equipment. The vehicle description serves only as a general identification of the vehicle and does not constitute a warranty under the German sales law. The information/descriptions provided are non-binding, and the seller assumes no liability or warranty for typing or data transmission errors. Equipment must be checked separately if necessary. Only the condition that was inspected on-site at the time of purchase or confirmed in writing is considered to be in accordance with the contract. Please understand that we prefer to sell vehicles with a mileage of 50,000 km or more or older than 3 years to our commercial customers.

Condition: good (used), Used in good condition 4 pieces in stock Nodovt Szzepfx Aa Eodf

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: T800kVA, input voltage: 10,000 V, nominal power (apparent): 800 kVA, secondary voltage: 400 V, Three-phase oil-immersed transformer in a hermetically sealed design for rooftop/outdoor installation according to Ecodesign Level 2 (aluminum) High/Low voltage: 10 kV / 0.4 kV Rated power: 800 kVA Nsdpfx Aajuba Rne Ejdf Circuit group: Dyn 5 CE certification Overload: according to IEC 60076-7 Overvoltage: according to IEC 60076-3 24-month warranty - Price upon request - We can provide you with a detailed quote upon request - Our terms and conditions apply Energie-Anlagen-Röring GmbH Rudolf-Diesel-Straße 3b 48691 Vreden

Condition: new, Year of construction: 2025, -TFON Edge Rounding & Surface Processing System. Designed for superior versatility and precision, this system is engineered to process mild steel, aluminum, and stainless steel materials with thicknesses from 0 to 120 mm. It offers advanced edge rounding and surface cleaning capabilities tailored to demanding industrial applications -Material Compatibility -Mild Steel, Aluminum, Stainless Steel -Working Thickness Range -0 – 120 mm Edge Rounding: Radius 2 edge rounding for smooth, safe edges that enhance both aesthetics and functionality Precision Control: Integrated Siemens automation system delivers accurate, consistent control throughout processing. Independent Processing Stations: Multiple stations allow simultaneous or sequential processing, offering flexible workflow configurations. Table Size Options: Available with 650 mm, 1000 mm, or 1300 mm working widths to suit diverse production requirements. Table Types: Magnetic, vacuum, or magnetic-vacuum tables provide secure, adaptable support for various materials and part sizes. Plasma & Oxygen Technology: Advanced plasma and oxygen systems efficiently remove heavy burrs and dross after cutting, ensuring cleaner surfaces. Surface Purification: Ndodpfei E Tkasx Aa Eof Effectively eliminates dirt, rust, oxide, and scale, preparing parts for subsequent processing such as welding or coating Edge Rounding for Coating: Produces uniform, defect-free edges ideal for painting and coating applications. Industry Applications: Steel Service Centers, Energy, Mining, Construction, Automotive — engineered for heavy-duty, high-performance use. Uniform Edge Results: 8 flap wheels work together to deliver consistent radius edges on every part. Pneumatic Oscillation System: Extends abrasive band life and maintains consistent performance by reducing wear through pneumatic oscillation. Engineered for industrial precision. Built for durability. Designed for versatile applications. TFON – Excellence in Edge Processing and Surface Preparation.

Year of construction: 2015, condition: excellent (used), Syspal Tote Bin Lifter / Tipper Tipping height 1400 Fully stainless steel Njdpfx Aajim Ivve Eodf Mobile on lockable castors Electrohydraulic operation Built-in battery power pack Complete with plug in charger Charge lasts for 1 week, depending on usage In excellent condition

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2025, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 12/2027, working width: 750 mm, conveyor belt width: 750 mm, type of input current: three-phase, total width: 966 mm, total length: 855 mm, total height: 714 mm, Baguette - long roller Model: Ultima with 3 rollers Capacity: min 50 - 1200 g max (depending on the type of dough) Unrolling width: up to max. 750 mm stainless steel design, Connection: 400V, 1.1 kW, 16A-CEE plug Dimensions: 966 x 855 x 714 mm, WxDxH NEW machine with 24 months warranty Njdpfohwzkgsx Aa Eodf Option: base speed controller infeed conveyor discharge tours Discharge belt with drive feed guides Visit our large bakery machine park!