Tool milling machine

STANKO 676P

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Cjdox S Rcmepfx Aa Herg

Year of construction: 1967, condition: good (used), machine/vehicle number: 7011/C, table mounting size: 310 x 1400 mm table movement x: 950 mm table movement y: 325/345 mm Cjdjd Rxw Hjpfx Aa Hsrg table movement z: ca. 500 mm spindle turning speed range: 20 - 1500 rpm carriages longitudinal and cross: 18 - 620 mm/min carriages vertical: 18 - 620 mm/min electrical connection: 380 V kW space needed: 1900 x 1600 x 1750 mm weight: ca. 1500 kg

Condition: used, Technical details: x-travel: 500 mm y-travel: 200 mm z-travel: 300 mm spindle taper ISO: MK 4 Crsdsu Nc Uuepfx Aa Hsg quill stroke vertical: 60 mm spindle head swivable left - right: 45° ° Distance- spindle nose to clamping surface: min./max.: 50 / 350 vertical mm throat: vertical 250 mm table clamping surface:: 710 x 200 mm table swivable approx.: 45° rechts/links turning speed range: 50 - 2 240 / 24 step U/min feed:: 25 - 1 120 / 24 step mm/min total power requirement: 3,2 kW weight approx.: 1390 kg dimension machine xH: 1,7 x 1,5 x 1,7 m - spindle center distance / clamping surface vertical: min/max: 50 / 350 mm - spindle nose / clamping surface horizontal: min/max: 0 / 350 mm - travel range of the milling bar 600 mm - without counterholder - incl. machine vice *

Condition: used, functionality: not functional, Adcock-Shipley milling machine. NON-FUNCTIONAL unit!!! Good mechanical condition, no electronics. We can refurbish the unit for an added fee. Please check out our other listings as well. Crodpfxsr Dvqpe Aa Heg

Condition: excellent (used), x-travel 450 mm Crjdjvwgn Depfx Aa Heg y-travel 175 mm z-travel 400 mm spindle turning speed range 60 - 2800 U/min tool taper ISO SK-30 weight of the machine ca. 1 t dimensions of the machine ca. 1,1 x 1 x 1,5 m Die Fräsmaschine ist in einem sehr gutem gepflegtem Zustand

Condition: defective spare-parts repository (used), Make: Stanko Year of manufacture: 1972 Machine number: 2334 Type / Model: 6R82G Cjdpfx Aow D Racoa Herg Travel x-y-z: approx. 1,200 - 250 - 300 mm Table: 1,250 x 320 mm Speed range: 31.5 to 1,600 rpm Spindle taper horizontal: SK 50 vertical: MK4 Feeds: 0.25 to 12.5 mm/min Connection: 7 kW Accessories/Equipment: Vertical head Condition: feed defective Weight: 2.7 t Dimensions: 1,500 x 2,000 x 2,200 mm

Condition: used, Year of construction: 1995, Used Filling Monoblock FIMER 16-1 up to 3500 BPH Cedpfx Asvgvlwoa Herg Introduction to the Filling Monoblock FIMER 16-1 The Used Filling Monoblock FIMER 16-1 excels in the bottling industry with its impressive production capacity of up to 3500 bottles per hour (BPH). Originally designed in 1995, this machinery combines robust construction with advanced technology, thereby establishing itself as a top choice for companies that prioritize efficiency without compromise. Technical Specifications Equipped with 16 valves, this monoblock operates using a gravity or light depression filling system. Ideally, it minimizes foam formation and ensures even filling. This type of monoblock works perfectly for fillining spitrits and still wines. Moreover, the system adapts seamlessly to bottle sizes of 0.70 L and 1.0 L, significantly enhancing production line versatility. Components and Operation Furthermore, the capping system of the Filling Monoblock FIMER 16-1 employs a fixed nozzle, specifically designed for T-stoppers. The capping head effectively manages 21 mm diameter caps, securing a reliable and high-quality seal crucial for preserving the bottled contents. Configuration and Maintenance Currently, the Monoblock, still in production, demonstrates significant reliability and maintenance ease. Its design incorporates a clockwise rotation, an important consideration for integrating the machinery into existing lines to optimize workflow. Efficiency and Sustainability Additionally, this Filling Monoblock not only achieves high efficiency in production capacity but also adheres to sustainability standards by minimizing material waste. Consequently, this feature becomes increasingly vital for companies committed to reducing their environmental impact. Final Considerations of the Filling Monoblock FIMER 16-1 Employing the Filling Monoblock FIMER 16-1 reflects a commitment to maintaining high-quality and efficiency standards in the bottling industry. Its proven reliability, combined with modern maintenance practices, ensures that this machine remains essential for any bottling operation striving for excellence. Ultimately, investing in a system like this Filling Monoblock  is a wise decision for the future of production.

Condition: used, Year of construction: 1988, Technical details: table diameter: 500 mm table height: 150 mm rotatability of the table - manual/mechanic: 360 ° weight of the machine approx.: 110 kg dimensions: 800 x 800 x 180 mm Rotary table operation by handwheel Operation Coupling connection Ø 20 x 32mm Foot mounting: 2x clamping groove Ø 19 x29mm Equipment: 8-sided top plate, size 665mmx23mm, 3x through-holes Ø 30mm in the centre Accessories: 4x eyebolts Cedsu N D I Ajpfx Aa Herg *

Year of construction: 1945, condition: used, New: No Serial number: 15 HP LISTER DIESEL TAKEN OUT AN OLD ALUMINIUM SLOOP EXACT AGE UNKNOWN. Cedpswz H Uqefx Aa Hjrg

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK DG20 is an advanced spiral drill sharpener designed for professional use in industrial plants, tool rooms, and service workshops. It enables precise sharpening of high-speed steel (HSS) and cobalt drill bits in the range of ø2–20 mm. Thanks to the CBN (borazon) grinding wheel, robust construction, and a complete set of collets, the machine ensures high-quality and repeatable sharpening results. Main advantages of the machine Wide diameter range – allows sharpening of drills from ø2 to ø20 mm. Adjustable point angle – from 90° to 135°, enabling precise adaptation of the cutting edge geometry to specific applications. CBN (borazon) grinding wheel – highly durable and designed for sharpening high-speed steel drills, ensuring excellent sharpening results. High rotational speed – the 4800 rpm motor provides fast and clean grinding performance. No need for specialized training – the guided tool positioning system allows accurate sharpening even without extensive machining experience. Compact design – small dimensions and a weight of 11 kg make it ideal for mobile applications and limited workspaces. Complete equipment included – ER20 and ER25 collets with two clamping holders allow immediate operation without additional accessories. Design and technology The CORMAK DG20 drill sharpener is manufactured from high-quality components to ensure durability and precision. The rigid housing design minimizes vibrations, resulting in improved grinding accuracy. The key component is the CBN grinding wheel, designed for intensive use and ensuring uniform sharpening of every cutting edge. The collet guidance system has been optimized for ergonomics and repeatability, while the 180 W motor provides sufficient power for efficient regeneration of cutting tools. Precision and work efficiency Thanks to precise tool guidance and the appropriate grinding wheel selection, the CORMAK DG20 drill sharpener enables the user to achieve perfect cutting edge geometry. This results in: reduced cutting resistance, improved hole quality, extended drill service life. Operation does not require specialist knowledge – simply place the drill in the correct collet, insert it into the holder, and rotate it several times to obtain a fully functional cutting edge. Applications The DG20 model is suitable for: maintenance departments in industrial plants, tool rooms performing cutting tool regeneration and sharpening, service workshops and repair centers, technical schools and vocational training facilities for teaching basic tool sharpening skills. Standard equipment CBN grinding wheel – 1 pc. (for HSS steel) Csdjvu Abbjpfx Aa Hsrg 11 × ER20 collets: ø3 – ø13 mm 6 × ER25 collets: ø14 – ø20 mm 2 × clamping holders – ER20 and ER25 Technical specifications Parameter Value Drill diameter range ø2 – 20 mm Point angle 90° – 135° Power supply 180 W / 230 V Motor speed 4800 rpm Weight approx. 11 kg Dimensions 390 × 175 × 170 mm