Stäubli RX160

Stäubli RX160 / RX160L

Condition: ready for operation (used), Year of construction: 2017, Two Stäubli robots including controller and stand are available. 1) 2x Stäubli RX160L robots, year of manufacture: 2017, axes: 6, payload nominal/maximum: 14kg/28kg, reach: 2010mm, repeat accuracy: +/-0.05mm, max. speed: 12.3m/s, weight: approx. 250kg, operating hours: approx. 52000h. 2) 2x Stäubli CS8C-RX160 controllers, year of manufacture: 2017. 3) 2x robot stands for Stäubli RX160L. Documentation available. On-site inspection is possible. Njdpfxswt Tltj Aa Eswr

Condition: used, Year of construction: 1980, machine/vehicle number: 19780, grinding length:600 mm grinding width:300 mm workpiece height:375 mm number of spindle speeds:1000 - 3000 UpM grinding wheel dimensions::300 x 50 x 76,2 mm grinding spindle drive:2,8 - 8,4 kW weight of the machine ca.:3,5 t Nodpfx Aocxxrzsa Eowr CNC-controlled, 3D-controlled profile-dressing unit, Unicom ELB-CNC control with integrated 024 CNC Unicon electric hand wheel, display screen, analogue spindle load display, stepless adjustable cross feed, coolant device with magnetic-roller chip collector, full housing, separate electrical cabinet, additional grinding wheel with flange

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Nwodpfxoia Rtdo Aa Ejr Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Robot Manfacturer: Staeubli Nwodpsbrhtdefx Aa Ejr Type: RX170

Condition: used, Year of construction: 1996, grinding length 600 mm grinding width 250 mm Nedet Tqrnjpfx Aa Eewr workpiece height ca. 385 mm table surface area 600 x 200 mm table speed -stepless- 2 - 35 m/min table load capacity max. 250 kg grinding wheel size ø 225 x 25 mm grinding wheel hole diameter 50,8 mm vertical feed autom. 0,001 - 0,099 mm rapid traverse vertical 600 mm/min cross feed of table continual 10 - 1000 mm/min rapid traverse cross 1000 mm/min total power requirement 6 kVA dimensions of machine L x W x H 2,65 x 1,70 x 2,28 m Accessories: DRO on Y-and Z-axis, magnetic plate 600 x 200 mm, grinding wheel with flange, wheel trueing attachment, wet grinding attachment with paper band filter

Condition: excellent (used), Year of construction: 2016, Kuka KR10 R1100 Sixx KRC4 Nsdpfjmdrpvox Aa Eswr including panel, cable and control cabinet. 15.700 operating hours We are happy to offer you the robot also reconditioned! 2 more available with: 16.500 operating hours 16.000 operating hours

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Nwodpfx Aerz Nfloa Esr Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: reconditioned (used), Robot welding machine with 2 m two-station turner. Offered is a robot welding machine from the company Yaskawa Motoman incl. RM2-250 turner Safety engineering Robot UP20 XRC nozzle cleaner etc. The system can be set up and put into operation by us. There is also the possibility of instruction and training. The plant is prepared according to customer requirements Nwjdpfx Ajd Tfb Nea Eer We are YASKAWA system partner and offer you the complete service for your Motoman robot and your systems.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, overall weight: 222 kg, arm reach: 1,500 mm, warranty duration: 12 months, All of our advertised machines and spare parts are supplied after a complete overhaul, only the skeleton remains, we replace all sliding, rolling, sealing and locking components in gears, bearings, thermistors and brakes in drives, we fit new HDDs in a clean installation. Everything is debugged and carefully tested. Nwodpfx Aeq Sxwfoa Eer Robot after complete overhaul in 2023, tested, fully functional, with the possibility of subsequent maintenance. Sold with interconnecting cabling and controller. Price is without VAT. 3 pieces for sale.

Condition: used, mileage: 122 km, power: 19 kW (25.83 HP), first registration: 01/2020, overall weight: 1,327 kg, fuel type: diesel, color: green, gearing type: mechanical, suspension: other, operating hours: 122 h, total length: 3,094 mm, Equipment: all wheel drive, cabin, trailer coupling, Power steering, HU/AU new, diesel First registration 02.01.2020 19 kW 1,116 cm³ 122 operating hours Cabin Hydrostat All-wheel power steering Rear hydraulics Rear PTO Maximum speed 15 km/h Length: 3.09 m Width: 1.20 m Height: 2.12 m Trailer coupling Trailer coupling Maul Grass tyres Permissible total weight 1,327 kg Front hydraulics can be retrofitted. Production/factory delivery 2018. FOR US, THE CONDITION AND THE FEEL OF THE CONSTRUCTION ARE DECISIVE, THE PRICE TAKES SECOND PLACE. If you have any further questions, please contact Mr. Faller at the number. //*EXCHANGE, DEPOSIT OR RENTAL OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You will find further offers on our homepage: The description and data given do not constitute a guarantee and are not binding. The contract of sale concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Nwedpfx Aovic Auja Eer