Pneumatic Pipe Saw Pipe Saw Jigsaw

Spitznas 512120010

Condition: used, Roller sets for section bending machine, 3-roll ring bending machine HERKULES WETZLAR The rollers fit a section bending machine HERKULES WETZLAR type BO 238 N Shaft diameter: 60 mm with 18 mm keyway 2 rollers set No. 1, roller diameter = 110 mm, roller width = 180 mm 2 rollers set No. 2, roller diameter = 160 mm, roller width = 40 mm 3 rollers set No. 3, roller diameter = 150 mm, for tube diameter Ø 33 mm, roller width 87 / 115 mm - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm without keyway The machine had 2 driven rollers Total weight of all rollers: 57 kg Gtedpfoglaq Iex Afnou Good condition

Condition: good (used), Year of construction: 2009, TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Merkle, TIG welding machine water-cooled, with transport trolley -Type: TIG 240 DC -Welding power: max. 240 A -Cooling: Merkle WK 230 water circulation cooler -Accessories: incl. ground cable, hose package see photos Gtodpfsqw D Eisx Afnsu -Dimensions: 970/560/H1085 mm -Total weight: 99 kg

Year of construction: 2021, condition: new, Fastech horizontal band saw BMSO 350 GA Cutting capacity (round) mm: 350 Cutting capacity (rectangular) mm: 400 x 350 Cutting capacity (square) mm: 350 x 350 +30° Round cutting range mm: 320 +30° Flat cutting range mm: 400 x 350 +30° Square cutting range mm: 350 +45 ° round cutting range mm: 320 +45 ° flat cutting range mm: 290 x 300 +45 ° square cutting range mm: 290 x 290 Engine power main drive kW: 2,2 Hydraulic pump power kW: 0,37 Coolant pump power kW: 0,12 Band speed, infinitely variable mm: 20-100 saw band dimensions mm: 4160x34x1,1 working surface height mm: 760 weight kg: 1050 length mm: 2450 depth mm: 920 Height mm: 2020 roller conveyor 1200mm infinitely variable belt speed hydraulic vice High performance gearbox Hydromechanical saw band tensioning Saw band brush Godpfx Afog Ekt Njnotu Control system

Condition: used, Year of construction: 1990, I - beam section - flat steel 140 x 140 x 13 mm I-beam section - upend 120 x 120 x 13 mm L-beam 130 x 130 x 12 mm round bar steel 85 mm bending capacity - flat iron 125 25 mm flat steel 65 x 65 mm including various rollers: Pipe Ø: Gtodjtt Ecdspfx Afnju 219 mm (tool/roller Ø 535 mm) 140 mm (tool/roller Ø 420 mm) 273 mm (tool/roller Ø 520 mm) 203mm 168.3 mm (tool/roller Ø 500 mm) 75 mm (tool/roller Ø 400 mm) 49 mm (tool/roller Ø 420 mm) 48.3 mm (tool/roller Ø 420 mm) 22.5 mm (tool/roller Ø 420 mm) 32/32.5 mm (tool/roller Ø 420 mm) 60 mm (tool/roller Ø 420 mm)

Year of construction: 1997, condition: good (used), material dimensions max. round: ​Ø 380 mm max. square: 380 x 380 mm Gjdpfx Aeha Hdhsfnetu segment length with single stroke: 10 - 510 mm with multi stroke: max. 4590 mm dimensions LxWxH: 3100 x 2200 x 1850 mm weight: 3.100 kg

Condition: used, Year of construction: 2008, Material feed in any length (max. stroke 610 mm) Cutting diameter: round 510 mm, flat 500 x 500 mm Cutting speed adjustable via control: 25 - 235 m/min chip conveyor Operating instructions, circuit diagrams and spare parts lists available Gedpfx Afsvxqtajnetu Just under 5,000 sawing hours Further technical data see photo or on request Machine weight: approx. 3 t

Condition: good (used), Year of construction: 1964, Profile bending machine. Produced by Girggio - ITALY - 1964. Type. PA-14. 8kW main engine. Roller screw drive motor 5.5 kW. Dimensions L x W x H 2200 x 1300 x 1400 Weight approx. 3000kg. Gjdpolbilrofx Afnjtu

Condition: excellent (used), Power source 250 Amp (60% duty cycle) WELDKAR WK MIG 250 DUAL PULS, suitable for industrial use. In continuous use, the maximum welding current is 195 A. The MIG 250 Dual Pulse welding machine is versatile and is suitable for MIG / MAG, TIG (lifting arc) and MMA (electrode) welding. Equipped with various synergic welding programs for steel, stainless steel, aluminum and CuSi3. In addition, this welder is equipped with the Pulse and double pulse function. Up to 100 welding programs can be saved and recalled. Parameters can also be manually adjusted by the welder if required. The power source is equipped with a digital control panel where various parameters can be easily set and read. Including gas flow, soft start, combustion, downward slope, gas flow and pulse rate control. The latter is necessary for thin-walled welding. The 2 - 4 stroke setting provides extra convenience when welding longer parts. Partly due to the 4-roller wire feed system, a long and trouble-free wire feed is guaranteed. With the MMA function, coated electrodes can be welded. To further optimize the weld, hot start arc force parameters can be set. The welder is portable and available in a mobile frame. Furthermore, they are CE and EMC certified and suitable for use with generators with a minimum power of 12.5 kVA. Gtsdpfx Asd Nzlxjfnsu WELDING MACHINES ARE COMPLETELY NEW, POST-EXHIBITION.

Condition: used, Year of construction: 1985, cutting diameter 340 mm dimensions of saw-blade 4860 x 32 x 1,1 mm cutting range square 340 x 340 mm cutting speed 17 - 120 m/min drive motor 4 kW weight of the machine ca. 2,5 t dimensions ca. 2600 x 2600 x 1650 mm ncl. chip conveyor and chip tray Hydraulic bundle clamping device incl. electrical circuit diagrams the previous owner only sawed at one speed Adjustable cutting pressure valve HSS bimetal saw band Hydraulic material and saw band tensioning with electrical monitoring Automatic height adjustment of the saw frame Automatic adjustment of the movable band guide arm Electrical piece counter Digital display of the dimension preselection Gtedpfowyfa Asx Afnju Constant, hydraulic clamping of the carbide band guides

Condition: used, System: Used tank Material: PP Length: 2.13 m Height: 2.30 m Width: 1.60 m Volume: approximately 7.83 m m³ Connections: DN 25, DN 50 and DN 80 s photo Godpfx Afsb E Dfienotu