Vertical machining center

SPINNER VC 1460

Condition: excellent (used), Year of construction: 2015, Traverses XYZ: 1020 x 540 x 510mm, table size 1200 x 540mm, ISO40 spindle taper, spindle speed 12000 rpm, Siemens 828D Control, spindle motor power 15kW, Dodpfxjylbpvs Aa Hjcl 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: good (used), Year of construction: 1998, thread length: 65 mm, Treading machine ORT Italia - RT 10 MACH-ID 9322 Make: ORT Italia Type: RT 10 Control: Siemens SIMATEC Year: 1998 Maximum pressure: 10T Max. workpiece: 30Ø Min. workpiece: 2Ø Dsdox H Rmujpfx Aa Hocl Min. Threading lenght:2mm Max. Threading length:65mm Pitch / lead: 30mm Shaft Ø: 85 - 135mm Length: 1600mm Width: 1400mm Height: 1800mm Weight: 2300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Dedpswrm Dtefx Aa Hocl Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: good (used), Year of construction: 2019, Traverses X Y Z 762 x 508 x 520mm, A axis 30/110 degrees, C axis 360 degrees, table size 250mm diameter, table load 200kgs, spindle speed 12,000 rpm, spindle taper Din 40, 40 station ATC, WinMax 5 control, through spindle coolant, swarf conveyor. Dsdpezh I Agofx Aa Hocl

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Machine model: ALC400G Max. workpiece dimensions (W×D×H): 600 × 470 × 240 mm (Flushing) Max. workpiece dimensions (W×D×H): 600 × 470 × 230 mm (Submerged) Max. workpiece weight: 500 kg (Flushing) Max. workpiece weight: 350 kg (Submerged) Work tank dimensions (W×D): 850 × 610 mm X axis travel: 400 mm Y axis travel: 300 mm Z axis travel: 250 mm U axis travel: 150 mm V axis travel: 150 mm Taper angle (at workpiece thickness 130 mm): ±25° Wire diameter: Ø0.1 – Ø0.3 mm Wire feed speed (max): 420 mm/sec Wire tension: 3 – 23 N Machining method: Flushing / Submerged Distance from floor to table top: 995 mm Wire bobbin weight: 8 kg Machine dimensions (W×D×H): 2,115 × 2,500 × 2,230 mm Machine installation space (W×D): 3,350 × 3,850 mm Machine weight (including power supply): 3,400 kg Air pressure: 0.5 MPa Air consumption: 30 NL/min Total power input: 3-phase, 50/60 Hz, 13 kVA Dielectric tank external dimensions (W×D): 700 × 2,155 mm Dielectric tank weight (empty): 450 kg Dodpfx Aoyu Nqmja Hscl Dielectric tank capacity: 675 liters Dielectric fluid filtration method: 3 replaceable paper filters (internal pressure type) Deionizer: Ion-exchange resin (18 L type)

Condition: ready for operation (used), Year of construction: 2013, This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Dodpfex D S Ekex Aa Hecl Machine Benefits Technical Machine Benefits • Dimensions of machine (lxwxh): 2500 mm x 6600 mm x 6350 mm / weight (kg): 59000 kg • Max workpiece width: 2540 mm / max workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm /max load on table: 30000 kg table height from floor: 850 mm /effective width between columns: 3050 mm/ t-slot (width × number): 24h7 × 13 • Cutting feed rate: 1 to 10000 mm/min/ rapid feed rate: 20000 mm/min/ table movement x-axis: 6500 mm /x-axis travel: 6500 mm /y-axis travel: 3500 mm/ z-axis travel: 650 mm • Tool holder: bt50 + masz type/ tool storage capacity: 50 tools /max tool length: 300 mm • Power supply: 400v, 3 /phases, 50hz rated capacity: 513 kva /full load current: 741 a /peak current: 117/138 a /short circuit current: 18 ka • Spindle diameter: 100 mm /spindle speed: 30 to 4000 min⁻¹ • Large table size suitable for heavy loads. /extensive tool storage capacity. /high rapid feed rate for efficient operations.

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardened rolls Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Dedpfx Ajwpku Dja Hocl Power: 15 kW Dimensions (estimated) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11900 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Condition: excellent (used), Year of construction: 2001, Technical specifications: 5-axis machine: X, Y, Z, C, A Travel ranges (X/Y/Z): 500 / 450 / 400 mm Travel range A-axis: +108 / -5° Travel range C-axis: 360° CNC control: HEIDENHAIN Table diameter: 500 mm Table adjustable in degrees Maximum workpiece weight: 200 kg Number of positions in the tool changer: 30 Spindle speed: 20 – 30,000 rpm Motor power: 15 kW Dimensions (length x width x height): approx. 3700 x 2850 x 2800 mm Machine weight: approx. 5.8 tons Additional equipment: Chip conveyor Various tools Dcedpfx Aszl S Uzja Hjl Condition: Very good condition, little used Operating hours: 2,700 Machine is still in operation The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Parts shown by hand not come. Djdjyb R Erepfx Aa Hocl

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 30216 & 30277, feed length X-axis: 1,000 mm, travel distance X-axis: 1,000 mm, Universal tool milling machine Make: MAHO Model: MH 1000 Dodjp S Schopfx Aa Hecl 2x available! x-way 1000 mm tool holder SK 40 digital display . Head tiltable +/- . Table tilt and swivel +/- . Quill stroke . - 3-axis digital display - Universal table 1.250 x 740 mm (T-slot 16 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - 6 autom. quill feeds 0,02/0,03/0,05/0,08/0,12/0,20 mm/Umdr. - central lubrication, manually operated The machine can be inspected with pleasure. Immediately ready for use Free loading, transport no problem.