SIFA Idrokeg 21 KEG Washer (2020)

SIFA KEG Wascher

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Hfsdpfx Aoztpxmep Een

Year of construction: 1991, condition: used, 2 vessel brewhouse, copper cladded (knock-out wort 13 hl). Both brewing vessels are constructed from stainless steel with copper cladding. The wort kettle is equipped with electrical heating mats. Alternatively the kettle could be retrofitted for heating via steam, which would be possible with relatively low additional investment. Additional title: 13 hl knock-out wort Capacity: 13 hl/brew Duration per brew approx.: 8 h Power: approx. 34 kW (heating mats) Material: stainless steel, copper cladded Hjdpfoxbn R Dox Ap Ejfn Features: 1 mash-/lauter-tun, 1 wort kettle with hop strainer (electric heating, heating zones: 2 x frame, 1 x bottom), both vessels with temperature display, 2 Hilge pumps (type: Durietta I-200-5/0,25/4, (Q: 2 - 3 m³/h, H: 5.0 m)

Condition: used, Technical details: tank capacity: - l voltage: 230 / 50 V / Hz weight of the machine approx.: Anlage ist demontiert kg Hsdpeu Nw Enjfx Ap Ejfn OSMOSIS SYSTEM The system has been dismantled. We are selling the system/parts at cost price! Areas of application, e.g.: All types of contaminants are filtered out. e.g. bacteria, viruses, pesticides, nitrate, fertilizer residues, lime, salts The system was preserved in 2014. i.D. *

Condition: excellent (used), - Atmospheric pressure - Tanks for the fermentation and storage of wine or beer - Dome 400 mm made of AISI 304 stainless steel - Nitrogen connection with stainless steel 3/8" ball valve - Cleaning line with DIN 32 connection - AISI 316 stainless steel cleaning ball Ø 65 mm Hsdsrigczjpfx Ap Esfn - Level indicator with return flow into the container - Sampling - Bottom conical 30° - Residual drain Disc valve DIN 25 - Clear drain Disc valve DIN 25 - Bimetal thermometer made of stainless steel -20 °C/+80 °C with 200 mm long shaft - 3 adjustable feet in stainless steel - Dimensions: Ø 800 x 1950 mm (h) - High-gloss polished inside, marbled outside

Condition: used, Year of construction: 2004, functionality: fully functional, REF: MM6444 Hsdpfsy Um Anjx Ap Eefn Cimec America AM DPS 9-8-1C-1VA rinser, filler and capper monoblock. Manufacturer: C.I.M.E.C., Italy. Serial number 045, built 2004. CE marked, with EU Declaration of Conformity. A compact monoblock with 9 rinsing nozzles, 8 isobaric (counter-pressure) filling valves, a crown capping head and a ROPP capping head, for still or carbonated drinks in glass bottles. Carbonated product needs to be carbonated before filling. The machine does not include a carbonator. Filling Single pre-evacuation with CO2 bottle purge (not double pre-evacuation) No vacuum pump fitted Up to 2,000 bottles per hour (owner's figure), depending on bottle size and product Capping ROPP (screw cap) head enabled, set up for 28mm ROPP caps on MCA bottle finish Crown capping head disabled. The current owner never used it and its condition is unknown. An engineer would need to assess what is required to bring it back into use Change parts 330ml, currently fitted 200ml Not included Conveyors, drive or accumulation table CIP system Also included Spare seals, wear parts and spares for the filling heads, pedestals, rinser and drive train Spare parts list Condition Last in production in August 2025, when it was fully operational. Now in storage. The owner describes the machine as well used and in working order, but needing an engineer to get it fully up to speed. Videos of it running are available on request. Electrical 400V, 50Hz, 3-phase, 4.5kW Dimensions Approx. 3.5m long x 1.4m wide x 2.1m high (2.6m at the capper) Weight: to be confirmed. Documentation EU Declaration of Conformity and operator manual (English) for this serial number. Location Aylesbury, UK. (in storage) Viewing by appointment

Year of construction: 2012, condition: used, 3 cylindroconical fermentation and storage tanks with frame and cone cooling Additional title: 3 pieces, with frame and cone cooling Total volume: 3000 l Pressure capacity: 3 bar Length: 1860 mm Width: 1860 mm Height: 3700 mm Material: stainless steel Hfsdpfjxwy Tpex Ap Esn Base construction: standing on feet Features: frame and cone cooling, sampling tap, DN50 connection; panel with valves;

Condition: like new (used), Year of construction: 2022, Reda STERILDOSE aseptic dosing unit Hsdsyil A Sopfx Ap Esfn Can be used as aseptic doser for dosing of any components into milk, juice and other beverages products Capacity: 3000 l/h New condition Dimensions LxWxH: 2650x1800x2230mm Location - Poland

Year of construction: 2017, condition: excellent (used), functionality: fully functional, We are offering this very well-maintained bulk material silo, including currently calibrated/certifiable weighing technology, year of construction 2017. This is a GRP (glass-fiber reinforced plastic) bulk silo (50 cbm) with certified weighing technology. Equipped with premium brand components (Reich Silo, Siemens Siwarex). The silo is drivable underneath and is currently used as a pellet filling station. Features: - GRP silo with 50 cbm capacity - Substructure with 3.0 m clearance height Hfsdpfx Apoy Ey Sqs Esn - Weighing system (weighing container, rotary valve, etc.) => dispensing possible down to 20 kg as the smallest delivered quantity - Loading unit/hose (can be fitted with bag attachment), height adjustable via manual winch - Control system (switch cabinet, EC card device/reader, receipt printer, data transmission, remote maintenance) Comprehensive documentation is available (structural calculations, foundation plans, etc.). Manufacturer: IFA (system integrator) Year of manufacture: 2017 Condition: very good Category ID: 399 Type: Bulk silo with certified weighing technology Location(s): Upon request (company address provided is not the silo location) If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2019, Overview This keg handling package consists of a M+F Keg Technik Monomat + RMT keg washing system, a keg filling unit, and a large quantity of stainless steel kegs in various sizes, complemented by beer taps. The system is suitable for small to medium-scale brewery operations, enabling cleaning and filling of kegs for beer distribution. The washer was manufactured in 2019 and offers a compact and efficient solution for keg processing. Technical data - Keg washer manufacturer: M+F Keg Technik - Keg washer model: Monomat + RMT - Year of manufacture: 2019 - Capacity: approx. 12 kegs/hour - Keg filler: Included (manufacturer unknown) - System type: Semi-automatic keg washing and filling setup Equipment Hedjy D Ertopfx Ap Esfn - Keg Technik Monomat + RMT keg washer - Keg filling system (standalone unit) - 195 x 30 L stainless steel kegs (Type S/A) - 39 x 50 L stainless steel kegs (Type S) - 22 x 20 L stainless steel kegs (Type A) - 22 x 10 L stainless steel kegs (Type S) - 10 x beer taps (various manufacturers)

Condition: used, KEG system, manufacturer: M+F, type: Micromat M 2/2, with 1 internal cleaning station and 1 filling station, equipped with detergent tank Hfsdpfxeyzhvij Ap Een