Double Motor Module

Siemens 6SL3120-2TE21-0AD0

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Like new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace working space: 360 x 400 mm Load: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Nljdpfxoiryyao Ac Ajg Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided.

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg The hydraulic unit is functional, the drive motor is in the removed state. Nljdpeic Rl Dofx Ac Aeg

Year of construction: 1971, condition: excellent (used), Horizontal internal broaching machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Type: RIW 16 x 1800 Year of manufacture: 1971 Max. Tractive force: 16t Max. Stroke: 1800mm Max. Cutting speed: 7m/min Max. Return speed: 25m/min Max. Tool diameter: Ø 95mm Nlodpfehpqquox Ac Asg Weight: 4,8to

Year of construction: 2006, condition: good (used), Agfa chiller (cooling system) for Agfa and Screen CTP systems. Nedpfx Aodtr A Toc Ajlg Inspected and tested.

Year of construction: 2015, condition: new, Vertical furnace height: 1100mm useable diameter: 790mm outside diameter: 1560 mm outer height (without lid): 1480mm outer height (with lid): 2300mm electrically heated: 40 kW circulating fan: 2,2 kW Njdpfecdi D Dox Ac Ajlg three-phase supply: 400 V, 50 Hz temperature: max. 750°C

Condition: used, mileage: 155,000 km, power: 51 kW (69.34 HP), first registration: 12/2009, fuel type: gasoline, next inspection (TÜV): 08/2025, color: red, gearing type: mechanical, emission class: euro4, number of seats: 4, Equipment: ABS, air conditioning, electronic stability program (ESP), immobilizer system, soot filter, Hello! We are pleased to welcome you. We are offering you the vehicle with the following equipment: Please be sure to leave us your telephone number in your message! * Heated seats * Electric windows on both sides * Air conditioning * Valid MOT until 08/2025 * Roof spoiler in vehicle color Nsdpfxjtxfn Ne Ac Ajlg * Individual interior styling package * Heated front seats * Individual styling package * Titanium X package 1 * Outside temperature display * On-board computer * Electric brake force distribution * Isofix mounts for child seat * Engine 1.2 liter - 51 kW 8V CAT * Rear seat split / foldable Our services: - Fresh TÜV+ASU - Delivery throughout Germany - Test drive possible at any time - Attractive financing conditions - Vehicle trade-in Opening hours also on Sundays by appointment

Condition: used, Year of construction: 2003, centre height 255 mm centre distance 1.080 mm turning diameter over bed 500 mm turning diameter over slide 290 mm turning length 1.000 mm control EuroTurn spindle bore 70 mm spindle taper KK 8 DIN 55027 3-jaw-chuck diameter 250 mm bed width 360 mm turning speed range 2 - 2.800 U/min rapid travel - longitudinal/face 10 / 5 m/min quick change toolholder PARAT Gr. 2 drive capacity - spindle motor 11,0 kW taper in tailstock-quill MK 5 dia. of quill 80 mm quill stroke 160 mm voltage 400 V total power requirement 16,0 kVA weight of the machine ca. 3,0 t dimensions of the machine ca. 2,85 x 1,60 x 1,80 m - Serial-No.: 495 / 03 - control: EuroTurn - quick change tool holder PARAT Nsdpfx Aewizltsc Aslg - coolant equipment - machine lamp

Condition: good (used), These listed powered tools, VDI 50, are designed for a tool changer manufactured by SAUTER and are in good condition and fully functional. They were used on a CNC turning machine, GILDEMEISTER CTX 600. 6 x powered tools, straight design, manufactured by NACKE + WTO, VDI 50 for tool turret manufactured by SAUTER: Item No.: XVI 24275 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 545.00 plus applicable VAT. Item No.: XVI 24277 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 400.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Nledpfx Acebql S Ho Aeg Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, Year of construction: 2026, _____Standard Equipment / Technical Data Engine Rated Power (ISO) 68 / 90 kW / hp at 2200 rpm Max. Power 71 / 95 kW / hp at 2000 rpm Max. Torque 405 Nm at 1500 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5 Controlled Turbocharger, SCR - Catalyst DOC - Diesel Oxidation Catalyst SCR Particulate Filter Catalyst Hood - single-piece, foldable Exhaust pipe on the right side in front of the cab Fuel tank capacity 198 liters / AdBlue 18 liters Transmission / PTO 16/16-speed Dyna-4, SpeedMatching, 40 km/h PowerControl operation on the left with load-sensing reversing gearbox, clutch operation, 4-stage load shifting with 1 lever, T-shuttle lever in the side console Partially automatic group shifting and Autotronic monitoring Permanently cooled wet disc clutches with independent lubrication system PTO: 540 / 540E / 1000, stub shaft 1 3/8", 6-spline Electrical engagement in the cab PTO START/STOP button on the rear, left fender Hydraulics / Lifting System Open Center system Quick coupler Cat. 2 Upper link control 4,300 daN maximum lifting force, 2 external lifting cylinders Adjustable lifting struts on both sides EHR with external control on both fenders Quick adjustable automatic drawbar coupling Electrical system Thermostart, 120 A alternator Power supply (12 Volt) for external devices with connector Axles / Additional Weights All-wheel drive front axle with switchable differential lock Rear axle ND with flange hub Oil-cooled disc brakes Front fender, width adjusted, rotatable Rear fender width 1.80 m, without extensions Front weight carrier with integrated drawbar and drawbar pin Driver's Seat Vibration-damped standard cab with standard roof, ventilation and heating Integrated safety frame with tinted glazing Doors on both sides with safety steps Steering column adjustable in height and inclination Air-suspended driver's seat with armrests, swivel adapter, safety belt Exterior & wide-angle mirrors Interior mirror Analog-digital instrument panel (SIS) Radio preparation with antenna and speakers 4 work lights front and rear on the cab roof 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders Nlsdpfx Acszpcvdo Aog Special Equipment: Fuel tank protection PowerControl & Brake on Neutral (clutch effect) 100 l/min, Open Center hydraulic system oil flow coupling (58+42 l/min) Front loader quick coupling system Leak oil collector on quick couplers 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return 2.5t front lift, 1 hydraulic line set, electrical socket MF front loader preparation: foundation set, hydraulic set, electrical control via joystick, PTO: 540/540E, flanged, 6-spline, internal engagement Rear fender extensions - 100mm Tires 480/70R38 & 380/70R28 Air conditioning Cab with mechanical suspension Telescopic exterior & wide-angle mirrors Passenger seat with belt Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter and armrests Rear window wiper / washer system Without MF Connect (MF Telemetry System)

Condition: ready for operation (used), Year of construction: 2021, operating hours: 435 h, total height: 1,065 mm, total width: 645 mm, overall weight: 114 kg, travel distance X-axis: 165 mm, product length (max.): 685 mm, number of axes: 3, Plastic 3D printer manufactured in 2021. This FORMLABS Fuse 1 features a build volume of 165 x 165 x 300 mm and a hopper capacity of 8.5 kg for PA12 nylon. It operates with a laser type of Ytterbium Fiber and has a maximum part size of 15.9 x 15.9 x 29.5 cm. If you are looking to get high-quality 3D printing capabilities, consider the FORMLABS Fuse 1 machine we have for sale. Contact us for further details. Formlabs Fuse 1 • Build Volume 165 x 165 x 300 mm 6.5 x 6.5 x 11.8 in • Layer Thickness 110 microns 0.004 in • Build Speed 10 mm per hour 0.39 in per hour • Laser Type Ytterbium Fiber • Laser Spot Size 200 microns 0.0079 in • Material Refresh Rate 30 to 50 percent • Hopper Capacity 8.5 kg PA12 nylon 18.7 lb • Dimensions 685 x 645 x 1065 mm • Maximum Part Size 15.9 x 15.9 x 29.5 cm 6.3 x 6.3 x 11.6 in • Minimum Access Dimensions 125.5 x 149.5 x 187.0 cm 49.4 x 59.0 x 73.6 in • Printer Dimensions 64.5 x 68.5 x 107 cm 165.5 cm with stand • Weight 114 kg • Startup Time 60 minutes • Operating Environment 18 to 28 degrees Celsius 68 to 82 Fahrenheit less than or equal to 30 percent humidity • Internal Temperature 200 degrees Celsius 392 Fahrenheit • Temperature Control Quartz tube heating elements PTC cartridges • Air Handling pressure controlled two stage filtration HEPA and carbon • Power Requirements EU 230 VAC 7.5 A US 120 VAC 15 A • Galvanometers Formlabs custom • Laser Wavelength 1065 nm • Laser Power maximum 10 watts • Beam Divergence 4.01 mrad • Laser Class Class 1 • Connectivity WiFi 2.4 GHz Ethernet 1000 Mbit USB 2.0 • Touchscreen 10.1 inch 1280 x 800 • Control Brand Formlabs • The display is damaged however this does not affect the function Fuse Sift OPTIONAL: Fuse Sift price on request • Fuse Sift Dimensions 99.1 × 61.0 × 188.8 cm 39.0 × 24.0 × 61.8 • Fuse Sift Weight 93 kg without build chamber or powder 205 lb • Build Chamber Dimensions 27.9 × 34.2 × 48.9 cm 11.0 × 13.5 × 19.3 in • Build Chamber Weight 11 kg 17.6 kg full with 20 percent packed powder 24.3 lb 38.8 lb • Build Volume 16.5 × 16.5 × 30.0 cm 6.5 × 6.5 × 11.8 in • Fresh Powder Hopper Capacity 8.5 kg Nylon 12 18.7 lb • Used Powder Hopper Capacity 9.1 kg Nylon 12 20 lb Nodpfx Aoy Sy Nvoc Aelg • Air Filtration Technology replaceable HEPA filter • Operating Environment 18 to 26 degrees Celsius 68 to 80 Fahrenheit less than or equal to 30 percent humidity • Air Handling negatively pressurized hood with replaceable HEPA filter independent venting system • Power Requirements EU 230 VAC 7.5 A dedicated circuit US 120 VAC 15 A dedicated circuit • Power Requirements high power vacuum EU 230 VAC 10 A US 120 VAC 20 A • Vacuum Requirements auxiliary vacuum with static dissipative grounded components • Sound Emission maximum 76.5 dB