Liquid chromatography LC MS/MS

Shimadzu LC-40Dx3 Triple Quad 6500+

Condition: used, This listing is for the Agilent Cary 1260 infinity HPLC system The units are in full working condition and are ready for immediate use The Agilent Cary 1260 Infinity HPLC system is a robust and versatile high-performance liquid chromatography platform engineered for reliability, high throughput, and analytical precision. It's widely used in pharmaceutical, environmental, food, and chemical analysis The system's modular architecture allows for tailored configurations, enabling users to select components such as pumps, detectors, and sample managers to meet specific analytical needs. This flexibility facilitates upgrades and maintenance, ensuring the system can evolve alongside technological advancements and changing laboratory requirements. This combination includes the following part Nos. G7111A Quat Pump G7111 Purge Valve G7129A Vial Sampler G7115A Diode Array Detector Chedsxv A Slepfx Ac Tsb G7115 Preparative Flow Cell 160 Infinity R1 Detector Pressure Range: Up to 600 bar, accommodating smaller particle size columns for higher resolution and faster separations. Supports a wide flow range, up to 10 mL/min at 200 bar, suitable for standard to semi-preparative applications. Injection Volume: Flexible injection volumes ranging from 0.1 µL to 1800 µL, depending on the configuration and options selected. Column Capacity: Supports up to four columns with direct access to each column through a Quick-Change switching valve, enhancing flexibility and eliminating the need to disconnect and reconnect columns. Temperature Control: Features efficient column handling and temperature control, with options for multiple temperature zones, ensuring optimal conditions for various applications.

Condition: good (used), Agilent HPLC system - including PC & software The list price includes the following 1100 series modules: - tray - degasser - pump - autosampler - column oven - VWD detector We can built almost any kind of HPLC setup according to your need. For the exact pricing please inquire. Available modules: Brand Series Model Type Quantity Agilent 1100 G1310A ISO pump 1 Agilent 1100 G1311A Quat pump 4 Agilent 1100 G1313A ALS 1 Agilent 1100 G1314A VWD 7 Agilent 1100 G1315A DAD 1 Agilent 1100 G1315B DAD 4 Agilent 1100 G1316A Column Oven 1 Agilent 1100 G1318A Column Oven 6 Agilent 1100 G1329A ALS 1 Agilent 1100 G1330A ALS Therm 1 Agilent 1100 G1330B ALS Therm 1 Agilent 1100 G1361A Prep pump 2 Agilent 1100 G1367A Well plate auto sampler 4 Agilent 1100 G1376A CAP pump 1 Agilent 1100 G1379A Degasser 4 Agilent 1100 G1379B Degasser 4 Agilent 1100 G2260A Prep ALS 1 Agilent 1200 G1315D DAD 1 Agilent 1200 G1330B FC/ ALS Therm 1 Agilent 1200 G1364C Analytical FC 1 Agilent 1200 G1367B Well plate ALS 1 Csdpfjvk U Ncsx Ac Tjhb Agilent 1260 G1314F VWD 1 Agilent 1290 G1330B Thermostat 2 Any questions please feel free to ask. Please check out our other listings as well.

Condition: used, Year of construction: 1969, total height: 2,000 mm, total width: 2,300 mm, total length: 2,000 mm, Colour: Grey Empty weight: 3.800 kg - Year: 1969 - Documentation available: No - CE certificate present: No - Serial number: 9327 - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 420 - Z-axis travel [mm]: 710 - Table length [mm]: 1520 - Table width [mm]: 385 - Tool holder: ISO50 - Main spindle power [kW]: 11 - Min. spindle speed [rpm]: 25 - Max. spindle speed [rpm]: 2000 - Transport dimensions: 2000mm x 2300mm x 2000mm (l x w x h) - Transport weight [kg]: 3800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Cjdoyzhdmepfx Ac Tohb Lukas van Rossum

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, Rated voltage: 100V AC±10% Power consumption: 340VA Rotary microtome The LEICA RM2155 is a robust, fully motorized rotary microtome designed for the precise production of thin sections from paraffin- or resin-embedded samples for histological, pathological, and materials analysis applications. The instrument combines motorized automation with manual fine control, ensuring reproducible sectioning quality even at high throughput rates. Technical features: - Motorized sectioning with adjustable speed and motorized coarse advance, optimizing workflow for routine and demanding specimens. - Adjustable section thickness range from 0.5 µm to 60 µm with fine increments to accommodate varying material requirements. - Specimen advance: 27 mm via stepper motor - Vertical stroke: 70 mm - Maximum sectioning range without retraction: 65 mm (without specimen orientation) - Maximum sectioning range with retraction: 60 mm - Specimen retraction in motorized cutting mode: 10, 30, 70 µm (adjustable depending on speed, can be deactivated) Cjdpfx Asytrpvoc Tohb - Specimen retraction in manual cutting mode: 5, 10, 15, 20 µm (can be deactivated) - Movability of knife holder base: N/S travel ±25 mm, E/W travel ±20 mm - Maximum specimen size (WxHxD): 50 x 60 x 40 mm - Specimen orientation: horizontal 8°, vertical 8°, rotation ±90°, trimming steps 5, 15, 30 µm - Electric coarse drive: 900 µm/s Cutting motor: - Cutting speed: 0; 0.5 – 420 mm/s - Return stroke speed: approx. 120 – 420 mm/s Application areas: Production of consistent tissue sections for microscopic analysis in histology, pathology, neuropathology, as well as in materials science investigations; suitable for both research and routine laboratory environments with high demands on sectioning precision and reproducibility. The LEICA RM2155 stands out for its technical reliability, precise sectioning performance, and versatile application possibilities, making it a long-term investment for demanding laboratory processes. Including: power cable, knife holder base, knife holder NZ, standard chamber, foil chamber, carbide knife (16 cm), manual

Condition: good (used), Hach DR 3800 VIS Spectrophotometer The DR 3800 is a VIS spectrophotometer with a wavelength range from 320 to 1100 nm. The instrument comes with a complete set of application programs and supports multiple languages. The DR 3800 spectrophotometer includes the following Programs and operating modes: Stored Programs (pre-installed tests), Barcode Programs, User Programs, Favorites, Single Wavelength, Multi-Wavelength, Wavelength Scan, and Time Scan. The DR 3800 Spectrophotometer performs digital measurements in units of concentration, absorbance, or % transmittance. When a user-generated or programmed procedure is selected, a structured menu system and prompts guide the user through the test. This menu system can also generate reports, statistical evaluations of generated calibration curves, and reports on instrument diagnostic tests. Display modes: transmittance (%), absorbance, and concentration Light source: Halogen lamp Wavelength range: 320-1100 nm Wavelength accuracy: ± 1.5 nm (wavelength range 340-900 nm) Wavelength reproducibility: 0.1 nm Wavelength resolution: 1 nm Wavelength calibration: automatic Wavelength selection: automatic, depending on selected method Scanning speed: = 12 nm/s (in 1 nm steps) Spectral bandwidth: 5 nm Photometric measuring range: ± 3.0 Ext (wavelength range 340-900 nm) Photometric accuracy: 5 mExt at 0.0-0.5 Ext; 1 % at 0.50-2.0 Ext Stray light: < 0.1 % T at 340 nm with NaNO2 Data memory: 1000 measured values (result, date, time, sample ID, user ID) User programs: 50 Meter dimensions and environmental conditions: Width 368 mm; height 144 mm; depth 359 mm; weight 6.4 kg Ambient conditions (operation): 10-40 °C, max. 80 % relative humidity (without condensation) Ambient conditions (storage): -40-60 °C, max. 80 % relative humidity (without condensation) External power supply: 100-240 V/50-60 Hz (input); 15 V/30 VA (output) Interfaces: Use only shielded cables with max. 3 m length. 1 x USB type A; 1 x USB type B Housing protection class: IP3X Circuit classification: Device: Class III; System: Class II Item condition: used Financing through our bank is also possible. Chsdpfxeiuzvxe Ac Tob komplett-konzept.leasingo.de More items - new and used - you can find in our store! International shipping costs on request!

Condition: excellent (used), Agilent 7890B gas chromatograph with autosampler, software, and computer included in the set. The device has only undergone testing and has not been used in operation. Chjdpfxox A E D Dj Ac Tsb

Condition: used, This listing is for the Peak Scientific Corona Nitrogen Generator 1010 paired with the Corona Air Compressor. The unit is in full working condition and is ready for immediate release. System Details: The Peak Scientific Corona Nitrogen Generator 1010, paired with the Corona Air Compressor, is engineered to meet the demands of labs requiring high-purity nitrogen, specifically designed for applications like chromatography. The Corona 1010 is ideal for the Thermo Scientific Corona Veo Charged Aerosol Detector and is also suitable for LC, HPLC, and UHPLC applications, providing nitrogen flows up to 5 L/min at 80 psi. Key Features: Chsdpoxwc Iisfx Ac Tsb Maximum Gas Flow: 5 L/min Maximum Output Pressure: 80 psi (5.5 bar) Maximum Purity:

Year of construction: 2022, condition: ready for operation (used), I am offering a Shimadzu GC MS, TQ8040 NX, Nexis GC-2030 gas chromatograph in perfect condition. Gas chromatography/triple quadrupole mass spectrometry (GC/MS) Due to the sensitivity of the device, on-site disassembly and personal pickup are required. Cjdpfoy Tmlyox Ac Tohb Please check out my other listings, where you will find many more devices from a closed laboratory.

Condition: excellent (used), Mettler Toledo Model: TGA/DSC 3+ Mettler Toledo TGA/DSC 3+ HT Thermoanalysis System + GC401 + XP5U + Huber Ministat – incl. STAR Software & Dongle For sale is a complete, fully operational thermoanalysis system from Mettler Toledo in high-temperature configuration (up to approx. 1600 °C), including software license (STARᵉ) with hardware lock (dongle). System configuration: - TGA/DSC 3+ (combined thermogravimetry + DSC) - High-temperature furnace (HT, up to approx. 1600 °C) - Sensor: FRS2 SDTA - Gas controller: GC 401 - Microbalance: XP5U - Temperature control system: Huber Ministat 230-MT (Pilot ONE) - Software: STARᵉ Software Version 16.00b - License: Hardware lock (USB dongle, green) Software & license: Included in delivery: - STARᵉ Software (Version 16.00b) - Original hardware lock (USB dongle) Functions: - Thermogravimetry (TGA) – Mass change (µg range) - DSC / SDTA – Heat flow measurement (mW range) - Temperature analyses up to high-temperature range - Measurements under defined gas atmosphere Technical data (excerpt): - Temperature range: RT up to approx. 1600 °C - Heating rate: typically 10 K/min - Gas flow: Air: 30 ml/min Nitrogen: 20 ml/min - Temperature accuracy: Indium: ±1.5 °C Aluminum: ±2.5 °C Gold: ±3.0 °C Palladium: ±4.0 °C - Weighing accuracy: 1 g: ±50 µg 5 g: ±250 µg Temperature control unit Huber Ministat 230-MT: - Temperature range: -40 °C to +200 °C - Voltage: 230 V - Power consumption: max. 11 A Dimensions & weight: - Total weight: approx. 100–150 kg - Multi-component system (laboratory equipment) Scope of delivery: - Complete TGA/DSC system - High-temperature furnace - GC 401 gas controller Chedpfx Aoyxcqvec Tjb - XP5U balance - Huber Ministat 230-MT - STARᵉ Software incl. USB dongle - Documentation and accessories as shown in the photos Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors!) For further inquiries, please feel free to contact us by phone.

Condition: used, Merck Millipore Direct Detect spectrometer enabling fast, accurate protein quantification with infrared technology for research laboratories. Csdpfxexzidre Ac Tjhb