Gear motor 0.37 kW 43 rpm

SEW-EURODRIVE RF27 DT71D4/TF

Condition: used, Gear motor, electric motor Gsdpfx Aob A R Aqjayoca -Speed: 430 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Weight: 11 kg

Condition: used, mileage: 197,000 km, Year of construction: 1987, Serial number: YB1E4A111HB41xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20551 Specifications: Model year: 1987 Mileage: approx. 197,000 km Transmission: Manual Crane: HMF 453-K2 Crane reach: approx. 6 meters Air horn Gcodpswph Eaefx Aayea Tires (see photos) Dimensions: Length: 713 cm Width: 250 cm Curb weight: 4,720 kg Engine power: 90 hp Description:Volvo FL4 flatbed truck with HMF crane, sold as a repair project. Significant repairs should be expected. The truck was deregistered in 2017 and has been standing still since then. The crane was functional when parked, but has not been tested recently. There is a crack in the chassis.Sold as-is. Ready for delivery. Km: 197000 HK: 90 Technical approved: no EU-approved until: 28.02.2018 Own weight: 4720 Total Weight: 7490 Payload: 2695 Width: 250 Length: 713 Model: FL4 Gearbox: Manual

Condition: ready for operation (used), Used machine Injection molding machine Manufacturer Krauss Maffei KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock Gcodpfx Aju Ti Sroayja No delivery time, available immediately Viewing possible by appointment The machine is no longer powered / No cooling water connection The machine is stored properly Technical data: Clamping force (kN) 800 kN Clamping plate (mm) 610×610 Bar spacing (mm) Installation height (mm) 250 Plate spacing (mm) 750 Control MC4 Screen text German Injection unit screw diameter (mm) 45 Injection pressure (bar) 1878 Displacement (cm³) 275 Pump drive power (kW) 18.5 Heating power (kW) 13 Oil filling (l) 270 Dimensions (m) 4.3 x 1.4 x 2.1 Total weight 3.2 tons More photos on request.

Condition: repair required (used), functionality: limited functionality, machine/vehicle number: 221910295, Year of construction: 1989, load capacity: 1,750 kg, lifting height: 3,000 mm, load center: 500 mm, fuel type: electric, mast type: triplex, gearing type: mechanical, battery capacity: 480 Ah, battery voltage: 48 V, fork carriage width: 100 mm, fork length: 1,000 mm, fork width: 100 mm, fork thickness: 40 mm, ground clearance: 60 mm, overall weight: 3,140 kg, total height: 2,100 mm, total length: 3,000 mm, total width: 1,000 mm, Equipment: lighting, pallet forks, sideshift, The battery of the forklift was recently replaced. Battery type 24/6 PzS 480, battery serial number 1114597 Charging station included. Gjdpfx Aewmlkhjaysca The forklift has always been operational. When the ignition of the forklift is switched off, it continues to function. The battery must be disconnected to switch off the forklift. Some refurbishment work is required.

Condition: used, mileage: 600,000 km, Year of construction: 1997, Serial number: YS2R6X2000122xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20740 Specifications: Km: Approx. 600,000, printer has been replaced Manual transmission Suspension: Steel - Air Gcjdpfx Aowvy Iteaysa Tires (see pictures) 20T hook w/knuckle Multilift superstructure Trailer hitch Bed Ready for delivery Notes: Driveable on the surface, doesn't pull uphill as it should Some costs must be calculated here. Km: 600000 Technical approved: no EU-approved until: 10.06.2022 Own weight: 11500 Total Weight: 29000 Payload: 17425 Width: 250 Length: 820 Euro: 2 Gearbox: Manual

Condition: used, mileage: 1,100,000 km, Year of construction: 2005, Serial number: YS2R6X2000200xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21048 Specifications : - 2005 model - Mileage: approx. 1,100,000 - Not EU approved since 2016 - Euro 3 - Wheelbase: 490 cm - Tires (see pictures) - Tool cabinet - Broken taillight - Automatic Gsdpfxew Ia E Us Aayeca - 2x beds - Radio - Delivery by appointment Description : 2005 Scania R500 container truck with lift. ECT. The reason for the repair object is that the car has not been used for 9 years and it must be expected to cost money to get it in order. The car is big, but the owner says it only needs a booster to get it started. Delivery by arrangement. Km: 1100000 Technical approved: no Own weight: 1 Model: R500

Condition: used, mileage: 700,000 km, Year of construction: 2005, Serial number: YS2R6X2000200xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21047 Specifications : - 2005 model - Km: approx. 700,000, new engine approx. 220,000 - Not EU approved since 2016 !! - Wheelbase: 470/136 cm - Tires (see pictures) - Spring: air - Retarder - Battery back Gcsdpow Ia Enjfx Aayja - Tool cabinet - Automatic - Bed - AC/climate - Radio - Delivery by appointment   Description : 2005 Scania R500 container truck with lift and replaced engine. ECT. According to the owner, the car has done 700,000 km, it is very old so this should be double checked. The car has had the engine replaced which Owner says it has done around 220,000 km. The reason for the repair object is that the car has been standing for 10 years, which must be taken into account in the cost of the car to get it EU-approved. Delivery by arrangement. Km: 700000 Technical approved: no Own weight: 1 Model: R500

Condition: new, Year of construction: 2025, Fully automatic liquid filling machine with 6 filling heads for filling volumes of different alternative ranges e.g. 50-500ml – customized configurations are possible. The volume is adjustable within the filling range by adaptation of the capacity of the air cylinder – uncomplicated controlled by software, without using additional modules. Operating principle: feeding of the bottles via infeed conveyor, positioning of the bottles, feeding of the filling needles into the bottles, filling by filling lances, exact dosing controlled by air cylinders. Electronic components: PLC and Touchscreen by SIEMENS, optical sensors by Sick. Pneumatic parts predominantly by AIRTAC. CIP (cleaning in place system) is customizable via software and hardware. - Specifications: number of filling heads: 6; max. speed of the machine in neutral: 35 cycles/minute; accuracy: depending on chosen filling range and real filling volume; stainless steel version SS304 – all parts in contact with the filling material are made of SS316; power: 220V, 0.5kW; compressed air: 4-6bar, 0,4m³; machine dimensions LxBxH: 3500x1350x1800mm; weight: 850kg. - Mounting of servo motors instead air cylinders for dosing possible at a surcharge. Machine dimensions of servo version LxWxH: 3500x1350x1900mm. Gjdpfxev Nk Rto Aayoca That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), Motovario NMRV 050 angular gear i=5.0 , serial no. according to photo , hole spacing of mounting holes: 53 x 53 mm, Ø bore for input shaft: 25 mm (input side) , hole spacing of mounting holes: 92 x 92 mm, Ø bore for input shaft: 14 mm (output side) ,used, minor signs of wear, 100% functional Gcodsi D I Txopfx Aayoa