Scissor lift table 350 kg

Seco SHT35

Condition: good (used), For sale is a container bundle consisting of 3 x 20-foot containers. The units are insulated office or residential containers, each featuring a single-leaf entrance door and a secondary door with wind protection on one end, as well as two tilt-and-turn windows on the opposite end. The containers are fully equipped and ready for use, with electrical wiring (including fuse box), multiple power outlets, lighting, and electric radiators. Previously used as residential containers, they are in good, weather-tight condition. Each container features an exterior 400-Volt connection (with pass-through available). The listed price applies to all three containers when purchased as a package. Transport can be arranged upon request. The containers can be delivered to your desired location and positioned precisely using the crane mounted on the delivery vehicle. Any additional transport costs due to distance will need to be clarified in advance. Pjdpfx Aoh Hx Nhjg Derd

Condition: excellent (used), SCM S520 thicknesser Working width 520mm Working height 250mm Feed speed adjustable: 4 steps Shaft with conventional knives Pedpfjitkx Eox Ag Djrd 4 knife shaft Power 4kw Weight 670kg

Condition: new, New equipment, made in Denmark. Lifting time: 18 secs. Prodped Hp Efefx Ag Djd Loading and unloading by means of pallet truck. Items are lifted to an ergonomically correct working height. Remote controlled lifting/lowering with emergency stop. Consumption 0,75 kW. Capacity: 1000 kg. Voltage: 3 x 400 V. Minimal lifting height: 80 mm. Maximal lifting height: 780 mm. External dimensions: 1420 x 1140 mm. Internal free space: 585 mm. Lifting / lowing speed: 42 / 48 mm/s. Weight: 235 kg.

Condition: excellent (used), Precision lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: WEILER, lead screw lathe type commodor 42 -Machine bed: hardened -Turning length: 900 mm -Turning Ø over bed: 400 -Turning Ø over support: 190 mm -Spindle bore: Ø 56 mm -Spindle speeds: 45 - 2000 rpm -Three-jaw chuck: Röhm Ø 200 mm Predpfx Agjxapm Ro Dod -Four-jaw chuck: Röhm Ø 200 mm -Tailstock mount: MK3 -Drive: 4 kW -Accessories: 18x Multifix tool holder with rotating center see photos -Lathe dimensions: 2200/1300/H1410 mm -Weight of lathe: 1380 kg

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Pedpfx Aek Egrpeg Dsrd Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Year of construction: 2022, condition: new, No. 04320 Edge grinding machine VOLPATO LVO 150 T New machine, 100% made in ITALY Year of construction 2022 Immediately available from stock Combined edge sanding machine with multiple work options. Independently motorized belt oscillation, mechanically adjustable up to a maximum stroke of 20 mm. The complete sanding unit can be swiveled up to 45° from the vertical, every angle in between is continuously adjustable. In the basic setting, designed as a 1-station solid sanding machine, it can be converted in a very short time for precise veneer sanding using the veneer edge sanding device included in the scope of delivery. Thanks to the 1-place solution, the machine can also be set up against a wall to save space. The basic equipment includes a 5-part set of grinding wheels (Ø 25-30-35-40-45-50 mm). By using different belt grains, you can achieve different surface finishes and degrees of wood removal. Belt dimensions 2640 mm Abrasive belt width 150 mm Working table 940x460 mm Sanding belt speed 15 m/s Belt drive motor 4 kW Motor for oscillation 0.15 kW Diameter driven roller Ø 75 mm Additional work table 350 x 300 mm Sanding rolls Ø 25 – 30 – 35 – 40 – 45 – 50 Swing stroke 15 mm Diameter dust hood Ø 100 mm Including operating instructions in English Including confirmation of compliance with CE standards Other scope of delivery as shown Terms of delivery: from stock Transport dimensions approx. 1650 x 1100 x 1350 mm LWH Weight approx. 250 kg Visitation on site possible by appointment Technical information, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale The manufacturer's warranty regulations apply to new machines Prodpfx Ajia N Nxeg Ded

Condition: new, Year of construction: 2025, WLTB stroller characteristics: The WLTB transport trolley combines ease of use, lightness and mobility. Thanks to this device, lifting and handling half pallets and stacking packages is significantly improved. We especially recommend our product to companies that deal with the storage and transport of goods, photocopiers, heat pumps, beehives or fireplaces. Adjusting the width of the forks with a maximum length of 535 mm is quick and hassle-free, making the truck easy to use and adapting to various types of loads with a maximum spacing of 520 mm. The trolley has a maximum load capacity of 200 kg, which makes it an ideal solution for smaller and medium-sized loads, and thanks to the ergonomic and specialized hydraulic foot pump enabling stepless adjustment of the fork height in the range of 55 - 900 mm, working with the trolley is comfortable and does not require much physical exercise. Our product is equipped with a bottle lift that allows it to be stopped at any height at any time. Prsdpfx Agericl Ho Ded The simple design of the stroller is very strong and durable, which guarantees a long service life. Another advantage of the WLTB transport trolley is its universal operation, which makes operating the stacker intuitive. Rollers made of polyurethane mounted at the bottom of the pallet truck, wheels made of solid rubber and handles with rubber grips are adapted to move on uneven surfaces and are responsible for the stability of the transported goods. Thanks to the drawbar, the trolley is easy to maneuver and allows safe transport over short and long distances, and the lack of jump locks guarantees safety when loading and unloading goods. We are convinced that our WLTB transport trolley is the perfect solution for your business because it ensures quick and efficient warehouse service, and your loads will be transported safely and comfortably. Advantages of the WLTB transport trolley: Rubber grips in the trolley allow you to safely transport goods. Fork height adjustment in the range of 55 - 900 mm via an ergonomic foot pump. Additional polyurethane rollers installed at the bottom of the trolley support the stable transport of goods Quick and easy adjustment of the fork width load capacity up to 200 kg a specialized hydraulic pump enables stepless lowering of the forks very strong construction (long service life) of the pallet truck wheels and rollers suitable for uneven surfaces: polyurethane on the drawbar Technical parameters Load capacity 200 kg Minimum lifting height 55 mm Maximum lifting height 900 mm Fork length 535 mm Maximum fork spacing 520 mm Single fork width 70 mm Wheel size Ø 250 x 60 Dimensions 830 x 730 x 1240 mm Weight 40 kg We kindly inform you that the stroller requires self-assembly.

Condition: used, Year of construction: 1997, bore capacity in steel (diameter) 40 mm arm length 1.000 mm workpiece height max. 1.250 mm table-size 1.150 x 690 mm spindle taper MT 4 spindle turning speed range 40 - 1.400 U/min feed range 0,08 - 0,40 mm/min crossrail adjustment horizontal 800 mm crossrail adjustment vertical 700 mm spindle stroke 220 mm power requirement 3,5 kW voltage 380 V total power requirement 4,0 kW weight of the machine ca. 1,6 t Psdpfxjl Ha Two Ag Dsrd - Serial-No.: A01/446/97 - adjustable cube table 600 x 500 x 500 mm - coolant device - machine light

Condition: new, FACTORY-NEW MACHINING CENTER HEIDENHAIN TNC 7 digital path control HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 650 mm Y-axis: 700 mm Z-axis: 645 mm Table diameter: 410 mm Maximum workpiece diameter: 500 mm Maximum spindle speed: 12,000 rpm (oil-cooled with MQL) Spindle taper: SK 40-BIG PLUS (BVD 40) Maximum spindle motor power: 17 kW ICS – internal coolant supply – 20 bar Rapid traverse X, Y & Z: 30,000 mm/min Predpshy Artsfx Ag Dsd Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm ATC – automatic tool changer with double gripper: 30 stations (expandable up to 80 tools optional) Hinged belt chip conveyor Full enclosure Only inquiries from Germany will be answered / Only inquiries from Germany will be processed.

Condition: used, Pillar drilling machines Prodjb N Ezrepfx Ag Dsd